616 MHz Repetition Rate Sub-100Fs Amplifier-Similariton Yb:Fiber Laser

Chen Li,Guizhong Wang,Tongxiao Jiang,Peng Li,Aimin Wang,Zhigang Zhang

2014-01-01

Abstract:We report a compact Yb:fiber ring laser operated at 616 MHz. The average output power is 450 mW at a pump power of 900 mW. The dechirped pulse width is 98 fs.

What problem does this paper attempt to address?

Femtosecond Amplifier Similariton Yb:fiber Laser at a 616 MHz Repetition Rate.

Chen Li,Guizhong Wang,Tongxiao Jiang,Peng Li,Aimin Wang,Zhigang Zhang

DOI: https://doi.org/10.1364/ol.39.001831

IF: 3.6

2014-01-01

Optics Letters

Abstract:We report a compact Yb:fiber ring laser operated at 616 MHz. The average output power is 450 mW at a pump power of 900 mW. The dechirped pulse width is 98 fs.
750 MHz Fundamental Repetition Rate Femtosecond Yb:fiber Ring Laser.

Chen Li,Guizhong Wang,Tongxiao Jiang,Aimin Wang,Zhigang Zhang

DOI: https://doi.org/10.1364/ol.38.000314

2013-01-01

Abstract:We report a compact Yb:fiber ring laser operated at 750 MHz. The average output power is 210 mW at a pump power of 1.8 W. The dechirped pulse width is 68 fs.
66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

minglie hu,lu chai,weidong shen,xu liu,chingyue wang,han chi,bowen liu,youjian song

DOI: https://doi.org/10.1364/fbta.2014.fth4f.3

2014-01-01

Abstract:We present a mode-locked all-normal-dispersion double-clad Yb-doped fiber laser with 3 W output average power at 81 MHz repetition rate for 37 nJ chirped pulses, which can be compressed to 66 fs, with 400 KW peak power.
Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Xiang Zhang,Yi Wang,Bin Liu,Chunhua Wang,Zhen Xiang,Chong Liu

DOI: https://doi.org/10.1364/ao.53.005058

IF: 1.9

2014-01-01

Applied Optics

Abstract:A pulsed laser for laser guide stars with a 100 MHz repetition rate and 1 ns pulse width was achieved by external modulation of a continuous wave (CW) laser with a 70 kHz spectrum width. The laser is amplified first by two fiber pre-amplifiers and then by four solid-state power amplifiers. The laser achieves gains as high as 36 dB in the fiber pre-amplifiers due to the long gain medium length. The output power from the fiber amplifiers is 2.1 W. The laser receives further amplification in the solid-state amplifiers and retains good beam quality by aberration compensation. The final output average power is 102.9 W, and the beam quality factor M-2 is 1.46. The laser reaches high power without spectrum width and pulse width broadening at the 100 MHz repetition rate. The spectrum width of the pulsed laser is less than 0.8 GHz, which is close to the Fourier transform limit. Such a laser with single-frequency, high-repetition, and high-power features along with good beam quality will be valuable for many research areas. (C) 2014 Optical Society of America
330 Mhz Repetition Rate Femtosecond Yb:Fiber Ring Laser

Peng Li,Aimin Wang,Xi Wang,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo_si.2011.cms4

2011-01-01

Abstract:We demonstrate 330 MHz repetition rate operation in a ring cavity Yb:fiber laser with novel and compact devices. The spectral bandwidth of the pulse is 30 nm and the dechirped pulse width is 48 fs. (C) 2010 Optical Society of America
330Mhz, Sub 50fs Yb: Fiber Ring Laser

Peng Li,Aimin Wang,Xi Wang,Zhigang Zhang

DOI: https://doi.org/10.1016/j.optcom.2012.01.035

IF: 2.4

2012-01-01

Optics Communications

Abstract:We demonstrate 330MHz repetition rate operation in a ring cavity Yb:fiber laser with an innovative wavelength-division-multiplexing collimator to raise the repetition rate. The spectral bandwidth of the pulse is 30nm and the dechirped pulse width is 48fs. The output power is 70mW with 600mW, 975nm pump laser diode.
503Mhz Repetition Rate Femtosecond Yb: Fiber Ring Laser with an Integrated WDM Collimator.

