Abstract:Crevice corrosion in modular taper junctions of hip or knee replacements using cobalt-chrome-molybdenum (CoCrMo) alloys remains a clinical concern. Non-mechanically-driven corrosion has been less explored compared to mechanically assisted crevice corrosion. This study hypothesized that solution chemistry within crevices, inflammation, and cathodic electrode potential shifts during fretting result in low pH and generate reactive oxygen species (ROS), affecting oxide film behavior. This study investigated how resistance and capacitance of the CoCrMo oxide film (i.e., corrosion resistance) are modified in simulated in vivo crevice environments of modular taper junctions. Six solutions were evaluated (two pH levels: 1 and 7.4 and four hydrogen peroxide (H2O2) concentrations: 0, 0.001, 0.01 and 0.1 M). Rp versus voltage and Mott-Schottky plots were created from symmetry-based electrochemical impedance spectroscopy (sbEIS). At pH 1, the semiconductor transition to p-type occurs at more anodic potentials and higher flat band potentials were found. H2O2 decreased the flat band potential and slope in the Mott-Schottky plot. Higher H2O2 in pH 7.4 solution significantly modified the oxide film, leading to increased donor density (p = 0.0004) and a 150-fold reduction in Rp in the cathodic potential range at -1 V (p = 0.0005). The most unfavorable condition (0.1 M H2O2 pH 1) resulted in a 250-fold lower resistance compared to phosphate buffered saline (PBS) pH 7.4 at -1 V (p = 0.0013). This study highlights the corrosion susceptibility of CoCrMo under adverse chemical and potential conditions, identifying increased defects in the oxide film due to ROS, hydrogen ions and electrode potential. STATEMENT OF SIGNIFICANCE: : Corrosion of cobalt chrome molybdenum alloy caused by direct chemical attack in the crevice region of hip replacements, such as modular taper junctions, remains a clinical concern. The junction environment contains adverse chemical compositions, including high acidity and reactive oxygen species (ROS) due to inflammatory responses against the corrosion products. We simulate inflammatory environments with different pH levels and hydrogen peroxide, representative of ROS. We employ electrochemical impedance spectroscopy and apply stepwise voltage over the range induced by tribocorrosion processes. We relate the effect of adverse chemical components on corrosion and semiconducting behavior of the oxide film using Mott-Schottky analysis. This study shows how pH and ROS concentration compromises the oxide film potentially leading to non-mechanically induced corrosion.

Effect of electrode geometry and surface passivation on corrosion of polycrystalline silicon under high relative humidity and bias

Corrosion Mechanism and Surface Passivation Strategies of Polycrystalline Silicon Electrodes

Anodic oxidation of polycrystalline 3C-silicon carbide thin films during MEMS operation

Silicon Corrosion in Neutral Media: The Influence of Confined Geometries and Crevice Corrosion in Simulated Physiological Solutions

Influence of Polarized Bias and Porous Silicon Morphology on the Electrical Behavior of Au-porous Silicon Contacts

Characterizing metallization introduced polysilicon corrosion of surface micromachined structures with submicron capacitive gap

Metallization introduced corrosion and parylene protection of surface micromachined polysilicon film with submicron capacitive gap

Corrosion Assessment of Passivation Film Generated on Solder Surface in Artificial Sweat Solution

Etching and passivation of silicon in alkaline solution: A coupled chemical/electrochemical system

SiC Doping Impact during Conducting AFM under Ambient Atmosphere

Effect of Anisotropically-etched Silicon Electrode on Electrolytic Products Flow in Micro ECM

On the passivation mechanism of poly-silicon and thin silicon oxide on crystal silicon wafers

Heterogeneous Effects on Chemo-Mechanical Coupling Behaviors at the Single-Particle Level

In situ study the effects of bias and electric field intensity on electrochemical migration behavior of Sn96.5Ag3.0Cu0.5 solder alloy

A Shunt-Assisted Silicon Electrode for Micro Electrochemical Machining

The mechanical strength of polysilicon films: Part 1. The influence of fabrication governed surface conditions

Improving Reliability of Beveled Power Semiconductor Devices Passivated by SIPOS

Reactive Oxygen Species, Electrode Potential and pH Affect CoCrMo Alloy Corrosion and Semiconducting Behavior in Simulated Inflammatory Environments

Tribo-Electrochemical Performance of Polycrystalline Silicon during ECMP Simulating Process

Influence Of Anodization Current Density On Preparation And Corrosion Of N-Type Macroporous Silicon In 1.0 M Naoh