Abstract:Nanoimprint lithography presents unique opportunities for advanced magnetic storage media with ordered bit arrangements such as bit patterned media or heated dot magnetic recording. Providing sub-10 nm resolution and full disk imprinting capability, UV-nanoimprint lithography based on rigid quartz templates bears the entitlement for patterned recording media manufacturing with high throughput at low cost. However, a key challenge is the fabrication of the high-resolution template that can transfer the desired pattern onto the disk with high fidelity and low line edge roughness. In this article, we present fabrication routes and overcome challenges to the fabrication of quartz templates suitable for self-alignment and guiding purposes to be used for template replication toward full disk imprints. Guiding patterns down to 40 nm pitch are prepared using a rotary electron beam lithography tool. We compare three different process approaches to fabricate an etching mask for patterning the quartz. Two methods target chromium patterning, one with traditional lift-off and another by dry etching, both using an e-beam resist mask. The third approach is based on the development of a carbon-based Tri-layer hard mask. The template pattern profile is optimized for imprint-suitable sidewall angles using dry etching in a CF4/O2 chemistry. The templates were characterized using scanning electron microscopy and atomic force microscopy to evaluate the quality of the transferred pattern as well as line edge roughness. Our results show that the Tri-layer process using carbon resulted in the lowest line edge roughness of ≈0.65 nm at the imprinted disk level. In addition, we show that Tri-layer masking allowed for the use of conventional ZEP e-beam resist and fast writing speeds, while gaining high selectivity during quartz patterning.

Duplication of Nanoimprint Templates by a Novel SU-8/SiO2/PMMA Trilayer Technique

Development of Novel SU-8 Based Nanoimprint Lithography

Applications Of Nanoimprint Lithography For Biochemical And Nanophotonic Structures Using Su-8

Template Fabrication on Soft Ultravialet Nanoimprint Lithography

Study of Nanoimprint Technology Without Residual Layer Based on Photolithography Mask

Fabrication of a Three-Layer SU-8 Mould with Inverted T-shaped Cavities Based on a Sacrificial Photoresist Layer Technique

Double transfer UV-curing nanoimprint lithography.

Fast Patterning and Dry-Etch of SiNxfor High Resolution Nanoimprint Templates

Single digit nanofabrication by step-and-repeat nanoimprint lithography

Cross-Linked Polymer Replica of A Nanoimprint Mold at 30 Nm Half-Pitch

Fabrication of Large-Area Nanostructures Using Cross-Nanoimprint Strategy

Nanoimprint Based on Spin-Coating

Free-standing SU-8 Gratings Fabricated by Sacrificial Layer-Assisted UV Curing Imprint

Nanoimprint Lithography of Multistep Loading

Enhanced Depth of Lift-off Pattern Defined with Soft Mold Ultraviolet Nanoimprint by Multi-Layer Masks

Optical Nanostructures Fabricated by Su-8 Based Nanoimprint Lithography

Nanoimprint lithography for complex 3D micro-nano structures replication under low temperature

Novel method to mass-produce PDMS stamps based on nanoimprint

A New Fabrication Method for 3D Multilayer Microstructure

High fidelity 3D thermal nanoimprint with UV curable polydimethyl siloxane stamps

Nanoimprint lithography guiding templates for advanced magnetic media fabrication