Abstract:Residual stress is a key factor affecting the properties of ceramic/metal brazed joints. In this work, the residual stress of sapphire/Ti6Al4V alloy joints brazed with CuTi+B composite filler after cooling and reheated to 400 °C was calculated by finite element numerical simulation method. The effect of the B content in the filler and the filler thickness on the residual stress distribution of brazed joints after cooling was studied. The results show that the residual stress is mainly concentrated in the area near the filler layer. The maximum von Mises stress is located in the filler layer and a large Z-axial (the direction perpendicular to the brazed surface) tensile stress is on the sapphire near the filler layer. The B content and the filler thickness have no significant effect on the distribution of residual stress, but they have a certain effect on the value of residual stress of the sapphire near the filler layer. The von Mises stress and the Z-axial stress of this area increase with the increase of B content, and they decrease first and then increases with the increase of filler thickness. When the sapphire/Ti6Al4V joint is reheated to 400 °C, its residual stress significantly reduces and the residual stress on the periphery of the filler layer changes from compressive stress to tensile stress. As the B content is 1 and 3 wt%, the sapphire/Ti6Al4V joint with a smaller residual stress can be obtained. The microstructure observation and shear tests of the joints show that cracks appear in the high stress concentration area and the fracture starts from the area with maximum axial tensile stress, which verifies the accuracy of the simulation results.

Heterogeneous material joining of sapphire and TC4 alloy with a functionally graded interface

Microstructure and Mechanical Performance of Composite Joints of Sapphire by Ultrasonic-Assisted Brazing

Ultrasonic-assisted brazing of sapphire with high strength Al–4.5Cu–1.5Mg alloy

Microstructure and Mechanical Property of Titanium Film-Modified Sapphire/High Nb-TiAl Alloy Joints Using Ag-Cu Filler by Vacuum Brazing

Bonding Layer Microstructures and Mechanical Behavior of Sapphire/Sapphire Joints Diffusion-Bonded Using Mgo-Al2o3-Sio2 Interlayer

Interfacial Microstructure and Mechanical Properties of Titanium/Sapphire Joints Brazed with AuSn20 Filler Metal

Microstructure and Mechanical Property of Sapphire Joints Reinforced Byal4b2o9 Whiskers

Evolution of Interfacial Structures and Mechanical Performance of Sapphire and Sn–9Zn–2Al Joints by Ultrasound

Femtosecond Laser Welding of Sapphire-Copper Using a Thin Film Titanium Interlayer

Microstructure and Characterization of Interfacial Phases of Sapphire/sapphire Joint Bonded Using Bi2O3–B2O3–ZnO Glass

Bonding and Strengthening Mechanism on Ultrasonic-Assisted Soldering of Sapphire Using Sn-3.5Ag-4Al Solder

Improvement of microstructure and mechanical properties of Sapphire/Kovar alloy joints brazed with Ag-Cu-Ti composite filler by adding B powders

High-Strength and Impermeable Sapphire/Aluminum Joints Fabricated by Ultrafast Laser Microwelding: Microstructures and Joining Mechanism

Effects of surface roughness on the microstructure and mechanical properties of dissimilar sapphire/Invar36 alloy joints made by ultrashort pulsed laser micro-welding

Joining of Sapphire and Hot Pressed Al2O3 Using Ag70.5Cu27.5Ti2 Brazing Filler Metal

Research advances in joining processes of sapphire

An Efficient Method to Engage Oxide Ceramics in Low-Temperature Interfacial Reactions:Microstructure Evolution and Kinetics Behaviors Based on Supercooling in a Transient Liquid Phase Bonding Joint

Residual Stress Distribution in Sapphire/Ti6Al4V Alloy Joints Brazed with CuTi+B Composite Fillers

Microstructural Evolution, Mechanical Properties, and FEM Analysis of the Residual Stress of Sapphire Joints Brazed with a Novel Borate Glass

Effects of the joining process on the microstructure and properties of liquid-phase-sintered SiC-SiC joints formed with Ti foil

Microstructure evolution and interfacial bonding mechanisms of ultrasonically soldered sapphire/Al dissimilar joints using Sn-based solders