Abstract:A novel enhancement-mode (E-mode) high electron mobility transistor (HEMT) with three-dimensional electron gas (3DEG) and three-dimensional hole gas (3DHG) is presented. It features a GaN-top layer, a positive graded AlGaN barrier layer (GAL), and a negative graded AlGaN back barrier layer (GABL) (wherein the positive/negative doping gradient is defined with respect to the growth direction), with a vertical conduction channel aside a MIS trench gate. The 2DHG is formed at the interface between the GaN-top layer and GAL. The 3DEG and 3DHG are formed due to the polarization induced by linearly grading Aluminum (Al) composition from 0 to x(Al) in GAL and 0.4 to 0 in GABL, respectively. The source and drain locate at the same side of the MIS trench gate, and the source contacts with the gate. Firstly, 2DHG blocks the electron current conduction path between the source and 3DEG so as to achieve E-mode. Secondly, the high-sheet density 3DEG in GAL greatly increases the on-state current. Thirdly, the leakage current effectively is reduced by the 3DHG in GABL, improving the breakdown voltage. Fourthly, a high breakdown voltage (BV) is obtained because the polarization junction formed by the polarization charges in GAL and GABL improves the electric field distribution in the drift region. The BV of the proposed HEMT increases to 1080 V from 47 V of the conventional MIS HEMT at the same length of the drift region, and specific on-resistance (R-on,(sp)) decreases to 0.29 m Omega cm(2) from 0.64 m Omega cm(2) in simulation.

Breakdown Voltage Enhancement For Gan High Electron Mobility Transistors

An AlGaN/GaN HEMT with a reduced surface electric field and an improved breakdown voltage

GaN high electron mobility transistors with localized Mg doping and Drain Metal Extension

Breakdown voltage improvement of enhancement mode AlGaN/GaN HEMT by a novel step-etched GaN buffer structure

Breakdown Voltage Enhancement in GaN Channel and AlGaN Channel HEMTs Using Large Gate Metal Height

Breakdown enhancement and hot electrons mitigation for p-GaN gate HEMTs by electric field modulation

Breakdown Voltage Enhancement for Power AlGaN/GaN HEMTs with Air-bridge Field Plate

An Algan/Gan Hemt with Enhanced Breakdown and A Near-Zero Breakdown Voltage Temperature Coefficient

Breakdown Voltage Enhancement in AlGaN HEMTs with Local P-Doped Region in the Back-Barrier

Study of Normally-Off AlGaN/GaN HEMT with Microfield Plate for Improvement of Breakdown Voltage

Breakdown Voltage Enhancement and Specific On-Resistance Reduction in Depletion-Mode GaN HEMTs by Co-Modulating Electric Field

Breakdown-Voltage-Enhancement Technique for RF-Based AlGaN/GaN HEMTs with a Source-Connected Air-Bridge Field Plate

Simulation Design of a High-Breakdown-voltage P-Gan-gate GaN HEMT with a Hybrid AlGaN Buffer Layer for Power Electronics Applications

High Breakdown AlGaN/GaN MOSHEMT with Thermal Oxidized Ni/Ti As Gate Insulator

High Performance Enhancement-Mode HEMT with 3DEG to Conduct Current and 3DHG As Back Barrier

High Breakdown Voltage AlGaN/GaN HEMTs with a Dipole Layer for Microwave Power Applications

AlN/beta-Ga2O3 based HEMT: a potential pathway to ultimate high power device

A Novel Step–Doped Channel AlGaN/GaN HEMTs with Improved Breakdown Performance

Constructing drain surrounded double gate structure in AlGaN/GaN HEMT for boosting breakdown voltage

A high breakdown voltage AlGaN/GaN MOSHEMT using thermal oxidized Al-Ti as the gate insulator

Schottky-Contact Technology in InAlN/GaN HEMTs for Breakdown Voltage Improvement