Abstract:Most existing buildings are not equipped with long-term monitoring system. For the structural model updating and damage detection of this type of structures, ambient vibration test is popular as artificial excitation is not required. This article presents in detail the full-scale ambient vibration test, operational modal analysis, and model updating of a tall building. To capture the dynamic properties of the target 20-story building with limited number of sensors, a 15-setup ambient vibration test was designed to cover at least three measurement points (each consists of a vertical and two orthogonal horizontal measured degrees of freedom) for each selected floor. The modal parameters of each setup were extracted from the measured acceleration signals using a frequency domain decomposition method and were combined to form the global mode shape through the least-squares method. Due to the regularity of the building, a simple class of shear building models was employed to capture the dynamic characteristics of the building under lateral vibration. The identified modal parameters of the building were employed for the model updating of the shear building model to identify the distribution of inter-story stiffness. Since the “amount” of the measured information is small when compared to the “amount” of required information for identifying the uncertain parameters, the model updating problem is unidentifiable. To handle this problem, the Markov chain Monte Carlo–based Bayesian model updating method is employed in this study. The identified modal parameters revealed interesting features about the dynamic properties of the building. The well-matched results between model-predicted and identified modal parameters show the validity of the shear building model in this case study. This study provides valuable experience in the area of structural model updating and structural health monitoring.

Finite Element Model Updating of Canton Tower Using Regularization Technique

Finite Element Model Updating of Guangzhou Television and Sightseeing Tower Using Regularization Technique

Update the finite element model of Canton Tower based on direct matrix updating with incomplete modal data

Structural modal identification and MCMC-based model updating by a Bayesian approach

Investigation of FE Modeling Method for Tower Structure of Suspension Bridge 2.Model Updating and Verification

Bayesian model updating of a 20-story office building utilizing operational modal analysis results

Model updating and seismic response of a super tall building in Shanghai

Finite Element Model Updating for the Tower of Long-span Bridges

Finite Element Model Updating for the Runyang Cable-Stayed Bridge Tower Using Ambient Vibration Test Results

A DIRECT MODEL UPDATING METHOD USING ADDED KNOWN STIFFNESS

Finite Element Model Updating of a Steel Jacket Scale Model

A FINITE ELEMENT MODEL UPDATING APPROACH BASED ON INCOMPLETE MODAL DATA

Bayesian model updating of super high‐rise building for construction simulation

Development of a Computer Aided Model Updating System (CAMUS)

Operational Modal Analysis of Canton Tower by A Fast Frequency Domain Bayesian Method

Finite Element Model Updating for a Cable-stayed Bridge Considering the Boundary Condition Constraint and Parameter Sensitivity

Finite element model updating for structural applications

Finite Element Model Updating of Complex Structure Using Component Mode Synthesis Technique

Modal Identification of Canton Tower under Uncertain Environmental Conditions

Model updating experiment of space truss using global and local dynamic information

STATIC MODEL UPDATING METHOD VIA COMPLEX DOMAIN SENSITIVITY ANALYSIS