Aimin Wang,Hongyu Yang,Zhigang Zhang

DOI: https://doi.org/10.1364/oe.19.025412

IF: 3.8

2011-01-01

Optics Express

Abstract:We demonstrate 503MHz fundamental high repetition rate operation in a ring cavity passively mode-locked Yb:fiber laser incorporating a novel wavelength-division-multiplexing collimator and a piece of all-solid photonic bandgap fiber. The Yb doped fiber was directly fabricated as one fiber pigtail into the functional collimator, greatly shortening the cavity length and facilitating the splicing operation. A 5cm long photonic bandgap fiber with abnormal dispersion at the lasing wavelength (centered at 1030nm) decreases the net dispersion for shorter output pulses. The spectral bandwidth of the pulse was 34nm. The direct output pulse was measured to be 156fs and the dechirped pulse was about 76fs. With this innovative Yb:fiber pigtailed WDM collimator, the ring cavity laser has the potential to work at a repetition rate up to GHz.
1 GHz Repetition Rate Ring Cavity Femtosecond Yb:fiber Laser

Chen Li,Xiang Gao,Guizhong Wang,Tongxiao Jiang,Aimin Wang,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo_si.2014.sw3e.2

2014-01-01

Abstract:We demonstrate the first 1 GHz fundamental repetition rate ring cavity ytterbium doped fiber laser. The laser delivers 600 mW, 64fs near transform-limited pulses and supports direct octave-spanning spectrum generation.
73 Nj, 109 Fs Yb-doped Fiber Laser at 19 MHz Repetition Rate in Amplifier Similariton Regime

Yizhou Liu,Yifan Cui,Jian Zhang,Aimin Wang,Zhigang Zhang

DOI: https://doi.org/10.1364/prj.3.000248

IF: 7.6

2015-01-01

Photonics Research

Abstract:We report femtosecond pulse generation in an amplifier similariton oscillator and a prechirped fiber amplifier system. The final output power is 1.4W, and the fundamental repetition rate is 19.1 MHz after a single state fiber amplifier. The pulsewidth is 109 fs.
97-Watt, 1.08-Gigahertz Repetition Rate, Femtosecond Yb:fiber Laser Source

Yan Wang,Yizhou Liu,Zhigang Zhang,Franz X. Kartner

DOI: https://doi.org/10.1364/cleopr.2020.c2a_2

2020-01-01

Abstract:We demonstrate a femtosecond ytterbium-doped fiber laser at 1030 nm with 1.08 GHz repetition rate, 97 W average output power using chirped pulse amplification (CPA). The compressed output pulse width is 233 fs.
Amplification of 1.08 GHz Repetition Rate Femtosecond Laser Pulses to 97 W Average Power by a Fiber Amplifier

Yan Wang,Yizhou Liu,Zhigang Zhang,Franz Kaertner

DOI: https://doi.org/10.1364/osac.423499

2021-01-01

OSA Continuum

Abstract:We demonstrate a femtosecond Yb:fiber laser amplification system which delivers 97 W average output power at a repetition rate of 1.08 GHz using a rod-type photonic crystal fiber. The re-compressed output pulse is 233 fs. Numerical simulation was also conducted in agreement with our experimental results.
Sub-50fs Pulse Generation Directly from a 750 MHz Repetition Rate Dispersion Managed Yb:fiber Ring Laser

Chen Li,Guizhong Wang,Tongxiao Jiang,Aimin Wang,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo_si.2013.ctu3j.8

2013-01-01

Abstract:We demonstrate sub-50 fs pulses generation directly from a 750 MHz repetition rate dispersion managed Yb: fiber ring laser by precision compensation of the intracavity dispersion.
325 Mhz and Near Transform-Limited Pulse Output Directly from an Er:Fiber Ring Laser

