Abstract:The flame fuel cell is a novel kind of fuel cell that directly combines a fuel-rich flame and solid oxide fuel cells together. Because of their simple setup, low cost, quick start-up and shut-down as well as no extra thermal management, flame fuel cells have great potential in micro-combined heat and power systems and portable applications. However, the conventional solid oxide fuel cell configurations including planar ones and tubular ones, may cause some problems when used in flame fuel cells such as thermal stress, secondary flame front, and difficulty for mass production. To solve these problems, a newly developed flat-chip solid oxide fuel cell is proposed to be used in the flame fuel cell in this study. Combining the merits of both planar and tubular solid oxide fuel cells, the flat-chip fuel cell is advantageous for its simple fabrication technology, good thermal shock resistance and feasibility to scale up. A flat-chip solid oxide fuel cell is fabricated and then integrated with a catalytically enhanced porous media combustor, demonstrating a novel flat-chip flame fuel cell system. The heating time for the flat-chip solid oxide fuel cell by the fuel-rich flame is less than 10 min from room temperature to 800 degrees C, with a temperature change rate of 5 degrees C/s in the first stage. The start-up time of the flat-chip flame fuel cell is less than 10 s. When the gas velocity is 6.0 cm/s and the equivalence ratio is 2.0, a peak power density of 179 mW/cm(2) is obtained for a single cell. Although there exists a remarkable temperature gradient, a small current degradation of 0.01 A/h is observed after a constant-voltage discharging at 0.5 V for 8 hrs. In addition, the flat-chip solid oxide fuel cell can be further scaled up in dimension, resulting in higher fuel utilization of flame fuel cell.

A High-Performance No-Chamber Fuel Cell Operated on Ethanol Flame

A High-Performance Flame Fuel Cell Using Ethanol As Fuels

A no chamber fuel cell using ethanol as flame

Operation of Anode-Supported Solid Oxide Fuel Cells on Propane–air Fuel Mixtures

Propane Fueled Solid Oxide Fuel Cells

Direct liquid methanol-fueled solid oxide fuel cell

80 Hours operation of a tubular solid oxide fuel cell using propane/air

Performance Characteristics of a Micro-tubular Solid Oxide Fuel Cell Operated with a Fuel-rich Methane Flame

Experimental Characterization of a Direct Methane Flame Solid Oxide Fuel Cell Power Generation Unit

Performance of Anode-Supported Single-Chamber Solid Oxide Fuel Cells

Use of A Catalyst Layer for Propane Partial Oxidation in Solid Oxide Fuel Cells

Direct methanol oxygen-ion conducting solid oxide fuel cell with an integrated in-situ cracking reactor

A Robust Flat-Chip Solid Oxide Fuel Cell Coupled with Catalytic Partial Oxidation of Methane

Insights on the electrochemical performance of a molten proton conductor fuel cell with internal methanol reformer

A robust direct-propane solid oxide fuel cell with hierarchically oriented full ceramic anode consisting with in-situ exsolved metallic nano-catalysts

Direct Flame Fuel Cell Performance Using A Multi-Element Diffusion Flame Burner

Ethanol-fueled metal supported solid oxide fuel cells with a high entropy alloy internal reforming catalyst

Advance in Portable Solid Oxide Fuel Cells Operating on Propane

Flat-chip Flame Fuel Cell Operated on a Catalytically Enhanced Porous Media Combustor

Biogas-Fueled Flame Fuel Cell for Micro-Combined Heat and Power System

A Direct Flame Solid Oxide Fuel Cell for Potential Combined Heat and Power Generation