Abstract:During electrostatic bonding, also known as anodic bonding, silicon is bonded to glass by applying an external voltage and simultaneous heating to temperatures of 200...450 $\deg$C. While cooling to working temperature after bonding happened pieces are mutually deformed. Due to linear thermal expansion coefficients mismatch of anodically bonded glass and silicon samples an internal stress state is generated. Such stresses are called thermal mismatch stresses. The aim of this paper is a determination of technological and design solutions to achieve minimal thermal mismatch stresses in resulting bond. The nonlinear dependence of linear thermal expansion coefficients of bonded samples' materials on temperature makes it difficult to minimize thermal mismatch stresses by chosing materials with close average thermal expansion coefficients in particular temperature range. To assess means of lowering thermal mismatch stress in this paper two different ways to describe assembly are used: two thin bonded layers and multilayered composite material. Based on properties of two brands of glass (LK5, Borofloat 33) and silicon used with described mathematical models thermal mismatch stresses at temperature $T_w$ in samples bonded at several different temperatures $T_b$ are evaluated. Bonded silicon surface stress dependence of glass to silicon wafer thickness ratio is evaluated. Based on such evaluations one can say that by varying thickness of glass bonded to silicon one can obtain zero thermal mismatch stress at a particular depth of material or obtain stress of some defined value at this depth. Models of assembly description used in this paper can be used to optimize anodic bonding process parameters. Such usage aimed to minimize thermal mismatch stresses at device working temperatures is presented in this paper.

Reliability of Au-Si Eutectic Bonding

Au-Si Eutectic Wafer Bonding Mechanism Analysis and a Intensity Model

Research on Silicon-Glass Direct Bonding at Room Temperature

Evaluation of Au/a-Si eutectic wafer level bonding process

AN INTENSITY TESTING MODEL AND EXAMINATION OF GOLD–SILICON WAFER BONDING

Research on Silicon-Glass Thermal Bonding with SiO2 Film Assist

Investigation of Au/Si Eutectic Wafer Bonding for MEMS Accelerometers

Low Temperature Au-In-Au Metallic Bonding and Its Application in the Fabrication of Vcsels

Investigation of the Reliability of the Interconnection between Metal Electrode and Silicon Anchor in Silicon-on-Glass Process

Wafer Lever Packaging for Gyroscope by Au/Si Eutectic Bonding

The effect of finish layer on the interfacial cracking failure of Au Si bonding

Au-Si Eutectic Bonding Technology for MEMS Device

Bonding Silicon Wafers with Reactive Multilayer Foils

Room temperature bonding of diamond/Si with Mo/Au interlayers in atmospheric air

Silicon/glass wafer-to-wafer bonding with Ti/Ni intermediate bonding

Mechanical Stresses Estimation in Silicon and Glass Bonded at Elevated Temperature

Interfacial Bonding Mechanism and Joint Weakness Area of Brazed SiC and Nb with AuNi Filler Alloy: First‐principles and Experimental Perspective

Discussion and Analysis of Au/a-Si Contact Resistance in MEMS/NEMS Devices.

Study on the mechanism of glass-SiC-glass anodic bonding process

Bonding mechanisms and electrical properties of Ge/Si and Si/Si bonded wafers achieved by thin microcrystalline Ge interlayer

Microstructural Characterization and Mechanical Performance of Wafer-Level SLID Bonded Au-Sn and Cu-Sn Seal Rings for MEMS Encapsulation