Hongxia Qi,Jian Zhang,Gengji Zhou,Aimin Wang,Zhigang Zhang

DOI: https://doi.org/10.3788/col201311.061402

IF: 2.56

2013-01-01

Chinese Optics Letters

Abstract:A compact Er:fiber ring laser operated at a fundamental repetition rate of 325 MHz is reported. Two gain fibers with opposite dispersion are employed to shorten the fiber laser cavity for high repetition rate and soliton-like pulse generation without losing gain and compactness. The spectral bandwidth of the output pulse is 24 nm and the direct pulse duration is 123 fs without extra-cavity compression, which are values near the transform-limited range.
10 W, Sub-100 Fs Fiber Amplifier Based on a Self-Referenced 750-Mhz Yb:fiber Laser Frequency Comb

Bo Xu,Yuxuan Ma,Hirotaka Ishii,Fei Meng,Isao Matsushima,Zhigang Zhang,Kaoru Minoshima

DOI: https://doi.org/10.1364/cleo_si.2018.stu4k.6

2018-01-01

Abstract:We developed a polarization maintained Yb:fiber amplifier based on the self-referenced 750-MHz Yb:fiber laser frequency comb. 10 W average power and sub-100 fs pulse were achieved without deteriorating the high coherence of the comb.
Efficient femtosecond pulse generation in an all-normal-dispersion Yb:fiber ring laser at 605 MHz repetition rate.

Hongyu Yang,Aimin Wang,Zhigang Zhang

DOI: https://doi.org/10.1364/OL.37.000954

IF: 3.6

2012-01-01

Optics Letters

Abstract:We report a 1030 nm-wavelength Yb:fiber laser that produces the shortest/direct output pulse duration (502 fs) among all-normal-dispersion fiber lasers at the highest repetition rate (605 MHz) among the passively fundamentally mode-locked fiber lasers. The laser also exhibits an optical efficiency of 70% at CW and 65% at mode-locking modes. (C) 2012 Optical Society of America
Yb-Doped Fiber Chirped Pulse Amplification System Delivering 1 mJ, 231 fs at 1 kHz Repetition Rate

Haitao Zhang,Jiaqi Zu,Decai Deng,Haozhen Xu,Junyu Chen

DOI: https://doi.org/10.3390/photonics9020067

IF: 2.536

2022-01-01

Photonics

Abstract:In this paper a single-channel chirped pulse amplification laser system based on Yb-doped photonic crystal fiber was constructed, which achieved a pulse energy output of 1 mJ with a beam quality close to the diffraction limit. Pulsed synchronous pumping was used to suppress amplified spontaneous emission at a repetition rate of 1 kHz. The de-chirped pulse width of 231 fs was achieved by precise systematic dispersion control, and the corresponding peak power reached 3.85 GW.
Ytterbium-Doped Mode-Locked Fiber Laser at Hundreds of Khz Repetition Rate

Chun Zhou,Lingling Chen,Yue Cai,Meng Zhang,Ling Ren,Peng Li,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo.2009.jtud67

2009-01-01

Abstract:A long ring-cavity, low repetition rate Yb-doped fiber laser was demonstrated. Pulses with repetition rate of about 381.3 kHz and single pulse energy above 300 nJ were obtained.
72-Kw High-Peak-power Linearly-Polarized Single-Mode Pulsed Fiber Laser with 80 Khz Repetition Rate and 4.5 Ns Duration

J. He,P. Yan,X. Wushouer,J. Zhou,M. Gong

DOI: https://doi.org/10.1134/s1054660x10230052

IF: 1.2

2010-01-01

Laser Physics

Abstract:We reported a 26 W linearly polarized single-mode Yb-doped photonic crystal fiber amplifier, working at 80 kHz repetition rate with 4.5 ns duration, corresponding 72 kW peak power. Using a acousto-optic Q-switched Nd:YVO4 laser as the seed source, the 26 W average power of 1064 nm laser was obtained at a repetition rate of 80 kHz from a Yb-doped photonic crystal fiber amplifier, with 4.5 ns duration, polarization extinction ratio 11 dB and M 2 < 1.2.
1.2 GHz Repetition Rate Stretched-pulse from a Femtosecond Solid-state Yb: Fiber Laser

