Abstract:The performance enhancement of integrated circuits relying on dimension scaling (i.e., following Moore's Law) is more and more challenging owing to the physical limit of Si materials. Monolithic three-dimensional (M3D) integration has been considered as a powerful scheme to further boost up the system performance. Two-dimensional (2D) materials such as MoS 2 are potential building blocks for constructing upper-tier transistors owing to their high mobility, atomic thickness, and back-end-of-line (BEOL) compatible processes. The concept to integrate 2D material-based devices with Si field-effect transistor (FET) is technologically important but the compatibility is yet to be experimentally demonstrated. Here, we successfully integrated an n-type monolayer MoS 2 FET on a p-type Si fin-shaped FET with 20 nm fin width via an M3D integration technique to form a complementary inverter. The integration was enabled by deliberately adopting industrially matured techniques, such as chemical mechanical planarization and e-beam evaporation, to ensure its compatibility with the existing 3D integrated circuit process and the semiconductor industry in general. The 2D FET is fabricated using low-temperature sequential processes to avoid the degradation of lower-tier Si devices. The MoS 2 n-FETs and Si p-FinFETs display symmetrical transfer characteristics and the resulting 3D complementary metal-oxide-semiconductor inverter show a voltage transfer characteristic with a maximum gain of ~38. This work clearly proves the integration compatibility of 2D materials with Si-based devices, encouraging the further development of monolithic 3D integrated circuits.

A Stacked Cmos Technology on Soi Substrate

Three-Dimensional Stacked-Fin-Cmos Integrated Circuit Using Double Layer Soi Material

Stacked 3-D Fin-CMOS Technology

A Three-Dimensional Stacked Fin-Cmos Technology for High-Density ULSI Circuits

Novel Localized-SOI MOSFET's Combining the Advantages of SOI and Bulk Substrates for Highly-Scaled Devices

Experimental Results on Drain and Source on Insulator MOSFETs Fabricated by Local SIMOX Technology

Experimental investigation of Quasi-SOI MOSFET for highly scaled devices

Ge CMOS Technology with Advanced Interface and Junction Engineering.

(Invited) III-V/Ge CMOS Device Technologies for High Performance Logic Applications

Design-Technology Co-Optimization for Stacked Nanosheet Oxide Channel Transistors in Monolithic 3D Integrated Circuit Design

MOS interface control of high mobility channel materials for realizing ultrathin EOT gate stacks

Stacked Lateral Gate-All-Around Metal–Oxide–Semiconductor Field-Effect Transistors and Their Three-Dimensional Integrated Circuits

Monolithic 3D Integration of Vertically Stacked CMOS Devices and Circuits with High-Mobility Atomic-Layer-Deposited In2O3 N-Fet and Polycrystalline Si P-Fet: Achieving Large Noise Margin and High Voltage Gain of 134 V/V

Drain and Source on Insulator MOSFETs Fabricated by Local SIMOX Technology

Stacked Lateral Double-Diffused Metal-Oxide-semiconductor Field Effect Transistor with Enhanced Depletion Effect by Surface Substrate

Vertically Stacked Silicon Nanowire Transistors Fabricated by Inductive Plasma Etching and Stress-Limited Oxidation

High-Performance CMOS Inverter Array with Monolithic 3D Architecture Based on CVD-Grown N-Mos2 and P-Mote2.

HIGHLY SCALED CMOS DEVICE TECHNOLOGIES WITH NEW STRUCTURES AND NEW MATERIALS

Quasi-Soi Mosfet: A Novel Architecture Combining the Advantages of Soi and Bulk Devices

Three-dimensionally stacked poly-Si TFT CMOS inverter with high quality laser crystallized channel on Si substrate

Monolithic 3D integration of back-end compatible 2D material FET on Si FinFET