Abstract:The finite element (FE) model updating is a commonly used tool in civil engineering, enabling damage detection, design verification, and load capacity identification. In the FE modelupdating, acceleration responses are generally employed to determine modal properties of a structure, which are subsequently used to update the numerical model. While the acceleration-based model updating has been successful in finding better approximations of the physical systems, the boundary conditions are considered yet to be difficult to accurately estimate as the acceleration responses only correspond to the translational degree-of-freedoms (DOF).Recent advancements in the sensor technology have enabled low-cost, high-precision gyroscopes that can be adopted in the FE modelupdating to provide angular information of a structure. Especially, as the angular DOF is closely related to the rotational stiffness, gyroscopes in the FE model updating would give information of boundary conditions. This study proposes a FE modelupdating strategy based on data fusion of acceleration and angular velocity. The use of acceleration and angular velocity gives richer information than the sole use of acceleration, allowing the enhanced performance particularly in determining the boundary conditions. In this paper, a numerical simulation is presented to demonstrate the proposed FE modelupdating approach using the data fusion. A beam modelled using the Euler-Bernoulli beamelement is consideredwith various boundary conditions (i.e., simply supported, fixed supports, and in between). Optimization variables of the FE model updating are selected to be the elastic modulus and the rotational stiffness of two supports. The proposed FE modelupdating based on acceleration and angular velocityis shown to be able to more accurately identifythe boundary condition than the sole use of acceleration. Consequently, this paper verifies that data fusion of acceleration and angular velocity enhances the performance of the FE modelupdating. Graduate Research Assistant Research Assistant Professor Chair Professor 4) Assistant Professor

Estimation Of Deflections Of Bridge By Two-Step Model Updating Approach Based On Ambient Acceleration Measurements

Two-step Indirect Static Deflection Estimation of Bridges Based on Ambient Acceleration Measurements

FE-based Bridge Weigh-in-motion Based on an Adaptive Augmented Kalman Filter

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

Finite Element Model Updating of a PSC Box Girder Bridge Using Ambient Vibration Test

Model Updating Concept Using Bridge Weigh-in-Motion Data

Finite Element Model Updating using Acceleration and Angular Velocity *Hyun-jun

Vibration-based Bayesian model updating of an actual steel truss bridge subjected to incremental damage

Structural Performance Evaluation of A Steel-Plate Girder Bridge Using Ambient Acceleration Measurements

HEALTH-MONITORING METHOD FOR BRIDGES UNDER ORDINARY TRAFFIC LOADINGS

Time-Domain Finite Element Model Updating for Operational Monitoring and Damage Identification of Bridges

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

Finite element model updating method for continuous girder bridges using monitoring responses and traffic videos

Model Updating for Binzhou Yellow River Highway Bridge Considering Uncertainties

Displacement estimation of bridge structures using data fusion of acceleration and strain measurement incorporating finite element model

Numerical Model Updating and Validation of a Truss Railway Bridge considering Train‐Track‐Bridge Interaction Dynamics

Bayesian Model Updating of a Simply-Supported Truss Bridge Based on Dynamic Responses

Bridge finite element model updating using stochastic vehicle-induced static response monitoring data

Evaluation of Static Displacement Based on Ambient Vibration for Bridge Safety Management

Refactoring and Optimization of Bridge Dynamic Displacement Based on Ensemble Empirical Mode Decomposition

Experimental and numerical studies on model updating method of damage severity identification utilizing four cost functions