Ya Wang,Ruoao Yang,Zhendong Chen,Duo Pan,Bin Luo,Zhigang Zhang,Jingbiao Chen

DOI: https://doi.org/10.1364/fio.2023.fd2.5

2023-01-01

Abstract:A 1.2 GHz, 106 fs stretched-pulse mode-locked laser was demonstrated, with > 700 mW output power. To the best of our knowledge, this is the highest repetition rate from NPE mode locked Yb: fiber lasers.
High Repetition Rate All-Normal Dispersion Yb:fiber Laser for Minimum Pulses

Hongyu Yang,Aimin Wang,Yunfeng Ma,Zhongwei Fan,Gang Niu,Jin Yu,Yang Liu,Xue Zhang,Zhigang Zhang

DOI: https://doi.org/10.3788/col201210.033201

IF: 2.56

2012-01-01

Chinese Optics Letters

Abstract:Simulation and experimental results for high repetition rate all-normal dispersion Yb:fiber ring lasers are demonstrated for the cavity dispersion from 0.01 to 0.025 ps 2 .The simulation shows that the pulse spectrum has the potential to reach>30 nm for the dispersion of 0.014 ps 2 under practical pump power. This potential is proved by the experiment.Maximum spectral width of 30 nm is achieved at the repetition rate of 285 MHz under the 850-mW pump power.Average output power is 550 mW and dechirped pulse is 78 fs.

616 MHz Repetition Rate Sub-100Fs Amplifier-Similariton Yb:Fiber Laser

Femtosecond Amplifier Similariton Yb:fiber Laser at a 616 MHz Repetition Rate.

750 MHz Fundamental Repetition Rate Femtosecond Yb:fiber Ring Laser.

66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

330 Mhz Repetition Rate Femtosecond Yb:Fiber Ring Laser

330Mhz, Sub 50fs Yb: Fiber Ring Laser

503Mhz Repetition Rate Femtosecond Yb: Fiber Ring Laser with an Integrated WDM Collimator.

1 GHz Repetition Rate Ring Cavity Femtosecond Yb:fiber Laser

73 Nj, 109 Fs Yb-doped Fiber Laser at 19 MHz Repetition Rate in Amplifier Similariton Regime

97-Watt, 1.08-Gigahertz Repetition Rate, Femtosecond Yb:fiber Laser Source

Amplification of 1.08 GHz Repetition Rate Femtosecond Laser Pulses to 97 W Average Power by a Fiber Amplifier

Sub-50fs Pulse Generation Directly from a 750 MHz Repetition Rate Dispersion Managed Yb:fiber Ring Laser

325 Mhz and Near Transform-Limited Pulse Output Directly from an Er:Fiber Ring Laser

10 W, Sub-100 Fs Fiber Amplifier Based on a Self-Referenced 750-Mhz Yb:fiber Laser Frequency Comb

Efficient femtosecond pulse generation in an all-normal-dispersion Yb:fiber ring laser at 605 MHz repetition rate.

Yb-Doped Fiber Chirped Pulse Amplification System Delivering 1 mJ, 231 fs at 1 kHz Repetition Rate

Ytterbium-Doped Mode-Locked Fiber Laser at Hundreds of Khz Repetition Rate

72-Kw High-Peak-power Linearly-Polarized Single-Mode Pulsed Fiber Laser with 80 Khz Repetition Rate and 4.5 Ns Duration

1.2 GHz Repetition Rate Stretched-pulse from a Femtosecond Solid-state Yb: Fiber Laser

High Repetition Rate All-Normal Dispersion Yb:fiber Laser for Minimum Pulses