Abstract:This article explores a novel post‐oxidization process for producing highly piezoelectric zinc oxide (ZnO) thin films. Statistical methods are used in conjunction with extensive material characterization to provide a thorough investigation and optimization of the films. Linear statistical interpolation and modelling are also utilized to provide a deep understanding of the relationship between newfound deposition parameters and piezoelectricity. This work presents a study of piezoelectric zinc oxide (ZnO) thin films deposited by a novel post‐reactive sputtering method. The process utilizes a rotating drum with DC magnetron sputtering deposition onto substrates with subsequent DC plasma‐assisted oxidation of the deposited metal to metal oxide. The paper analyzes the influence of plasmaassisted magnetron sputtering (PA‐MS) deposition parameters (O2 plasma source power, O2 flow, and Ar flow) on the morphological, structural, optical, and piezoelectric properties of ZnO thin films. Design of experiments has been utilized to evaluate the role of these parameters on the growth rate (rg) and the properties of resulting films. Results indicate a predominant influence of the plasma power on the rg over other parameters. Among the eight tested samples, three of them show high crystal quality with high intensity (0001) diffraction peak, characteristic of the wurtzite crystalline structure of ZnO, and one of them exhibits piezoelectric coefficient values of ≈11pC N−1. That sample corresponding to a ZnO film deposited at the lowest rg of 0.075 nm s−1, confirmed the key role of the deposition parameters on the piezoelectric response of films, and demonstrated PA‐MS as a promising technique to produce high‐quality piezoelectric thin films.

Preparation of piezoelectric ZnO films by target facing type of sputtering method

Zno-based Thin Films Synthesized by Atmospheric Pressure Mist Chemical Vapor Deposition

Mist CVD Growth of ZnO-Based Thin Films and Nanostructures

On the Piezoelectric Properties of Zinc Oxide Thin Films Synthesized by Plasma Assisted DC Sputter Deposition

Room-temperature Remote-Plasma Sputtering of C-Axis Oriented Zinc Oxide Thin Films

Parametric Study of Zirconium Oxide Films Using Plasma‐Based Ion Implantation and Deposition

Study on technology of zinc oxide piezoelectric thin film device with surface micromachining substrate

Deposition and Characterization of Sputtered ZnO Films

Magnetron Sputtering of ZnO Thick Film for High Frequency Focused Ultrasonic Transducer

Characteristics of ZnO Films Prepared by Ultrasonic Spray Pyrolysis Method

V-Doped Zno Thin Films Prepared by Rf Magnetron Sputtering

Growth of C-Axis Orientation ZnO Films on Polymer Substrates by Radio-Frequency Magnetron Sputtering

Reactive Radiofrequency Sputtering-Deposited Nanocrystalline ZnO Thin-Film Transistors

Electron-cyclotron-resonance plasma etching of the ZnO layers grown by molecular-beam epitaxy

Growth of ZnO Film by Plasma-assisted MOCVD

Surface Development of Polyethylene Terephthalate Films Using Low-Pressure, High-Frequency Argon + Oxygen Plasma on Zinc Powder for Dye-Sensitized Solar Cells

Plasma-induced Surface Textures of ZnO:Al Transparent Conductive Films

Preparation and Properties of High (002) Orientation ZnO-Li+ Films

Reactive ion etching of piezoelectric Pb(Zr[sub x]Ti[sub 1−x])O[sub 3] in a SF[sub 6] plasma

Research of Deposition Condition and Structural Properties of ZnO Films Grown by RF Magnetron Sputtering

Deposition of ZnO Films with C-Axes Lying in R-sapphire Substrate Planes