1 GHz Repetition Rate Ring Cavity Femtosecond Yb:fiber Laser

Chen Li,Xiang Gao,Guizhong Wang,Tongxiao Jiang,Aimin Wang,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo_si.2014.sw3e.2

2014-01-01

Abstract:We demonstrate the first 1 GHz fundamental repetition rate ring cavity ytterbium doped fiber laser. The laser delivers 600 mW, 64fs near transform-limited pulses and supports direct octave-spanning spectrum generation.

What problem does this paper attempt to address?

330 Mhz Repetition Rate Femtosecond Yb:Fiber Ring Laser

Peng Li,Aimin Wang,Xi Wang,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo_si.2011.cms4

2011-01-01

Abstract:We demonstrate 330 MHz repetition rate operation in a ring cavity Yb:fiber laser with novel and compact devices. The spectral bandwidth of the pulse is 30 nm and the dechirped pulse width is 48 fs. (C) 2010 Optical Society of America
750 MHz Fundamental Repetition Rate Femtosecond Yb:fiber Ring Laser.

Chen Li,Guizhong Wang,Tongxiao Jiang,Aimin Wang,Zhigang Zhang

DOI: https://doi.org/10.1364/ol.38.000314

2013-01-01

Abstract:We report a compact Yb:fiber ring laser operated at 750 MHz. The average output power is 210 mW at a pump power of 1.8 W. The dechirped pulse width is 68 fs.
503Mhz Repetition Rate Femtosecond Yb: Fiber Ring Laser with an Integrated WDM Collimator.

Aimin Wang,Hongyu Yang,Zhigang Zhang

DOI: https://doi.org/10.1364/oe.19.025412

IF: 3.8

2011-01-01

Optics Express

Abstract:We demonstrate 503MHz fundamental high repetition rate operation in a ring cavity passively mode-locked Yb:fiber laser incorporating a novel wavelength-division-multiplexing collimator and a piece of all-solid photonic bandgap fiber. The Yb doped fiber was directly fabricated as one fiber pigtail into the functional collimator, greatly shortening the cavity length and facilitating the splicing operation. A 5cm long photonic bandgap fiber with abnormal dispersion at the lasing wavelength (centered at 1030nm) decreases the net dispersion for shorter output pulses. The spectral bandwidth of the pulse was 34nm. The direct output pulse was measured to be 156fs and the dechirped pulse was about 76fs. With this innovative Yb:fiber pigtailed WDM collimator, the ring cavity laser has the potential to work at a repetition rate up to GHz.
Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Xiang Zhang,Yi Wang,Bin Liu,Chunhua Wang,Zhen Xiang,Chong Liu

DOI: https://doi.org/10.1364/ao.53.005058

IF: 1.9

2014-01-01

Applied Optics

Abstract:A pulsed laser for laser guide stars with a 100 MHz repetition rate and 1 ns pulse width was achieved by external modulation of a continuous wave (CW) laser with a 70 kHz spectrum width. The laser is amplified first by two fiber pre-amplifiers and then by four solid-state power amplifiers. The laser achieves gains as high as 36 dB in the fiber pre-amplifiers due to the long gain medium length. The output power from the fiber amplifiers is 2.1 W. The laser receives further amplification in the solid-state amplifiers and retains good beam quality by aberration compensation. The final output average power is 102.9 W, and the beam quality factor M-2 is 1.46. The laser reaches high power without spectrum width and pulse width broadening at the 100 MHz repetition rate. The spectrum width of the pulsed laser is less than 0.8 GHz, which is close to the Fourier transform limit. Such a laser with single-frequency, high-repetition, and high-power features along with good beam quality will be valuable for many research areas. (C) 2014 Optical Society of America
330Mhz, Sub 50fs Yb: Fiber Ring Laser

Peng Li,Aimin Wang,Xi Wang,Zhigang Zhang

DOI: https://doi.org/10.1016/j.optcom.2012.01.035

IF: 2.4

2012-01-01

Optics Communications

Abstract:We demonstrate 330MHz repetition rate operation in a ring cavity Yb:fiber laser with an innovative wavelength-division-multiplexing collimator to raise the repetition rate. The spectral bandwidth of the pulse is 30nm and the dechirped pulse width is 48fs. The output power is 70mW with 600mW, 975nm pump laser diode.
66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

minglie hu,lu chai,weidong shen,xu liu,chingyue wang,han chi,bowen liu,youjian song

