Abstract:The finite element (FE) model updating is a commonly used tool in civil engineering, enabling damage detection, design verification, and load capacity identification. In the FE modelupdating, acceleration responses are generally employed to determine modal properties of a structure, which are subsequently used to update the numerical model. While the acceleration-based model updating has been successful in finding better approximations of the physical systems, the boundary conditions are considered yet to be difficult to accurately estimate as the acceleration responses only correspond to the translational degree-of-freedoms (DOF).Recent advancements in the sensor technology have enabled low-cost, high-precision gyroscopes that can be adopted in the FE modelupdating to provide angular information of a structure. Especially, as the angular DOF is closely related to the rotational stiffness, gyroscopes in the FE model updating would give information of boundary conditions. This study proposes a FE modelupdating strategy based on data fusion of acceleration and angular velocity. The use of acceleration and angular velocity gives richer information than the sole use of acceleration, allowing the enhanced performance particularly in determining the boundary conditions. In this paper, a numerical simulation is presented to demonstrate the proposed FE modelupdating approach using the data fusion. A beam modelled using the Euler-Bernoulli beamelement is consideredwith various boundary conditions (i.e., simply supported, fixed supports, and in between). Optimization variables of the FE model updating are selected to be the elastic modulus and the rotational stiffness of two supports. The proposed FE modelupdating based on acceleration and angular velocityis shown to be able to more accurately identifythe boundary condition than the sole use of acceleration. Consequently, this paper verifies that data fusion of acceleration and angular velocity enhances the performance of the FE modelupdating. Graduate Research Assistant Research Assistant Professor Chair Professor 4) Assistant Professor

Finite Element Model Updating of Guangzhou Television and Sightseeing Tower Using Regularization Technique

Finite Element Model Updating of Canton Tower Using Regularization Technique

Structural modal identification and MCMC-based model updating by a Bayesian approach

Nonlinear finite element model updating with a decentralized approach

Finite Element Model Updating using Acceleration and Angular Velocity *Hyun-jun

Research on Finite Element Model Updating Technique Based on Static Strength Test

Finite Element Model Updating for Large Span Spatial Steel Structure Considering Uncertainties

Bayesian model updating of a 20-story office building utilizing operational modal analysis results

A Two-Stage Model Updating Method for the Linear Parts of Structures with Local Nonlinearities

Experimental validation of an efficient strategy for FE model updating and damage identification in tubular structures

DAMAGE IDENTIFICATION OF CIVIL STRUCTURES BASED ON FINITE ELEMENT MODEL UPDATING

Model updating and seismic response of a super tall building in Shanghai

Updating of Finite Element Model in Considering Mode Errors with Fuzzy Theory

Development of a Computer Aided Model Updating System (CAMUS)

Finite element model updating for structural applications

Structural Finite Element Model Updating by Using Response Surfaces and Radial Basis Functions

Finite Element Model Updating of a PSC Box Girder Bridge Using Ambient Vibration Test

Fuzzy Cross-Model Cross-Mode Method And Its Application To Update The Finite Element Model Of Structures

Vibration-based Bayesian model updating of an actual steel truss bridge subjected to incremental damage

Sensitivity-based model updating for structural damage identification using total variation regularization

An updating method suitable for finite element model updating of large-scakled structures