Abstract:The development of high-performance integrated circuit chips and the shrinkage of feature sizes according to Moore’s law bring forward continuously the requirements for low dielectric constant (low-k) materials with various excellent properties in the back-end-of-the-line (BEOL) interconnect. Porous SiCOH films prepared by plasma enhanced chemical vapor deposition (PECVD) through a porogen approach are widely applied to industry and extensively studied. Thermal annealing is an important process for fabricating the porous low-k films, which has a great influence on film structure as well as properties. SiCOH films are deposited by PECVD using tetraethoxysilane and limonene as precursors, and annealed at 450 ℃ for 1.5 h under nitrogen atmosphere. The evolutions of film structure and properties during thermal annealing are revealed, and the reaction mechanism for structure change is also proposed. Fourier transform inferred spectroscopy and solid state nuclear magnetic resonance results show that the as-deposited film is an organic-inorganic hybrid film composed of various kinds of Si-O-Si, -CHx, Si-O-CH2CH3, etc. The organic component is removed almost completely during thermal annealing, making a porous film with a Si-O-Si inorganic skeleton. The skeleton is also rearranged at the same time. Deconvolution of the Si-O-Si absorption band of the FTIR spectrum reveals that the cage-like Si-O-Si occupies the major part for both as-deposited and annealed films, while the amount of silicon suboxide Si-O-Si decreases and that of network Si-O-Si increases during thermal annealing, making the film more robust. More C=C and Si-C are formed through chemical reactions between Si-H, -CHx and Si-O-CH2-CH3, and crosslinking is further enhanced. Nitrogen adsorption/desorption isothermal measurement reveals that a large number of micropores with diameter less than 2-3 nm are created during thermal annealing, which is consistent with the removal of organic groups and the existence of cage-like Si-O-Si. As a result, both the refractive index and dielectric constant decrease significantly from 1.476 (λ =630 nm) and 3.45 to 1.365 and 2.60, respectively. Because of the increase of C=C after annealing, extinction coefficient and leakage current density increase. Although there is a shrinkage of 14.7% in film thickness and a reduction of mechanical properties after annealing, the Young’s modulus is still larger than 4 GPa. Considering all kinds of properties, the obtained film appears to be a competitive candidate as inter layer dielectrics in the BEOL interconnect of integrated circuits.

Low dielectric constant films deposited by PECVD using tetraethoxysilane and limonene as precursors

Preparation Of Low-K Nanoporous Sio2 Films By Plasma-Enhanced Chemical Vapor Deposition

Plasma enhanced chemical vapor deposition ultralow dielectric constant films using triethoxymethylsilane and limonene as precursors

Characterization of PECVD ultralow dielectric constant porous SiOCH films using triethoxymethylsilane precursor and cinene porogen

Pure Silica Zeolite Films as Low-k Dielectrics by Spin-On of Nanoparticle Suspensions

Preparation and Characterization of Ultralow-Dielectric-Constant Porous SiCOH Thin Films Using 1,2-Bis(triethoxysilyl)ethane, Triethoxymethylsilane, and a Copolymer Template

Characterization of ultra-low k porous organosilica thin films

Characterization of low-dielectric-constant SiCON films grown by PECVD under different RF power

Preparation of Ultra Low-κ Porous SiOCH Films from Ring-Type Siloxane with Unsaturated Hydrocarbon Side Chains by Spin-On Deposition

20-P-11 Pure-silica Zeolite Low-K Dielectric Thin Films by Spin-on Process

Low-dielectric-constant Α-Sicof Film for ULSI Interconnection Prepared by PECVD with TEOS/C4F8/O2

An amorphous SiCOF film with low dielectric constant prepared by plasma-enhanced chemical vapor deposition

Preparation and characterization of low-dielectric-constant F-doped SiOCN films by PECVD

Effect of Thermal Annealing on the Structure and Properties of Plasma Enhanced Chemical Vapor Deposited Sicoh Film

Thermal Stability of Ultralow k Carbon-Bridged Periodic Mesoporous Organosilica Film

Mechanical Properties of Low K SiO2 Thin Films Templated by PVA

High Density Polyethylene-Grafted-maleic Anhydride Low-K Porous Films Prepared Via Thermally Induced Phase Separation

Pulsed Laser Deposition of Zirconium Silicate Thin Films As Candidate Gate Dielectrics

Preparation and structure of porous dielectrics by plasma enhanced chemical vapor deposition

Superhydrophobic ZIF-8/PEN films with ultralow dielectric constant and outstanding mechanical properties

Solution-processed Transparent PVP:HfO2 Hybrid Dielectric Films with Low Leakage Current Density and High K