Abstract:Due to the increasing demand for high-power density of electronic devices, the technological enhancement of thermal interface materials (TIMs) is of crucial importance for further advancement of the issue of thermal management. Graphene displayed a huge possibility for the advancement of thermal interface materials because of its extreme, high thermal conductivity. Modest quantities of 2D (two-dimensional) graphene sheets are typically mixed into a polymer matrix to manufacture the nanocomposites with enhanced functional or mechanical properties. A simplistic and useful method to bond a few-layer graphite (AFLG) and AgNWs with polydimethylsiloxane (PDMS), print on the high thermal conductivity three-dimensional (3D) structure fiber with different ratios of Cu powder, the corresponding composite with the improvement of thermal conductivity is made. The thermal conductivity of composites with 20 wt% AFLG and AgNWs at 2.0 mg/mL displays an increase when the Cu particles loading of 2.5 to 7.5 wt% adding. The effect is attributed to the intercalation of spherical copper particles between other fillers that come out of the formation of the percolation network with high thermal conductivity. Thermal conductivity of through-plane (KZ) 5.96 W/mK and in-plane (Kx) 41.7 W/mK are achieved in composites with 7.5 wt% copper particle loading. Consequently, the process in this study endows these nanocomposites with high thermal conductivity. Besides, the proposed nanostructure-tailored nanocomposites are promising for surface variations with time during heating and cooling. The results brightly show the interaction between the Cu particles and above fillers in the nanocomposites and demonstrate the potential of the hybrid nanocomposites in the field of TIMs for practical applications. The novelty and contribution of this study integrate the comprehensive benefits of AgNWs, Cu, and PDMS that lie in the low-cost fabrication method via the interconnection of 1D/2D/3D nanostructures based on hybrid supported fillers for enhanced thermal interface to fabricated thermal interface materials with new architectures. The ball-milled-structured Cu powder is added to 2D-structured AFLG and enhanced the in-plane thermal conductivity by about 2 times. The through-plane thermal conductivity was enhanced by about 1.18 times. The multiple fillers structure not only brings the process easier to achieve but is also environmentally friendly in the era of a highly polluted world.

Fabrication of copper powder hybrid supported fillers with interconnected 1D/2D/3D nanostructures for enhanced thermal interface materials properties

Facile fabrication of three-dimensional thermal conductive composites with synergistic effect of multidimensional fillers

Copper nanowires embedded in boron nitride nanosheet-polymer composites with enhanced thermal conductivities for thermal management

Vertically Interconnected Structure Enhances the Thermal Management Capability of Copper-Based Composites

Synergistic enhancing effect of tungsten-copper coated graphite flakes and aluminum nitride nanoparticles on microstructure, mechanical and thermal properties of copper matrix composites

Multi‐contact hybrid thermal conductive filler Al 2 O 3 @ AgNPs optimized three‐dimensional thermal network for flexible thermal interface materials

GMP/Al2O3/ZnO/PDMS thermal interface materials with anisotropic thermal conductivity and electrical insulation ability obtained by 3D‐printing method

Multi‐contact Hybrid Thermal Conductive Filler Al2O3@AgNPs Optimized Three‐dimensional Thermal Network for Flexible Thermal Interface Materials

Enhanced thermal conductivity and isotropy of polymer composites by fabricating 3D network structure from carbon‐based materials

Innocuous, Highly Conductive, and Affordable Thermal Interface Material with Copper-Based Multi-Dimensional Filler Design

Bioinspired Functional Composites for Enhanced Thermally Conductivity via Fractal-Growth CuNP Fillers

Toward Effective Synergetic Effects from Graphene Nanoplatelets and Carbon Nanotubes on Thermal Conductivity of Ultrahigh Volume Fraction Nanocarbon Epoxy Composites

Thermal conductive nylon 6 composites using hybrid fillers to construct a three‐dimensional thermal conductive network

Thermally Conductive Polydimethylsiloxane-Based Composite with a Three-Dimensional Vertically Aligned Thermal Network Incorporating Hexagonal Boron Nitride Nanosheets and Nanodiamonds

Copper Modified Boron Nitride And Graphene Combined To Self-Assemble Three-Dimensional Thermal Conductivity Framework to Improve the Thermal Conductivity of Epoxy Resin

Hydrophilic Cu-Graphene Heterostructure Fillers for the Enhancement of the Thermal Performance of Poly(vinyl Alcohol)-Based Composites

Thermal Interface Materials with Sufficiently Vertically Aligned and Interconnected Nickel-Coated Carbon Fibers under High Filling Loads Made Via Preset-Magnetic-field Method

A double mixing process to greatly enhance thermal conductivity of graphene filled polyamide 6 composites

Synchronously Improved Thermal Conductivity and Mechanical Property for Polybenzimidazole Composites by Building the Ternary Hybrid Nanofillers Networks

Nano-capsuled thermal interface materials filler using defective multilayered graphene-coated silver nanoparticles

Enhanced the Thermal Conductivity of Polydimethylsiloxane via a Three-Dimensional Hybrid Boron Nitride@Silver Nanowires Thermal Network Filler