Abstract:Nucleant substrates may induce formation of several quasilayers in the liquid metals in contact with the solid substrates. These liquid layers, called prenucleation layers (PNLs), normally form above the liquidus temperatures of the metal alloys and thus are believed to significantly affect the heterogeneous nucleation mechanism. In this work, a comprehensive study of the (0001) sapphire-liquid Al interfaces was conducted using the ab initio molecular dynamics method to unveil the key factors determining the substrate-liquid metal interfacial structural features, focusing primarily on revealing the underlying mechanisms of the PNL formation. Two types of (0001) sapphire surfaces, i.e., nonhydroxylated and hydroxylated surfaces, were investigated. Essentially the same equilibrated interfacial structure was observed for all the interfaces with the nonhydroxylated sapphire surfaces, featuring an Al-rich termination of the substrates and two distinguishable adjacent PNLs. These typical structural features are similar to the (root 31 x root 31) R +/- 9 degrees reconstructed surface, which supports the previous experimental observation that the presence of liquid Al promotes the reconstruction of the (0001) sapphire surface. A completely different structure was found at the interface with fully hydroxylated sapphire surface: the PNLs are absent, replaced by an Al-depleted region. To unveil the factors influencing the interfacial structure, we first analyzed the nature of interfacial bonding. Strong covalent bonds were observed between the nonhydroxylated sapphire surfaces and liquid Al, which constitute a relatively large proportion of the interfacial bonds at such systems. On the contrary, weak van der Waals force is the primary interaction between the fully hydroxylated sapphire surface and liquid Al. Then we characterized the dynamical behaviors of the substrate surfaces in the substrate-liquid Al interfaces. Better mobility and larger vibration amplitude were found for the fully hydroxylated sapphire surface compared to the equilibrated nonhydroxylated sapphire surface. We demonstrated that both the stronger bonding strength and the lower mobility of interfacial atoms contribute to the formation of the PNLs at the nonhydroxylated sapphire-liquid Al interfaces. Finally, the formation mechanism of the PNLs at the substrate-liquid metal interface is summarized.

Bonding Layer Microstructures and Mechanical Behavior of Sapphire/Sapphire Joints Diffusion-Bonded Using Mgo-Al2o3-Sio2 Interlayer

Novel design of sapphire/spinel transparent ceramic joints with double glass interlayers by coating and bonding

Heterogeneous material joining of sapphire and TC4 alloy with a functionally graded interface

Microstructure and Properties of Porous Si3N4/Dense Si3N4 Joints Bonded Using RE–Si–Al–O–N (RE = Y or Yb) Glasses

Microstructure and Properties of Porous Si3N4/Dense Si3N4 Joints Bonded Using RE-Si-Al-O-N (RE = Y or Yb) Glasses

Microstructure, mechanical and optical properties of MgAl2O4/MgAl2O4 joints bonded using CaO-Al2O3-SiO2 glass filler

Microstructure evolution and mechanical properties of YAG/YAG joint using bismuth-borate glass

Research on the interfacial microstructure and mechanical properties of glass/Mg joint prepared by anodic bonding and vacuum diffusion bonding

Interfacial evolution mechanism of MgAl2O4/MgAl2O4 joints bonded with lanthanum glass

Microstructure and Mechanical Property of Titanium Film-Modified Sapphire/High Nb-TiAl Alloy Joints Using Ag-Cu Filler by Vacuum Brazing

Research advances in joining processes of sapphire

Microstructure and mechanical properties of SiC joint using anorthite based glass-ceramic and first principles calculation of joint interface

Microstructure and performance of graphite/TZM alloy joints with different interfacial structures formed by vacuum diffusion bonding

Effects of the joining process on the microstructure and properties of liquid-phase-sintered SiC-SiC joints formed with Ti foil

Microstructure evolution and interfacial bonding mechanisms of ultrasonically soldered sapphire/Al dissimilar joints using Sn-based solders

Study on the mechanism of glass-SiC-glass anodic bonding process

Ceramic Bonding and Joint'S Strengthening Through Forming Intermetallic Compounds in Situ

Unveiling The Influence Of Interfacial Bonding And Dynamics On Solid/Liquid Interfacial Structures: An Ab Initio Molecular Dynamics Study Of (0001) Sapphire-Liquid Al Interfaces

Preparation and Mechanical Properties of Laminated Zirconium Diboride/molybdenum Composites Sintered by Spark Plasma Sintering

Microstructure and shear strength of SiC/Zr joint brazed with LiAlSiO4/graphene-coated Cu-foam composite interlayer

Sintering, microstructure, and mechanical properties of vitrified bond diamond composite