Abstract:The finite element (FE) model updating is a commonly used tool in civil engineering, enabling damage detection, design verification, and load capacity identification. In the FE modelupdating, acceleration responses are generally employed to determine modal properties of a structure, which are subsequently used to update the numerical model. While the acceleration-based model updating has been successful in finding better approximations of the physical systems, the boundary conditions are considered yet to be difficult to accurately estimate as the acceleration responses only correspond to the translational degree-of-freedoms (DOF).Recent advancements in the sensor technology have enabled low-cost, high-precision gyroscopes that can be adopted in the FE modelupdating to provide angular information of a structure. Especially, as the angular DOF is closely related to the rotational stiffness, gyroscopes in the FE model updating would give information of boundary conditions. This study proposes a FE modelupdating strategy based on data fusion of acceleration and angular velocity. The use of acceleration and angular velocity gives richer information than the sole use of acceleration, allowing the enhanced performance particularly in determining the boundary conditions. In this paper, a numerical simulation is presented to demonstrate the proposed FE modelupdating approach using the data fusion. A beam modelled using the Euler-Bernoulli beamelement is consideredwith various boundary conditions (i.e., simply supported, fixed supports, and in between). Optimization variables of the FE model updating are selected to be the elastic modulus and the rotational stiffness of two supports. The proposed FE modelupdating based on acceleration and angular velocityis shown to be able to more accurately identifythe boundary condition than the sole use of acceleration. Consequently, this paper verifies that data fusion of acceleration and angular velocity enhances the performance of the FE modelupdating. Graduate Research Assistant Research Assistant Professor Chair Professor 4) Assistant Professor

Finite Element Model Updating of Space Grid Structures

Dynamical finite element model updating methods by adding known masses

An Improved Model Updating Method by Adding Given Mass

Theoretical research on the energy substructure finite element model updating technology with parametric analysis

Comparative Study of Model Updating Methods Using Frequency Response Function Data

Finite element model updating for structural applications

A Study On Structural Damage Detection Method Based On Model Updating

Model Updating Using Substructural Modal Data

Theory and Implementation of Finite Element Model Updating of the Structures Based on Time Domain Data

Comparison and Discussion of Influential Finite Element Model Updating Methods

Nonlinear finite element model updating with a decentralized approach

Structural Finite Element Model Updating by Using Response Surfaces and Radial Basis Functions

Substructure Based Approach to Finite Element Model Updating

Finite Element Model Updating using Acceleration and Angular Velocity *Hyun-jun

A Updating Method Using Strain Frequency Response Function with Emphasis on Local Structure

Structural Characteristic Responses for Finite Element Model Updating of Structures

Recent Progress on Finite Element Model Updating:From Linearity to Nonlinearity

Static and dynamic finite element model updating of structures based on response surface method: theory and application

Objective Functions and Algorithms in Structural Dynamic Finite Element Model Updating

Model Updating Applied to an Missile Structure

An updating method suitable for finite element model updating of large-scakled structures