Abstract:Silicon dioxide has recently received considerable attention as an interlayer dielectric for use in multichip modules (MCMs) because of its excellent properties. A high deposition rate at relatively low temperatures is desirable for process compatibility and high throughput. PECVD silicon dioxide films up to 7 μm thick were deposited at 1000 Å/min in a showerhead type system using SiH4 , N2O , and N2 . Substrate temperature was varied from 250–350°C. The deposited films were annealed at various temperatures (up to 500°C). Uniformity, etch rate, film stress, refractive index, Si 2p and O 1s binding energies, and Si‐H and OH bonding configurations were studied. C‐V and I‐V characterizations of the films were performed to investigate their electrical quality. All the as‐deposited films exhibited moderate compressive stress. A considerable change in stress was observed after annealing the films in the above noted temperature range. OH content in the films was found to decrease and the hydrogen content in the films was found to increase with increasing deposition temperature. A good correlation between silanol (Si‐OH) and hydrogen content and silicon richness of the films with film stress was observed. The refractive index was found to decrease with increasing anneal temperature for all the films. Etching rates were lower for films deposited at higher temperatures. All films exhibited excellent breakdown characteristics.

Low-dielectric-constant Α-Sicof Film for ULSI Interconnection Prepared by PECVD with TEOS/C4F8/O2

An amorphous SiCOF film with low dielectric constant prepared by plasma-enhanced chemical vapor deposition

Deposition of Dense SiO2 Thin Films for Electrical Insulation Applications by Microwave ECR Plasma Source Enhanced RF Reactive Magnetron Sputtering

Structure characterization of carbon and fluorine-doped silicon oxide films with low dielectric constant

Synthesis and characterization of SiCOF/a-C:F double-layer films with low dielectric constant for copper interconnects

Plasma enhanced chemical vapor deposition ultralow dielectric constant films using triethoxymethylsilane and limonene as precursors

Low dielectric constant films deposited by PECVD using tetraethoxysilane and limonene as precursors

Porous Amorphous Fluoropolymer Films with Ultralow Dielectric Constant

Preparation and Characterization of Ultralow-Dielectric-Constant Porous SiCOH Thin Films Using 1,2-Bis(triethoxysilyl)ethane, Triethoxymethylsilane, and a Copolymer Template

Characterization of PECVD ultralow dielectric constant porous SiOCH films using triethoxymethylsilane precursor and cinene porogen

Effect of O2-doping on Bonding Configuration and Electric Properties of SiCOH Films Prepared by Decamethylcyclopentasiloxane Electron Cyclotron Resonance Plasma

Atomistic Simulation of plasma enhanced chemical vapor deposited SiCOH dielectrics

Copper Metallization of Low-Dielectric-constant A-Sicof Films for ULSI Interconnects

Ultrathin Cusin/P-Sic:H Bilayer Capping Barrier for Cu/Ultralow-K Dielectric Integration

Preparation and structure of porous dielectrics by plasma enhanced chemical vapor deposition

FTIR Analyses of SiOF Thin Film with Low Dielectric Constant

Improved electrical characteristics of 4H-SiC (0001) MOS devices with atomic layer deposited SiO2 gate dielectric with H2O plasma

Low reflective index, highly transparent, and ultra-low dielectric constant materials prepared via effective copolymerization of 4-methyl-1-pentene and a Si-containing α,ω-diolefin

Stress Control and Anti-erosion Characteristics of PECVD SiC Thin Film

Characterization of High Rate Deposited PECVD Silicon Dioxide Films for MCM Applications

Interfacial Structure and Electrical Properties of LaAlO 3 Gate Dielectric Films on Si by Metalorganic Chemical Vapor Deposition