Abstract:As 3D stacking of memory products leads the trend, dimension of micro-bump scales down. General micro-bump pitch has been reduced to 20 similar to 40 mu m, which is almost one order of magnitude smaller than flip chip solder ball. Current density flowing through the micro-bump will increase dramatically under the same supply current when chips are stacked together. It can be seen that electromigration failure of micro-bump will become a severe issue. Investigation of electromigration reliability for fine pitch micro-bump is urgently needed. However, due to the extremely narrow gap between micro-bumps, reliability study through experimental methods is usually resource-consuming. Therefore, numerical simulation method is particularly important to study electromigration reliability. In this paper, a 3D stacked test vehicle model with Cu-Sn micro-bump as interlayer connection is established. Atomic Flux Divergence (AFD) method is used to investigate the dominate migration principle in Cu-Sn micronstructure under different working conditions. Results reveal the behavior of electronic migration, thermal migration, and stress migration under different electromigration test conditions. Stress migration is observed larger than electronic migration and thermal migration when current density=1x10(9)A/m(2), temperature=150 degrees C, which is in accordance with the experiment under the same condition. Besides, stress migration is observed always having great influence on electromigration process with different current density when test temperature is high (150 degrees C). Low test temperature is suggested if the effect of electronic migration needs to be manifested in final experiment result.

Electromigration prediction and test for 0.18μm power technology in wafer level reliability

A new prediction methodology for electromigration-induced solder degradation in a WL-CSP system

Computational Analysis of Mechanical and Electromigration Reliability Problems

Comparison of the Time-Dependent Physical Processes in the Electromigration of Deep Submicron Copper and Aluminum Interconnects

Transient Electrothermal Analysis of Multilevel Interconnects in the Presence of ESD Pulses Using the Nonlinear Time-Domain Finite-Element Method

Electro-Thermo-Mechanical Investigation On Multi-Level Interconnects In The Presence Of An Esd Pulse

A Physics-Based Electromigration Reliability Model for Interconnects Lifetime Prediction

Hybrid Physical Field Simulation: Transient Electro-Thermo-Mechanical Responses Of Interwafer Interconnects Under The Impact Of An Emp

The Study of the Reliability of Complex Components during the Electromigration Process

Numerical simulation of electromigration failure in IC interconnect structures

Physics-based Electromigration Modeling and Assessment for Multi-Segment Interconnects in Power Grid Networks.

Reliability Study of Fine Pitch Cu-Sn Micro-Bump Structure Electromigration Test by Finite Element Simulation

Reliability Studies of Barrier Layers for Cu/PAE Low-K Interconnects.

Dependence of electromigration caused by different mechanisms on current densities in VLSI interconnects

A Comprehensive study of reliability improvement for 65nm Cu/Low-k process

Theoretical Understanding of Electromigration-Related Surface Diffusion and Current-Induced Force in Ag–Pd Systems

Understanding the Impact of Surface Engineering, Structure, and Design on Electromigration Through Monte Carlo Simulation and In‐Situ SEM Studies

Electromigration behavior of 60 nm dual damascene Cu interconnects

Self-heating Aware EM Reliability Prediction of Advanced CMOS Technology by Kinetic Monte Carlo Method

Reservoir Effect and the Role of Low Current Density Regions on Electromigration Lifetimes in Copper Interconnects

An Electro-Thermo-mechanical Coupling Phase-Field Model of Defect Evolution Induced by Electromigration in Interconnects