DOI: https://doi.org/10.1364/fbta.2014.fth4f.3

2014-01-01

Abstract:We present a mode-locked all-normal-dispersion double-clad Yb-doped fiber laser with 3 W output average power at 81 MHz repetition rate for 37 nJ chirped pulses, which can be compressed to 66 fs, with 400 KW peak power.
Ytterbium-Doped Mode-Locked Fiber Laser at Hundreds of Khz Repetition Rate

Chun Zhou,Lingling Chen,Yue Cai,Meng Zhang,Ling Ren,Peng Li,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo.2009.jtud67

2009-01-01

Abstract:A long ring-cavity, low repetition rate Yb-doped fiber laser was demonstrated. Pulses with repetition rate of about 381.3 kHz and single pulse energy above 300 nJ were obtained.
GHz fundamental repetition rate femtosecond Er:fiber laser mode locked by nonlinear polarization evolution

Chen Zhendong,Ruoao Yang,Yanpeng Tang,Duo Pan,Jingpeng Cao,ya wang,Meng Zhang,jianjun wu,Zhigang Zhang,Jingbiao Chen

DOI: https://doi.org/10.1364/opticaopen.25853566

2024-01-01

Abstract:We demonstrate the first 1 GHz femtosecond erbium-doped fiber ring laser mode locked by nonlinear polarization evolution (NPE). The laser delivers a maximum average output power of 228 mW, correspondingly to single pulse energy of 0.228 nJ. The pulse spectral bandwidth is 32 nm, and the direct output pulse duration is 81.8 fs without extra-cavity compression. The integrated relative intensity noise (RIN) and the residual root mean square phase noise are measured to be 0.059% and 35 mrad (ranging from 10 Hz to 1 MHz), respectively. The result indicates that the high repetition rate lasers can operate without a significant increase in noise. This laser is an ideal source as a compact and relatively high pulse energy and short pulse at this repetition rate and shows great potential for optical frequency combs and other applications around 1560 nm wavelength.
1 GHz Repetition Rate Femtosecond Yb:fiber Laser for Direct Generation of Carrier-Envelope Offset Frequency.

Chen Li,Yuxuan Ma,Xiang Gao,Fuzeng Niu,Tongxiao Jiang,Aimin Wang,Zhigang Zhang

DOI: https://doi.org/10.1364/ao.54.008350

IF: 1.9

2015-01-01

Applied Optics

Abstract:We report a mode-locked fiber laser working at a 1 GHz fundamental repetition rate. The laser delivers a 600 mW average power at a pump power of 1800 mW. The pulse spectrum bandwidth was 23 nm to support 64 fs near-transform-limited pulses. An octave-spanning supercontinuum from 590 to 1350 nm was generated in a tapered photonic crystal fiber solely with the mode-locked fiber-laser output, without amplifiers. A 30 dB f(ceo) beat signal was detected via f-to-2f interferometer.
Octave-Spanning Spectrum Generation With A 503mhz Repetition Rate Femtosecond Yb:Fiber Ring Laser

Aimin Wang,Hongyu Yang,Chen Li,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo_si.2012.ctu3g.2

2012-01-01

Abstract:We demonstrate octave-spanning spectrum generation in tapered silica and tellurite photonic crystal fibers pumped by a compact 503 MHz repetition rate mode-locked Yb:fiber ring oscillator and amplifier system. (C) 2012 Optical Society of America
616 MHz Repetition Rate Sub-100Fs Amplifier-Similariton Yb:Fiber Laser

Chen Li,Guizhong Wang,Tongxiao Jiang,Peng Li,Aimin Wang,Zhigang Zhang

2014-01-01

Abstract:We report a compact Yb:fiber ring laser operated at 616 MHz. The average output power is 450 mW at a pump power of 900 mW. The dechirped pulse width is 98 fs.
Femtosecond Amplifier Similariton Yb:fiber Laser at a 616 MHz Repetition Rate.

Chen Li,Guizhong Wang,Tongxiao Jiang,Peng Li,Aimin Wang,Zhigang Zhang

DOI: https://doi.org/10.1364/ol.39.001831

IF: 3.6

2014-01-01

Optics Letters

Abstract:We report a compact Yb:fiber ring laser operated at 616 MHz. The average output power is 450 mW at a pump power of 900 mW. The dechirped pulse width is 98 fs.
Octave-spanning Spectrum of Femtosecond Yb:fiber Ring Laser at 528 MHz Repetition Rate in Microstructured Tellurite Fiber.

