Abstract:Due to the increasing demand for high-power density of electronic devices, the technological enhancement of thermal interface materials (TIMs) is of crucial importance for further advancement of the issue of thermal management. Graphene displayed a huge possibility for the advancement of thermal interface materials because of its extreme, high thermal conductivity. Modest quantities of 2D (two-dimensional) graphene sheets are typically mixed into a polymer matrix to manufacture the nanocomposites with enhanced functional or mechanical properties. A simplistic and useful method to bond a few-layer graphite (AFLG) and AgNWs with polydimethylsiloxane (PDMS), print on the high thermal conductivity three-dimensional (3D) structure fiber with different ratios of Cu powder, the corresponding composite with the improvement of thermal conductivity is made. The thermal conductivity of composites with 20 wt% AFLG and AgNWs at 2.0 mg/mL displays an increase when the Cu particles loading of 2.5 to 7.5 wt% adding. The effect is attributed to the intercalation of spherical copper particles between other fillers that come out of the formation of the percolation network with high thermal conductivity. Thermal conductivity of through-plane (KZ) 5.96 W/mK and in-plane (Kx) 41.7 W/mK are achieved in composites with 7.5 wt% copper particle loading. Consequently, the process in this study endows these nanocomposites with high thermal conductivity. Besides, the proposed nanostructure-tailored nanocomposites are promising for surface variations with time during heating and cooling. The results brightly show the interaction between the Cu particles and above fillers in the nanocomposites and demonstrate the potential of the hybrid nanocomposites in the field of TIMs for practical applications. The novelty and contribution of this study integrate the comprehensive benefits of AgNWs, Cu, and PDMS that lie in the low-cost fabrication method via the interconnection of 1D/2D/3D nanostructures based on hybrid supported fillers for enhanced thermal interface to fabricated thermal interface materials with new architectures. The ball-milled-structured Cu powder is added to 2D-structured AFLG and enhanced the in-plane thermal conductivity by about 2 times. The through-plane thermal conductivity was enhanced by about 1.18 times. The multiple fillers structure not only brings the process easier to achieve but is also environmentally friendly in the era of a highly polluted world.

Thermal interface material with graphene enhanced sintered copper for high temperature power electronics

Highly conductive thermal interface materials with vertically aligned graphite-nanoplatelet filler towards: High power density electronic device cooling

Metal-Level Thermally Conductive yet Soft Graphene Thermal Interface Materials

Vertically Aligned Graphene for Thermal Interface Materials

A Hierarchically Structured Graphene/Ag Nanowires Paper as Thermal Interface Material

Enhancing thermal transport of epoxy composite with vertically aligned graphene in-situ grown on the thermal interface

Fabrication of copper powder hybrid supported fillers with interconnected 1D/2D/3D nanostructures for enhanced thermal interface materials properties

Enhanced thermal properties of epoxy composites by constructing thermal conduction networks with low content of three-dimensional graphene

Synergistic enhancing effect of tungsten-copper coated graphite flakes and aluminum nitride nanoparticles on microstructure, mechanical and thermal properties of copper matrix composites

Comprehensive excellent performance for silicone-based thermal interface materials through the synergistic effect between graphene and spherical alumina

Scalable Compliant Graphene Fiber-Based Thermal Interface Material with Metal-Level Thermal Conductivity via Dual-Field Synergistic Alignment Engineering

Molybdenum copper based ultrathin two-phase heat transport system for high power-density gallium nitride chips

Aluminum/Graphene Thermal Interface Materials with Positive Temperature Dependence

Improvement of interfacial thermal resistance between TIMs and copper for better thermal management

Enhancement of Thermal Management Performance of Copper Foil Using Additive–Free Graphene Coating

Liquid metal incorporated graphene oxide films with enhanced through-plane thermal conductivity and flame resistance

Soft and Self‐Adhesive Thermal Interface Materials Based on Vertically Aligned, Covalently Bonded Graphene Nanowalls for Efficient Microelectronic Cooling

Graphene Interlayer for Enhanced Interface Thermal Conductance in Metal Matrix Composites: an Approach Beyond Surface Metallization and Matrix Alloying

Highly Thermally Conductive and Flexible Thermal Interface Materials with Aligned Graphene Lamella Frameworks

Surface Modification Using Polydopamine-Coated Liquid Metal Nanocapsules for Improving Performance of Graphene Paper-Based Thermal Interface Materials

Phenylamine-Functionalized Graphene–Copper Composites with High Thermal Conductivity: Implications for Thermal Dissipation