Abstract:In this work, the authors demonstrate a novel vertically-stacked thin film transistor (TFT) architecture for heterogeneously complementary inverter applications, composed of p-channel polycrystalline silicon (poly-Si) and n-channel amorphous indium tungsten oxide (a-IWO), with a low footprint than planar structure. The a-IWO TFT with channel thickness of approximately 3-4 atomic layers exhibits high mobility of 24 cm2 V-1 s-1 , near ideally subthreshold swing of 63 mV dec-1 , low leakage current below 10-13 A, high on/off current ratio of larger than 109 , extremely small hysteresis of 0 mV, low contact resistance of 0.44 kΩ-µm, and high stability after encapsulating a passivation layer. The electrical characteristics of n-channel a-IWO TFT are well-matched with p-channel poly-Si TFT for superior complementary metal-oxide-semiconductor technology applications. The inverter can exhibit a high voltage gain of 152 V V-1 at low supply voltage of 1.5 V. The noise margin can be up to 80% of supply voltage and perform the symmetrical window. The pico-watt static power consumption inverter is achieved by the wide energy bandgap of a-IWO channel and atomically-thin channel. The vertically-stacked complementary field-effect transistors (CFET) with high energy-efficiency can increase the circuit density in a chip to conform the development of next-generation semiconductor technology.

Ultralow-power Complementary Metal-Oxide-semiconductor Inverters Constructed on Schottky Barrier Modified Nanowire Metal-Oxide-semiconductor Field-Effect-transistors.

Hybrid Complementary Metal-Oxide-Semiconductor Inverters Based on Single Nanowires

High-performance Nanowire Complementary Metal-Semiconductor Inverters

Low‐Power Complementary Inverter with Negative Capacitance 2D Semiconductor Transistors

High-performance Heterogeneous Complementary Inverters Based on N-Channel MoS2 and P-Channel SWCNT Transistors

Ultrahigh-performance inverters based on CdS nanobelts.

Realization of Extremely High-Gain and Low-Power in nMOS Inverter Based on Monolayer WS2 Transistor Operating in Subthreshold Regime

Sub-kT/q Switching in In2O3 Nanowire Negative Capacitance Field-Effect Transistors

Low-power MoS2 metal–semiconductor field effect transistors (MESFETs) based on standard metal–semiconductor contact

How to Build Good Inverters from Nanomaterial-Based Transistors

Van der Waals negative capacitance transistors

A novel negative quantum capacitance field-effect transistor with molybdenum disulfide integrated gate stack and steep subthreshold swing for ultra-low power applications

Improved current saturation and shifted switching threshold voltage in In2O3 nanowire based, fully transparent NMOS inverters via femtosecond laser annealing

WSe2 N‐Type Negative Capacitance Field‐Effect Transistor with Indium Low Schottky Barrier Contact

High-Gain Hybrid CMOS Inverters by Coupling Cosputtered ZnSiSnO and Solution-Processed Semiconducting SWCNT

Heterogeneous Integration of Atomically-Thin Indium Tungsten Oxide Transistors for Low-Power 3D Monolithic Complementary Inverter

CdSe Nanowire-Based Flexible Devices: Schottky Diodes, Metal-Semiconductor Field-Effect Transistors, and Inverters.

Logic Gates Constructed on CdS Nanobelt Field-Effect Transistors with High-Κ HfO2 Top-Gate Dielectrics

Low-power-consumption CMOS Inverter Array Based on CVD-grown P-Mote2 and N-Mos2

Ultra Low Power Circuits Design Based on III-V Group Heterojunction Tunnel Field Effect Transistor

Ultra-Steep-Slope High-Gain MoS2 Transistors with Atomic Threshold-Switching Gate