Abstract:Wide bandgap (WBG) semiconductor devices are developing rapidly due to their superior performance compared to traditional silicon-based devices. However, the packaging technology of traditional devices has limited the application of WBG semiconductor devices because of the challenges in electrical insulation. The complex environment of high blocking voltage, high frequency, and high temperature is the major reason for insulation failure of encapsulation structure. Therefore, in this article, an epoxy resin composite with nonlinear conductivity is proposed to be used as a coating to improve the electric field distribution of high-voltage high-power IGBT modules. First, an electrical field simulation model was built considering the thermal stress. It was found that the electric field in high temperature was improved compared with that in room temperature due to the temperature-dependent conductivity of silicone gel. Nevertheless, the risk of insulation failure still exists. After the application of nonlinear conductivity materials (NCMs) coating, the maximum electric field at the triple junctions and the ratio of electric field distortion in high field areas were significantly decreased. Further analysis showed that the optimization ratio of electric field increased with the increase of the blocking voltages or power losses in the IGBT chip. The results have demonstrated that the NCMs can reduce the maximum electric field in the IGBT encapsulation structure by 73% under the operating conditions of 120 W 10 kV. Partial discharge (PD) tests show that the partial discharge initial voltage (PDIV) of the substrates with NCM coating is increased by 33% compared with the normal encapsulation structure and the coating significantly inhibits the growth of electric trees. The presented results indicate that the NCMs have the potential to improve the insulation performance of high-voltage high-power IGBT modules.

Metal Injected Copper Carbon Nanotube Composite Material with High Thermal Conductivity and Low CTE for IGBT Power Modules

Carbon Nanotube/Copper composites for via filling and thermal management

Heat conduction and thermal expansion of copper–graphite composite as a heat sink

Thermal dissipation media for high power electronic devices using a carbon nanotube-based composite

Synergistic enhancing effect of tungsten-copper coated graphite flakes and aluminum nitride nanoparticles on microstructure, mechanical and thermal properties of copper matrix composites

Fabrication, mechanical and thermal properties of tungsten-copper coated graphite flakes reinforced copper matrix composites

Meaningful improvements on structural-thermal-electronic properties of copper based on 3D nitrogen (N) doped-carbon nanotubes (CNTs) interface fabricated by nano-self-assembly-sintering-modification

Thermal interface material with graphene enhanced sintered copper for high temperature power electronics

Thermally conductive epoxy composites with efficient heat transfer pathways by in-situ growth of CNTs on oriented BNNS

Copper/carbon nanotube composite interconnect for enhanced electromigration resistance

Controllable Construction of CNT-Interconnected Liquid Metal Networks for Thermal Management

Development of Printed Circuit Boards with High Thermal Conductivity and Low Thermal Expansion by Applying Cu-Mo Composite Materials

The Carbon Nanotube Based Nanocomposite with Enhanced Thermal Conductivity

Cu/oriented-carbon nanotubes composite with ultralow thermal contact resistance

Electric Field Mitigation in High-Voltage High-Power IGBT Modules Using Nonlinear Conductivity Composites

Highly Deformable Thermal Interface Materials Enabled by Covalently-Bonded Carbon Nanotubes

Advances of CNT-based Systems in Thermal Management

Improving electromagnetic engineering of thermal conductive composites by establishing continuous thermal conductive networks with gradient impedance

Liquid Metal Composites with Enhanced Thermal Conductivity and Stability Using Molecular Thermal Linker

Indium Assisted Multiwalled Carbon Nanotube Array Thermal Interface Materials

Synergistically improved mechanical, thermal, and ampacity performances of carbon nanotube/copper composite conductors based on network confinement effects