Abstract:The performance of high frequency, single-element transducers depends greatly on the mechanical and electrical properties of the piezoelectric materials used. This study compares the design and performance of transducers incorporating different materials. The materials investigated include 1-3 lead zirconate titanate (PZT) fiber composite, lead titanate (PbTiO3) ceramic, poly(vinylidene fluoride) (PVDF) film, and lithium niobate (LiNbO3) single crystal. All transducers were constructed with a 3-mm aperture size and an f-number between 2 and 3. Backing and matching materials were selected based on design goals and fabrication limitations. A simplified coaxial cable tuning method was employed to match the transducer impedance to 50 ohms for the PZT fiber composite and PbTiO3 ceramic transducers. Transducers were tested for two-way loss and -6 dB bandwidth using the pulse/echo response from a flat quartz target. Two-way loss varied from 21 to 46 dB, and bandwidths measured were in the range from 47 to 118%. In vitro ultrasonic backscatter microscope (UBM) images of an excised human eye were obtained for each device and used to compare imaging performance. Both press-focusing and application of a lens proved to be useful beam focusing methods for high frequency. Under equal gain schemes, the LiNbO3 and PbTiO3 transducers provided better image contrast than the other materials.

Magnetron Sputtering of ZnO Thick Film for High Frequency Focused Ultrasonic Transducer

Microstructure and Optical Properties of ZnO Films Deposited by Radio-frequency Reactive Magnetron Sputtering

A novel method to fabricate full-kerfed highfrequency (>100 MHz) ultrasonic array transducers

A Novel Method for Fabrication of High-Frequency (> 100 Mhz) Zno Ultrasonic Array Transducers on Silicon Substrates

V-Doped Zno Thin Films Prepared by Rf Magnetron Sputtering

Microstructure and Properties of Cu-Doped Zno Films Prepared by Dc Reactive Magnetron Sputtering

Solidly Mounted Resonators Fabricated for GHz Frequency Applications Based on MgxZn1-xO Piezoelectric Film

ZnO film for application in surface acoustic wave device

A Self-Aligned Mask-Free Fabrication Process for High-Frequency ZnO Array Transducer

Study on technology of zinc oxide piezoelectric thin film device with surface micromachining substrate

Pulsed-laser deposition of piezoelectric-coefficient modulated multilayered films ZnO/Al2O3 on silicon and their enhanced acoustic resonance

Investigation of High-Quality ZnO Film on Polycrystalline Diamond Wafer for Fabrication of High Frequency SAW Filter

Deposition of High-Quality Zinc Oxide Thin Films on Diamond Substrates for High-Frequency Surface Acoustic Wave Filter Applications

Modification of Microstructure on PZT Films for Ultrahigh Frequency Transducer.

Sputtered ZnO film on aluminium foils for flexible ultrasonic transducers.

Electrode Loading Effect and High Temperature Performance of Zno Thin Film Ultrasonic Transducers

Design Study on SAW Devices Based on ZnO/Si Structure

Preparation of Piezoelectric-Coefficient Modulated Multilayer Film ZnO/Al2O3 and Its Ultrahigh Frequency Resonance

Effects of Sputtering Conditions on Properties of ZnO Films Prepared by RF Magnetron Sputtering for SAW Applications

Design, fabrication, and evaluation of high frequency, single-element transducers incorporating different materials

The influence of different doping elements on microstructure, piezoelectric coefficient and resistivity of sputtered ZnO film