Abstract:Surface acoustic waves (SAWs) are of practical importance across several fields. Particularly, a wide range of SAW devices is available, which are based on the stacking piezoelectric layered hetero-structures. As such, efficient and stable algorithm of analyzing electromechanical coupling factor (K2) should be of specific interest, inspiring a variety of piezoelectric layered structures. Motivated by the above considerations, this paper exploits the performance of Sc43% AlN57%/ZnO/diamond piezoelectric hetero-structures using matrix and polynomial methods. Consequently, dispersion curves, the electromechanical coupling factor and profiles of Rayleigh waves are calculated, in which the properties of hexagonal intermediate ZnO layer are varied. Here, $$ (0001) - [10\bar{1}0]{\text{ZnO}} $$ or $$ (11\bar{2}0) - [0001]{\text{ZnO}} $$ directions of the middle layer were integrated with Sc43% AlN57%/diamond to be a composite hetero-structure with a larger K2 of SAW. Accordingly, a commercial ZnO specimen was characterized by scanning electron microscopy (SEM) as well as Raman and XRD spectroscopy to determine its available crystallographic directions and the C-axis hexagonal character. Comparing with conventional AlN/diamond hetero-structures, the inclusion of ZnO as the intermediate layer provides with an excellent electromechanical coupling factor which significantly improves the $$ (11\bar{2}0) - [0001] $$ structure. However, comparing with the ZnO/diamond hetero-structure, a high phase velocity (Vph) was observed. Therefore, the development of a well-balanced structure that maximizes the values of Vph and K2 is systematically challenging. Moreover, it was found that initial stresses have a significant effect on the Rayleigh wave velocities. Fundamental A0 Lamb mode can be generated in piezoelectric hetero-structures when the properties of substrate remain very low relative to the film. Numerical results obtained in this paper can provide a deeper insight into the nature of the Rayleigh wave behaviors in piezoelectric hetero-structures, involving a ZnO intermediate layer.

Preparation of Piezoelectric-Coefficient Modulated Multilayer Film ZnO/Al2O3 and Its Ultrahigh Frequency Resonance

Pulsed-laser deposition of piezoelectric-coefficient modulated multilayered films ZnO/Al2O3 on silicon and their enhanced acoustic resonance

Pulsed Laser Deposition and Acoustic Property of Piezoelectric / Nonpiezoelectric Multilayer Films

Influence of a Piezoelectric ZnO Intermediate Layer on Rayleigh Waves Propagating in Sc 43% AlN 57% /zno/diamond Hetero-Structures Subjected to Uniaxial Stress

Solidly Mounted Resonators Fabricated for GHz Frequency Applications Based on MgxZn1-xO Piezoelectric Film

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Ultrahigh frequency properties of discontinuous CoFeB/SiO_2 multilayer films with high resistivity

Magnetron Sputtering of ZnO Thick Film for High Frequency Focused Ultrasonic Transducer

Thickness-Dependent Monoclinic Phases and Piezoelectric Properties Observed in Polycrystalline (pb0.94la0.04)(zr0.60ti0.40)o3 Thin Films

Preparation and Characterization of Al-doped ZnO Films and the Properties of the Composite Films with Ferroelectric Films

Microstructure-related Piezoelectric Properties of a ZnO Film Grown on a Si Substrate

Preparation and Properties of High (002) Orientation ZnO-Li+ Films

Microstructure and Properties of Cu-Doped Zno Films Prepared by Dc Reactive Magnetron Sputtering

Pulsed Laser Reactive Ablation of (0001)-Textured ZnO Optical Waveguiding Films on Α-Sio2

Multiferroic and Piezoelectric Behavior of Transition-Metal Doped ZnO Films

V-Doped Zno Thin Films Prepared by Rf Magnetron Sputtering

Investigation of High-Quality ZnO Film on Polycrystalline Diamond Wafer for Fabrication of High Frequency SAW Filter

Giant Piezoelectric Effect Induced by Porosity in Inclined ZnO Thin Films

Giant Piezoelectric Properties of ZnO Film Doped with Acceptor-Donor Ionic Pair

Microstructure and Electronic Properties of Al/Zr/Linbo3 Multilayers

The influence of different doping elements on microstructure, piezoelectric coefficient and resistivity of sputtered ZnO film