Abstract:Most existing buildings are not equipped with long-term monitoring system. For the structural model updating and damage detection of this type of structures, ambient vibration test is popular as artificial excitation is not required. This article presents in detail the full-scale ambient vibration test, operational modal analysis, and model updating of a tall building. To capture the dynamic properties of the target 20-story building with limited number of sensors, a 15-setup ambient vibration test was designed to cover at least three measurement points (each consists of a vertical and two orthogonal horizontal measured degrees of freedom) for each selected floor. The modal parameters of each setup were extracted from the measured acceleration signals using a frequency domain decomposition method and were combined to form the global mode shape through the least-squares method. Due to the regularity of the building, a simple class of shear building models was employed to capture the dynamic characteristics of the building under lateral vibration. The identified modal parameters of the building were employed for the model updating of the shear building model to identify the distribution of inter-story stiffness. Since the “amount” of the measured information is small when compared to the “amount” of required information for identifying the uncertain parameters, the model updating problem is unidentifiable. To handle this problem, the Markov chain Monte Carlo–based Bayesian model updating method is employed in this study. The identified modal parameters revealed interesting features about the dynamic properties of the building. The well-matched results between model-predicted and identified modal parameters show the validity of the shear building model in this case study. This study provides valuable experience in the area of structural model updating and structural health monitoring.

Efficient model updating and health monitoring methodology using incomplete modal data without mode matching

Structural modal identification and MCMC-based model updating by a Bayesian approach

Bayesian model updating of a 20-story office building utilizing operational modal analysis results

Bayesian Structural Model Updating Using Ambient Vibration Data Collected by Multiple Setups

Novel Sparse Bayesian Learning for Structural Health Monitoring Using Incomplete Modal Data

Bayesian Model Updating Using Hybrid Monte Carlo Simulation with Application to Structural Dynamic Models with Many Uncertain Parameters

Hierarchical sparse Bayesian learning for structural health monitoring with incomplete modal data

Model Updating for Uncertain Structures with Interval Parameters

A Bayesian neural network approach for probabilistic model updating using incomplete modal data

Hierarchical Bayesian Operational Modal Analysis: Theory and Computations

Structural model updating using combined global mode and local primary frequency

Model reduction-based Bayesian updating of non-classically damped systems using modal data from multiple setups

Vibration-based Bayesian model updating of civil engineering structures applying Gaussian process metamodel

Using incomplete complex modes for model updating of monopiled offshore wind turbines

Finite element model updating for repeated eigenvalue structures via the reduced-order model using incomplete measured modes

Development of a Computer Aided Model Updating System (CAMUS)

A novel dynamic model updating method for composite laminate structures considering non-probabilistic uncertainties and correlations

Structural damage detection based on fundamental Bayesian two-stage model considering the modal parameters uncertainty

A New Stochastic Model Updating Method Based on Improved Cross-Model Cross-Mode Technique

Real-time structural model updating using local eigenvalue modification procedure for applications in high-rate dynamic events

Structural Model Updating of a Steel Truss Structure Utilizing Ambient Vibration Measurement