Abstract:The flame fuel cell is a novel kind of fuel cell that directly combines a fuel-rich flame and solid oxide fuel cells together. Because of their simple setup, low cost, quick start-up and shut-down as well as no extra thermal management, flame fuel cells have great potential in micro-combined heat and power systems and portable applications. However, the conventional solid oxide fuel cell configurations including planar ones and tubular ones, may cause some problems when used in flame fuel cells such as thermal stress, secondary flame front, and difficulty for mass production. To solve these problems, a newly developed flat-chip solid oxide fuel cell is proposed to be used in the flame fuel cell in this study. Combining the merits of both planar and tubular solid oxide fuel cells, the flat-chip fuel cell is advantageous for its simple fabrication technology, good thermal shock resistance and feasibility to scale up. A flat-chip solid oxide fuel cell is fabricated and then integrated with a catalytically enhanced porous media combustor, demonstrating a novel flat-chip flame fuel cell system. The heating time for the flat-chip solid oxide fuel cell by the fuel-rich flame is less than 10 min from room temperature to 800 degrees C, with a temperature change rate of 5 degrees C/s in the first stage. The start-up time of the flat-chip flame fuel cell is less than 10 s. When the gas velocity is 6.0 cm/s and the equivalence ratio is 2.0, a peak power density of 179 mW/cm(2) is obtained for a single cell. Although there exists a remarkable temperature gradient, a small current degradation of 0.01 A/h is observed after a constant-voltage discharging at 0.5 V for 8 hrs. In addition, the flat-chip solid oxide fuel cell can be further scaled up in dimension, resulting in higher fuel utilization of flame fuel cell.

Biogas-Fueled Flame Fuel Cell for Micro-Combined Heat and Power System

Start-Up and Operation Characteristics of A Flame Fuel Cell Unit

Power and Heat Co-Generation by Micro-Tubular Flame Fuel Cell on a Porous Media Burner

Micro-tubular Solid Oxide Fuel Cell Stack Operated with Catalytically Enhanced Porous Media Fuel-Rich Combustor

Performance Characteristics of a Micro-tubular Solid Oxide Fuel Cell Operated with a Fuel-rich Methane Flame

Highly Thermal-integrated Flame Fuel Cell Module with High Temperature Heatpipe

Experimental Characterization of a Direct Methane Flame Solid Oxide Fuel Cell Power Generation Unit

Flat-chip Flame Fuel Cell Operated on a Catalytically Enhanced Porous Media Combustor

A Robust Flat-Chip Solid Oxide Fuel Cell Coupled with Catalytic Partial Oxidation of Methane

Integration of Solid Oxide Fuel Cells with Multi-Element Diffusion Flame Burners

Key CO2 capture technology of pure oxygen exhaust gas combustion for syngas-fueled high-temperature fuel cells

Direct Operation of Solid Oxide Fuel Cells on Low-Concentration Oxygen-Bearing Coal-Bed Methane with High Stability

Oxy-combustion of Coal in Liquid-Antimony-anode Solid Oxide Fuel Cell System

Catalytically Enhanced Methane-Rich Combustion by Porous Media Reactor

Autothermal reforming of methane over an integrated solid oxide fuel cell reactor for power and syngas co-generation

Improved performance of a residential combined heat and power system by integrating compact fuel processor and proton exchange membrane fuel cell

Direct Power Generation from Low Concentration Coal‐Bed Gas by a Catalyst‐Modified Solid Oxide Fuel Cell

Fabrication and Operation of Flow‐through Tubular SOFCs for Electric Power and Synthesis Gas Cogeneration from Methane

Optimization of solid oxide fuel cell system integrated with biomass gasification, solar-assisted carbon capture and methane production

Study on Pure Oxygen Exhaust Gas Combustion: Key Technology of CO2 Capture for High Temperature Fuel Cell With Coal Syngas

Comprehensive performance assessment of a novel biomass-based CCHP system integrated with SOFC and HT-PEMFC