Abstract:In recent years, a variety of film thickness measurement techniques for copper chemical mechanical planarization (CMP) are subsequently proposed. In this paper, the eddy-current technique is used. In the control system of the CMP tool developed in the State Key Laboratory of Tribology, there are in situ module and off-line module for measurement subsystem. The in situ module can get the thickness of copper film on wafer surface in real time, and accurately judge when the CMP process should stop. This is called end-point detection. The off-line module is used for multi-points measurement after CMP process, in order to know the thickness of remained copper film. The whole control system is structured with two levels, and the physical connection between the upper and the lower is achieved by the industrial Ethernet. The process flow includes calibration and measurement, and there are different algorithms for two modules. In the process of software development, C++ is chosen as the programming language, in combination with Qt OpenSource to design two modules' GUI and OPC technology to implement the communication between the two levels. In addition, the drawing function is developed relying on Matlab, enriching the software functions of the off-line module. The result shows that the control system is running stably after repeated tests and practical operations for a long time.

Low Downforce Copper Chemical Mechanical Polishing Distributed Control System

The Application of Intelligence PID Control in Pneumatic System of Superfinishing - Machine

Study on the Removal Function of Annular Polishing Pad Based on the Computer Controlled Polishing Technology

CMP Pressure Control Based on Dual-Modes Controller

Wafer Back Pressure Control and Optimization in the Cmp Process

Control System of Intelligent Polishing Machine at Nanometer Level

Study on decoupling inverse control of CMP multi-zones pressure system

Design Of Automatic Control System Of Metallographic Polishing Machine

Chemical mechanical polishing: Theory and experiment

A Reliable Control System for Measurement on Film Thickness in Copper Chemical Mechanical Planarization System.

Analysis on Pad Effects in Chemical Mechanical Polishing

Study and Development of Automatic Control System for Chamfering Machine Based on PLC

Mechanism and Applications of Chemical and Mechanical Polishing

Identification Research on Cmp Multi-Zones Pressure System

The CMP by Polishing with GiP Dressed by BODD

An in Situ End-Point Detection System Using Motor Power Signal for Chemical Mechanical Planarization Process

Chemical Mechanical Polishing Method and Practice

Progress in Material Removal Mechanisms of Surface Polishing with Ultra Precision

Polystyrene-Silica Composite Particles and Their Copper Chemical Mechanical Polishing Performances

Decoupled Adaptive Inverse Control of CMP Multi-Zone Pressure Systems Based on DRNN