Abstract:The flame fuel cell is a novel kind of fuel cell that directly combines a fuel-rich flame and solid oxide fuel cells together. Because of their simple setup, low cost, quick start-up and shut-down as well as no extra thermal management, flame fuel cells have great potential in micro-combined heat and power systems and portable applications. However, the conventional solid oxide fuel cell configurations including planar ones and tubular ones, may cause some problems when used in flame fuel cells such as thermal stress, secondary flame front, and difficulty for mass production. To solve these problems, a newly developed flat-chip solid oxide fuel cell is proposed to be used in the flame fuel cell in this study. Combining the merits of both planar and tubular solid oxide fuel cells, the flat-chip fuel cell is advantageous for its simple fabrication technology, good thermal shock resistance and feasibility to scale up. A flat-chip solid oxide fuel cell is fabricated and then integrated with a catalytically enhanced porous media combustor, demonstrating a novel flat-chip flame fuel cell system. The heating time for the flat-chip solid oxide fuel cell by the fuel-rich flame is less than 10 min from room temperature to 800 degrees C, with a temperature change rate of 5 degrees C/s in the first stage. The start-up time of the flat-chip flame fuel cell is less than 10 s. When the gas velocity is 6.0 cm/s and the equivalence ratio is 2.0, a peak power density of 179 mW/cm(2) is obtained for a single cell. Although there exists a remarkable temperature gradient, a small current degradation of 0.01 A/h is observed after a constant-voltage discharging at 0.5 V for 8 hrs. In addition, the flat-chip solid oxide fuel cell can be further scaled up in dimension, resulting in higher fuel utilization of flame fuel cell.

A no chamber fuel cell using ethanol as flame

A High-Performance Flame Fuel Cell Using Ethanol As Fuels

A High-Performance No-Chamber Fuel Cell Operated on Ethanol Flame

Characterization of the Ni-ScSZ anode with a LSCM–CeO2 catalyst layer in thin film solid oxide fuel cell running on ethanol fuel

A Highly Coking-Resistant Solid Oxide Fuel Cell with a Nickel Doped Ceria: Ce1−xNixO2−y Reformation Layer

Experimental Characterization of a Direct Methane Flame Solid Oxide Fuel Cell Power Generation Unit

A Coking-Tolerance Dendritic Anode with Exceptional Power Density Toward Direct Ethanol-Fueled Solid Oxide Fuel Cells

Flat-chip Flame Fuel Cell Operated on a Catalytically Enhanced Porous Media Combustor

Direct liquid methanol-fueled solid oxide fuel cell

Performance Characteristics of a Micro-tubular Solid Oxide Fuel Cell Operated with a Fuel-rich Methane Flame

Multicomponent nanoporous Al–Ni–Cu–Pt–Pd–Co as highly stable anode catalysts in a flexible room-temperature pure ethanol–powered solid-state fuel cell

Direct power generation from ethanol by solid oxide fuel cells with an integrated catalyst layer

Direct methanol oxygen-ion conducting solid oxide fuel cell with an integrated in-situ cracking reactor

Direct Flame Fuel Cell Performance Using A Multi-Element Diffusion Flame Burner

Flexible Solid‐State Direct Ethanol Fuel Cell Catalyzed by Nanoporous High‐Entropy Al‐Pd‐Ni‐Cu‐Mo Anode and Spinel (almnco)3o4 Cathode

Power and Heat Co-Generation by Micro-Tubular Flame Fuel Cell on a Porous Media Burner

Flexible Solid‐State Direct Ethanol Fuel Cell Catalyzed by Nanoporous High‐Entropy Al‐Pd‐Ni‐Cu‐Mo Anode and Spinel (AlMnCo) 3 O 4 Cathode

Sputter-deposited medium-temperature solid oxide fuel cells with multi-layer electrolytes

Use of A Catalyst Layer for Propane Partial Oxidation in Solid Oxide Fuel Cells

Biogas-Fueled Flame Fuel Cell for Micro-Combined Heat and Power System

Infiltrated Ni0.08Co0.02Ce0.02CeO2-x@Ni0.8Co0.2 Catalysts for a Finger-Like Anode in Direct Methane-Fueled Solid Oxide Fuel Cells