Abstract:This paper presents a hybrid modelling approach that combines physics-based electromigration modelling (PEM) and statistical methods to evaluate the electromigration (EM) limits of nano-interconnects in mesh networks. The approach, which is also compatible with standard Place and Route (P&R) tools and practises, takes into account the positive impact of network redundancy on EM current limits. The numerical simulations conducted in this study show that conventional methods underestimate the EM current limits of a power delivery network (PDN) unit-cell by 80% due to their lack of consideration for redundancy. Additionally, the time-to-failure (TTF) distributions of a PDN unit-cell obtained by the developed modelling framework adhered to a lognormal distribution, where the lognormal sigma, σlogn, exhibits a 55% reduction compared to that of the single constituent interconnects. The study also found the negative voltage (i.e., ground or Vss) grid to be more susceptible to EM than the positive voltage, i.e., Vdd grid. In the examined grid unit-cell design, both the number of interconnect sites prone to voiding and also the magnitude of the peak tensile stress within the nano-interconnects were found to be two times as high in the Vss case compared to Vdd. The lognormal sigma of TFF for the grid unit-cells, σlogn-tile, show a marked reduction compared to the lognormal sigma of the constituent single interconnects, σlogn, with a 50% and 66% decrease compared to single interconnects, for downstream (Vss) and upstream (Vdd), respectively. In addition, σlogn-tile was three times higher for downstream (Vss) compared to upstream (Vdd), whilst, in contrast, this difference was only 2-fold at the single interconnect level. TTF50% was predicted to be 4.13-fold higher at the grid unit-cell level for the upstream compared to downstream operation, which was also more pronounced than in the single interconnect level where the difference was only 2-fold. This research provides valuable insights into the EM ageing of nano-interconnects in mesh networks and could pragmatically enhance the accuracy of EM compliance evaluation methods.

Dependence of electromigration caused by different mechanisms on current densities in VLSI interconnects

Comparison of the Time-Dependent Physical Processes in the Electromigration of Deep Submicron Copper and Aluminum Interconnects

Computational Analysis of Mechanical and Electromigration Reliability Problems

Reservoir Effect and the Role of Low Current Density Regions on Electromigration Lifetimes in Copper Interconnects

A new prediction methodology for electromigration-induced solder degradation in a WL-CSP system

Grain boundaries-dominated migration failure of copper interconnect under multiphysics field: Insight from theoretical modeling and finite element analysis

Physics-based Electromigration Modeling and Assessment for Multi-Segment Interconnects in Power Grid Networks.

The effect of stress migration on electromigration in dual damascene copper interconnects

The Study of the Reliability of Complex Components during the Electromigration Process

An Electro-Thermal Analysis of Lateral Double-diffused MOSFET(LDMOS) Using FEM

A Physics-Based Electromigration Reliability Model for Interconnects Lifetime Prediction

Numerical simulation of electromigration failure in IC interconnect structures

An Electro-Thermo-mechanical Coupling Phase-Field Model of Defect Evolution Induced by Electromigration in Interconnects

Electromigration reliability issues in dual-damascene Cu interconnections

Atomic-Scale Investigation of Electromigration with Different Directions of Electron Flow into High-Density Nanotwinned Copper through In Situ HRTEM

A Linear-Time Algorithm for Steady-State Analysis of Electromigration in General Interconnects

Electromigration in Nano-Interconnects: Determining Reliability Margins in Redundant Mesh Networks Using a Scalable Physical-Statistical Hybrid Paradigm

Electromigration behavior of 60 nm dual damascene Cu interconnects

A Critical Review on the Electromigration Effect, the Electroplastic Effect, and Perspectives on the Effects of Electric Current Upon Alloy Phase Stability

Theoretical Understanding of Electromigration-Related Surface Diffusion and Current-Induced Force in Ag–Pd Systems

Experimental and Numerical Studies of Stress Migration in Cu Interconnects Embedded in Different Dielectrics