Guizhong Wang,Tongxiao Jiang,Chen Li,Hongyu Yang,Aimin Wang,Zhigang Zhang

DOI: https://doi.org/10.1364/oe.21.004703

IF: 3.8

2013-01-01

Optics Express

Abstract:The octave-spanning spectrum was generated in a tellurite glass based microstructured fiber pumped by a 528 MHz repetition rate Yb:fiber ring laser without amplification. The laser achieved 40% output optical-to-optical efficiency with the output power of 410 mW. By adjusting the grating pair in the cavity, this oscillator can work at different cavity dispersion regimes with the shortest dechirped pulse width of 46 fs. The output pulses were then launched into a high-nonlinearity tellurite fiber, which has the zero-dispersion wavelength at ~1 μm. The high nonlinearity coefficient (1348 km⁻¹W⁻¹) and the matched zero-dispersion wavelength with pump laser enable the octave-spanning supercontinuum generated from 750 nm to 1700 nm with the coupled pulse energy above 10 pJ.
439 MHz, 94 fs, low-threshold mode-locked all fiber ring laser

Xiwei Huang,Xiaoxiao Guo,Xiaohui Li,Xu Tang,Rui Zhang,Yan Zhang,Yishan Wang,Wei Zhao

DOI: https://doi.org/10.1016/j.optlastec.2024.111336

IF: 4.939

2024-06-21

Optics & Laser Technology

Abstract:Pulsed fiber lasers with high repetition rates play a crucial role in applications such as high-efficiency processing and bio-optical imaging. However, many ring fiber mode-locked lasers primarily focus on shortening the cavity length to achieve high repetition rate pulse output. Attention is often directed towards the gain fiber and cavity structure, with less consideration given to the challenge of increasing mode-locking threshold power. In this study, we present a high-repetition-rate annular all-fiber laser system with dispersion management. Through strategic adjustment of the intracavity dispersion away from the near-zero dispersion region and careful control of the intracavity gain strength, we have successfully lowered the mode-locking threshold power. This approach can generate pulses with a repetition rate of 439.71 MHz and a mode-locking threshold power of approximately 600 mW. Following pulse compression, the achieved pulse width is 94.8 fs. Its time-bandwidth product is 0.368. To our knowledge, this represents the highest fundamental repetition rate currently attained using a ring all-fiber resonator, accompanied by the lowest mode-locking threshold. Our work introduces a ring fiber laser system characterized by a low mode-locking threshold and a high repetition rate, offering a valuable method for achieving higher fundamental repetition rate pulses.

optics,physics, applied
Sub-50fs Pulse Generation Directly from a 750 MHz Repetition Rate Dispersion Managed Yb:fiber Ring Laser

Chen Li,Guizhong Wang,Tongxiao Jiang,Aimin Wang,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo_si.2013.ctu3j.8

2013-01-01

Abstract:We demonstrate sub-50 fs pulses generation directly from a 750 MHz repetition rate dispersion managed Yb: fiber ring laser by precision compensation of the intracavity dispersion.
97-Watt, 1.08-Gigahertz Repetition Rate, Femtosecond Yb:fiber Laser Source

Yan Wang,Yizhou Liu,Zhigang Zhang,Franz X. Kartner

DOI: https://doi.org/10.1364/cleopr.2020.c2a_2

2020-01-01

Abstract:We demonstrate a femtosecond ytterbium-doped fiber laser at 1030 nm with 1.08 GHz repetition rate, 97 W average output power using chirped pulse amplification (CPA). The compressed output pulse width is 233 fs.
GHz Fundamental Mode-Locking of a Highly Integrated Er-doped All-Fiber Ring Laser

Maolin Dai,Bowen Liu,Yifan Ma,Ruoao Yang,Zhigang Zhang,Sze Yun Set,Shinji Yamashita

2024-01-01

Abstract:High repetition rate ultrafast fiber lasers are important tools for both fundamental science and industry applications. However, achieving over GHz repetition rate in passively mode-locked fiber ring lasers is still challenging. Here, we demonstrate a novel all-integrated Er-doped fiber ring laser that achieves over GHz fundamental repetition rate, passively mode-locked by carbon nanotubes (CNTs). To the best of our knowledge, this is the first passively mode-locked GHz all-fiber laser with ring cavity configuration. In the proposed laser oscillator, all functions are integrated into one device, making it an ultra-compact laser cavity. The laser produces ultrafast optical pulses at 1562 nm, with a pulse width of 682 fs and a fundamental repetition rate of 1.028 GHz. The stable mode-locking is characterized by high signal-to-noise ratio (SNR) radiofrequency signal and low relative intensity noise (RIN).
A 303 MHz Fundamental Repetition Rate Femtosecond Er:fiber Ring Laser

