Abstract:The development of high-performance integrated circuit chips and the shrinkage of feature sizes according to Moore’s law bring forward continuously the requirements for low dielectric constant (low-k) materials with various excellent properties in the back-end-of-the-line (BEOL) interconnect. Porous SiCOH films prepared by plasma enhanced chemical vapor deposition (PECVD) through a porogen approach are widely applied to industry and extensively studied. Thermal annealing is an important process for fabricating the porous low-k films, which has a great influence on film structure as well as properties. SiCOH films are deposited by PECVD using tetraethoxysilane and limonene as precursors, and annealed at 450 ℃ for 1.5 h under nitrogen atmosphere. The evolutions of film structure and properties during thermal annealing are revealed, and the reaction mechanism for structure change is also proposed. Fourier transform inferred spectroscopy and solid state nuclear magnetic resonance results show that the as-deposited film is an organic-inorganic hybrid film composed of various kinds of Si-O-Si, -CHx, Si-O-CH2CH3, etc. The organic component is removed almost completely during thermal annealing, making a porous film with a Si-O-Si inorganic skeleton. The skeleton is also rearranged at the same time. Deconvolution of the Si-O-Si absorption band of the FTIR spectrum reveals that the cage-like Si-O-Si occupies the major part for both as-deposited and annealed films, while the amount of silicon suboxide Si-O-Si decreases and that of network Si-O-Si increases during thermal annealing, making the film more robust. More C=C and Si-C are formed through chemical reactions between Si-H, -CHx and Si-O-CH2-CH3, and crosslinking is further enhanced. Nitrogen adsorption/desorption isothermal measurement reveals that a large number of micropores with diameter less than 2-3 nm are created during thermal annealing, which is consistent with the removal of organic groups and the existence of cage-like Si-O-Si. As a result, both the refractive index and dielectric constant decrease significantly from 1.476 (λ =630 nm) and 3.45 to 1.365 and 2.60, respectively. Because of the increase of C=C after annealing, extinction coefficient and leakage current density increase. Although there is a shrinkage of 14.7% in film thickness and a reduction of mechanical properties after annealing, the Young’s modulus is still larger than 4 GPa. Considering all kinds of properties, the obtained film appears to be a competitive candidate as inter layer dielectrics in the BEOL interconnect of integrated circuits.

Characterization of High Rate Deposited PECVD Silicon Dioxide Films for MCM Applications

Preparation Of Low-K Nanoporous Sio2 Films By Plasma-Enhanced Chemical Vapor Deposition

Deposition of Dense SiO2 Thin Films for Electrical Insulation Applications by Microwave ECR Plasma Source Enhanced RF Reactive Magnetron Sputtering

Silicon Dioxide Deposition by Atmospheric Pressure and Low‐Temperature CVD Using TEOS and Ozone

Cold Deposition of Large-Area Amorphous Hydrogenated Silicon Films by Dielectric Barrier Discharge Chemical Vapor Deposition

SiO2 films deposited on silicon at low temperature by plasma-enhanced decomposition of hexamethyldisilazane: Defect characterization

Non-equilibrium,Atmospheric-pressure Plasma Jet for Depositing Silicon Oxide Films

Study of SiO2 Thin Film Deposition by PECVD

Effects Of Deposition Pressure On Properties Of Carbon-Doped Silicon Oxide Low Dielectric Constant Films

Processing and Characterisation of PECVD Silicon Nitride Films

Uniform broad-area deposition and patterning of SiO2 nanofilms by 172 nm photochemical conversion of liquid tetraethoxysilane layers at 300 K

Effect of Thermal Annealing on the Structure and Properties of Plasma Enhanced Chemical Vapor Deposited Sicoh Film

Effects of Substrate Temperature on the Properties of Silicon Oxide Films by PECVD

Low-Temperature Deposition of High-Quality SiO2 Films with a Sloped Sidewall Profile for Vertical Step Coverage

Influence of Substrate Temperature on the Morphology, Composition and Growth Rate of SiC Films Deposited by PECVD

Characterization of PECVD ultralow dielectric constant porous SiOCH films using triethoxymethylsilane precursor and cinene porogen

Characteristic Study of Silicon Nitride Films Deposited by LPCVD and PECVD

Study on PECVD process and characteristics of SiCxNy:H film

Stress Control and Anti-erosion Characteristics of PECVD SiC Thin Film

Properties of silicon dioxide films deposited at low temperatures by microwave plasma enhanced decomposition of tetraethylorthosilicate

Characteristics of SiC_x: H and SiN_x Cy:H Thin Films Deposited by PECVD