Abstract:The finite element (FE) model updating is a commonly used tool in civil engineering, enabling damage detection, design verification, and load capacity identification. In the FE modelupdating, acceleration responses are generally employed to determine modal properties of a structure, which are subsequently used to update the numerical model. While the acceleration-based model updating has been successful in finding better approximations of the physical systems, the boundary conditions are considered yet to be difficult to accurately estimate as the acceleration responses only correspond to the translational degree-of-freedoms (DOF).Recent advancements in the sensor technology have enabled low-cost, high-precision gyroscopes that can be adopted in the FE modelupdating to provide angular information of a structure. Especially, as the angular DOF is closely related to the rotational stiffness, gyroscopes in the FE model updating would give information of boundary conditions. This study proposes a FE modelupdating strategy based on data fusion of acceleration and angular velocity. The use of acceleration and angular velocity gives richer information than the sole use of acceleration, allowing the enhanced performance particularly in determining the boundary conditions. In this paper, a numerical simulation is presented to demonstrate the proposed FE modelupdating approach using the data fusion. A beam modelled using the Euler-Bernoulli beamelement is consideredwith various boundary conditions (i.e., simply supported, fixed supports, and in between). Optimization variables of the FE model updating are selected to be the elastic modulus and the rotational stiffness of two supports. The proposed FE modelupdating based on acceleration and angular velocityis shown to be able to more accurately identifythe boundary condition than the sole use of acceleration. Consequently, this paper verifies that data fusion of acceleration and angular velocity enhances the performance of the FE modelupdating. Graduate Research Assistant Research Assistant Professor Chair Professor 4) Assistant Professor

Finite Element Model Updating using Acceleration and Angular Velocity *Hyun-jun

Nonlinear finite element model updating with a decentralized approach

Estimation Of Deflections Of Bridge By Two-Step Model Updating Approach Based On Ambient Acceleration Measurements

Finite Element Model Updating of a PSC Box Girder Bridge Using Ambient Vibration Test

Model updating of a shear‐wall tall building using various vibration monitoring data: Accuracy and robustness

Two-step Indirect Static Deflection Estimation of Bridges Based on Ambient Acceleration Measurements

Updating numerical models towards time domain alignment of structural dynamic responses with a limited number of sensors

Finite Element Model Updating of Guangzhou Television and Sightseeing Tower Using Regularization Technique

Experimental validation of an efficient strategy for FE model updating and damage identification in tubular structures

A New Multi-Objective Approach to Finite Element Model Updating

Finite element model updating through derivative-free optimization algorithm

Finite element model updating for structural applications

Improved Finite Element Model Updating of a Highway Viaduct Using Acceleration and Strain Data

Structural finite element model updating considering soil-structure interaction using ls-dyna in loop

A sensitivity-based nonlinear finite element model updating method for nonlinear engineering structures

New Methods for Finite Element Model Updating Problems

Structural modal identification and MCMC-based model updating by a Bayesian approach

Finite element model updating and response prediction of a frame structure based on optimal sensor placement

Finite element model updating method for continuous girder bridges using monitoring responses and traffic videos

Dynamic sensitivity-based finite element model updating for nonlinear structures using time-domain responses

Finite Element Model Updating in the Vibration of Bladed Disk: Shaft Assemblies