Liu Huan,Gong Ma-Li,Cao Shi-Ying,Lin Bai-Ke,Fang Zhan-Jun

DOI: https://doi.org/10.7498/aps.64.114210

2015-01-01

Abstract:High-repetition-rate fiber laser has widely applications in the field of femtosecond frequency comb, ultra-fast optical sampling, and so on. In this paper, an Er-doped femtosecond fiber laser with a repetition rate of 303 MHz is demonstrated based on the mechanism of nonlinear polarization rotation. By means of optimization of cavity dispersion, the net dispersion in fiber cavity is a little negative nearby zero point. After mode locking, the laser is operating in the stretched-pulse regime. At a pump power of 817 mW, the output power of the laser is 125 mW in continue-wave state, and 69 mW in mode-locking state. The laser directly generates 90 fs before dispersion compensation. Mode locking can self-start at the pump power of 700-817 mW. Repetition rate drift of the mode-locked laser is 30 Hz in five hours.
1.2 GHz Repetition Rate Stretched-pulse from a Femtosecond Solid-state Yb: Fiber Laser

Ya Wang,Ruoao Yang,Zhendong Chen,Duo Pan,Bin Luo,Zhigang Zhang,Jingbiao Chen

DOI: https://doi.org/10.1364/fio.2023.fd2.5

2023-01-01

Abstract:A 1.2 GHz, 106 fs stretched-pulse mode-locked laser was demonstrated, with > 700 mW output power. To the best of our knowledge, this is the highest repetition rate from NPE mode locked Yb: fiber lasers.
464 MHz repetition rate erbium doped soliton fiber laser

jian zhang,fuzeng niu,xing chen,xiang gao,yizhou liu,aimin wang,zhigang zhang

DOI: https://doi.org/10.1364/cleo_si.2014.sw3e.1

2014-01-01

Abstract:We demonstrate an Er:fiber ring laser operated at the fundamental repetition rate of 464MHz. The output power is 115mW under the pump power of 1.65W. The pulse width is 123fs.

1 GHz Repetition Rate Ring Cavity Femtosecond Yb:fiber Laser

330 Mhz Repetition Rate Femtosecond Yb:Fiber Ring Laser

750 MHz Fundamental Repetition Rate Femtosecond Yb:fiber Ring Laser.

503Mhz Repetition Rate Femtosecond Yb: Fiber Ring Laser with an Integrated WDM Collimator.

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

330Mhz, Sub 50fs Yb: Fiber Ring Laser

66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

Ytterbium-Doped Mode-Locked Fiber Laser at Hundreds of Khz Repetition Rate

GHz fundamental repetition rate femtosecond Er:fiber laser mode locked by nonlinear polarization evolution

1 GHz Repetition Rate Femtosecond Yb:fiber Laser for Direct Generation of Carrier-Envelope Offset Frequency.

Octave-Spanning Spectrum Generation With A 503mhz Repetition Rate Femtosecond Yb:Fiber Ring Laser

616 MHz Repetition Rate Sub-100Fs Amplifier-Similariton Yb:Fiber Laser

Femtosecond Amplifier Similariton Yb:fiber Laser at a 616 MHz Repetition Rate.

Octave-spanning Spectrum of Femtosecond Yb:fiber Ring Laser at 528 MHz Repetition Rate in Microstructured Tellurite Fiber.

439 MHz, 94 fs, low-threshold mode-locked all fiber ring laser

Sub-50fs Pulse Generation Directly from a 750 MHz Repetition Rate Dispersion Managed Yb:fiber Ring Laser

97-Watt, 1.08-Gigahertz Repetition Rate, Femtosecond Yb:fiber Laser Source

GHz Fundamental Mode-Locking of a Highly Integrated Er-doped All-Fiber Ring Laser

A 303 MHz Fundamental Repetition Rate Femtosecond Er:fiber Ring Laser

1.2 GHz Repetition Rate Stretched-pulse from a Femtosecond Solid-state Yb: Fiber Laser

464 MHz repetition rate erbium doped soliton fiber laser