Abstract:Performance degradation caused by carbon deposition substantially restricts the development of direct methane solid oxide fuel cells (SOFCs). Here, an internal reforming layer composed of Ni supported on proton conducting La-doped ceria, such as La2Ce2O7 (LDC) and La1.95Sm0.05Ce2O7 (LSDC) is applied over conventional Ni-Ce0.8Sm0.2O2-x (SDC) anodes for direct methane SOFCs. The proton conducting layer can adsorb water for internal reforming thus significantly improving the performance of the direct methane SOFCs. In situ Raman and FTIR results confirm the water adsorption capacity of LDC and LSDC. They also exhibit excellent phase stability in wet CO2 at 650 °C for 10 h, which ensures that the additional catalyst layer maintains structure stability during the internal reforming. In wet methane at 650 °C, the peak power density of the conventional cell is only 580 ± 20 mW cm-2, and increases to 699 ± 20 and 639 ± 20 mW cm-2 with the addition of Ni-LDC and -LSDC layers, respectively. For the stability test in wet methane at 650 °C and 0.2 A cm-2, the voltage of the conventional cell starts to drop dramatically in 10 h, while the Ni-LDC and -LSDC catalyst layers operate stably in 26 h under the identical conditions. These catalyst layers even show comparable stability in dry and wet methane in 26 h, but for longer operation, the wet methane is still preferred for maintaining the stability of the cell.

Direct power generation from ethanol by solid oxide fuel cells with an integrated catalyst layer

High-stable power generation from low concentration ethanol by catalyst layer modified solid oxide fuel cells

Direct power generation from methanol by solid oxide fuel cells with a Cu-ceria based catalyst layer

Multicomponent nanoporous Al–Ni–Cu–Pt–Pd–Co as highly stable anode catalysts in a flexible room-temperature pure ethanol–powered solid-state fuel cell

Anode Catalysts for Solid Oxide Fuel Cells That Run Directly on Hydrocarbon Fuels

Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer

Ethanol-fueled metal supported solid oxide fuel cells with a high entropy alloy internal reforming catalyst

Co-Generation of Electricity and Syngas on Proton-Conducting Solid Oxide Fuel Cell with A Perovskite Layer As A Precursor of A Highly Efficient Reforming Catalyst

Catalyst with CeO 2 and Ni Nanoparticles on a LaCrO 3 -Based Perovskite Substrate for Bio-Alcohol Steam Reforming and SOFC Power Generation

Performance and durability of a layered proton conducting solid oxide fuel cell fueled by the dry reforming of methane

Flexible Solid‐State Direct Ethanol Fuel Cell Catalyzed by Nanoporous High‐Entropy Al‐Pd‐Ni‐Cu‐Mo Anode and Spinel (AlMnCo) 3 O 4 Cathode

Direct-methane solid oxide fuel cells with an <i>in situ</i> formed Ni-Fe alloy composite catalyst layer over Ni-YSZ anodes

Direct carbon dioxide-methane solid oxide fuel cells integrated for high-efficiency power generation with La0.75Sr0.25Cr0.5Fe0.4Ni0.1O3–δ-based dry reforming catalyst

Direct liquid methanol-fueled solid oxide fuel cell

Enhanced electrochemical performance and durability for direct CH4–CO2 solid oxide fuel cells with an on-cell reforming layer

La0.6Sr0.4Co0.2Fe0.8O3-δ Nanoparticles Modified Ni-based Anode for Direct Methane-Fueled SOFCs

A NiFeCu alloy anode catalyst for direct-methane solid oxide fuel cells

Steam Reforming Catalytic Layer on Anode-Supported and Metal-Supported Solid Oxide Fuel Cells for Direct Ethanol Operation

Proton-Conducting La-Doped Ceria-Based Internal Reforming Layer for Direct Methane Solid Oxide Fuel Cells

High performance of direct ethanol-fueled protonic ceramic fuel cells via ethanol steam reforming using non-noble metal catalysts

Conversion of CO 2 through solid oxide co-electrolysis cell with cobalt-free fuel electrode