Abstract:Amorphous oxide semiconductor (AOS) field-effect transistors (FETs) have been integrated with complementary metal-oxide-semiconductor (CMOS) circuitry in the back end of line (BEOL) CMOS process; they are promising devices creating new and various functionalities. Therefore, it is urgent to understand the physics determining their scalability and establish a physics-based model for a robust device design of AOS BEOL FETs. However, the advantage emphasized to date has been mainly an ultralow leakage current of these devices. A device modeling that comprehensively optimizes the threshold voltage (VT), the short-channel effect (SCE), the subthreshold swing (SS), and the field-effect mobility (µFE) of short-channel AOS FETs has been rarely reported. In this study, the device modeling of two-steps oxygen anneal-based submicron indium-gallium-zinc-oxide (IGZO) BEOL FET enabling short-channel effects suppression is proposed and experimentally demonstrated. Both the process parameters determining the SCE and the device physics related to the SCE are elucidated through our modeling and a technology computer-aided design (TCAD) simulation. In addition, the procedure of extracting the model parameters is concretely supplied. Noticeably, the proposed device model and simulation framework reproduce all of the measured current-voltage (I-V), VT roll-off, and drain-induced barrier lowering (DIBL) characteristics according to the changes in the oxygen (O) partial pressure during the deposition of IGZO film, device structure, and channel length. Moreover, the results of an analysis based on the proposed model and the extracted parameters indicate that the SCE of submicron AOS FETs is effectively suppressed when the locally high oxygen-concentration region is used. Applying the two-step oxygen annealing to the double-gate (DG) FET can form this region, the beneficial effect of which is also proven through experimental results; the immunity to SCE is improved as the O-content controlled according to the partial O pressure during oxygen annealing increases. Furthermore, it is found that the essential factors in the device optimization are the subgap density of states (DOS), the oxygen content-dependent diffusion length of either the oxygen vacancy (VO) or O, and the separation between the top-gate edge and the source-drain contact hole. Our modeling and simulation results make it feasible to comprehensively optimize the device characteristic parameters, such as VT, SCE, SS, and µFE, of the submicron AOS BEOL FETs by independently controlling the lateral profile of the concentrations of VO and O in two-step oxygen anneal process.

Design-Technology Co-Optimization for Stacked Nanosheet Oxide Channel Transistors in Monolithic 3D Integrated Circuit Design

Monolithic Three‐dimensional Integration of Aligned Carbon Nanotube Transistors for High‐performance Integrated Circuits

Monolithic 3D Integration of Vertically Stacked CMOS Devices and Circuits with High-Mobility Atomic-Layer-Deposited In2O3 N-Fet and Polycrystalline Si P-Fet: Achieving Large Noise Margin and High Voltage Gain of 134 V/V

Monolithic three-dimensional integration of complementary two-dimensional field-effect transistors

Stacked Lateral Gate-All-Around Metal–Oxide–Semiconductor Field-Effect Transistors and Their Three-Dimensional Integrated Circuits

Design Technology Co-Optimization for Gate-All-Around Nanosheet Transistors Considering Source/Drain Confinement and Post- Gate Single Diffusion Break

Three-Dimensional Stacked-Fin-Cmos Integrated Circuit Using Double Layer Soi Material

(Invited) III-V/Ge CMOS Device Technologies for High Performance Logic Applications

A Machine Learning Approach for Optimization of Channel Geometry and Source/Drain Doping Profile of Stacked Nanosheet Transistors

Design and Performance Optimization of Dopingless Vertical Nanowire TFET Using Gate Stacking Technique

Engineering Top Gate Stack for Wafer-Scale Integrated Circuit Fabrication Based on Two-Dimensional Semiconductors

A Nanosheet Oxide Semiconductor FET Using ALD InGaOx Channel for 3-D Integrated Devices

Optimizing Ultra‐thin 2D Transistors for Monolithic 3D Integration: A Study on Directly Grown Nanocrystalline Interconnects and Buried Contacts

Three-Dimensional Flexible Complementary Metal-Oxide-Semiconductor Logic Circuits Based on Two-Layer Stacks of Single-Walled Carbon Nanotube Networks.

FDSOI Process Based MIV-transistor Utilization for Standard Cell Designs in Monolithic 3D Integration

Three-dimensional integrated metal-oxide transistors

A Dual-Gate Vertical Channel IGZO Transistor for BEOL Stackable 3D Parallel Integration for Memory and Computing Applications

Improved MEOL and BEOL Parasitic-Aware Design Technology Co-Optimization for 3 Nm Gate-All-Around Nanosheet Transistor

Monolithic Heterogeneous Integration of BEOL Power Gating Transistors of Carbon Nanotube Networks with FEOL Si Ring Oscillator Circuits

Facile 3D Integration of Si Nanowires on Bosch-etched Sidewalls for Stacked Channel Transistors

Device modeling of two-steps oxygen anneal-based submicron InGaZnO back-end-of-line field-effect transistor enabling short-channel effects suppression