Abstract:Crevice corrosion in modular taper junctions of hip or knee replacements using cobalt-chrome-molybdenum (CoCrMo) alloys remains a clinical concern. Non-mechanically-driven corrosion has been less explored compared to mechanically assisted crevice corrosion. This study hypothesized that solution chemistry within crevices, inflammation, and cathodic electrode potential shifts during fretting result in low pH and generate reactive oxygen species (ROS), affecting oxide film behavior. This study investigated how resistance and capacitance of the CoCrMo oxide film (i.e., corrosion resistance) are modified in simulated in vivo crevice environments of modular taper junctions. Six solutions were evaluated (two pH levels: 1 and 7.4 and four hydrogen peroxide (H2O2) concentrations: 0, 0.001, 0.01 and 0.1 M). Rp versus voltage and Mott-Schottky plots were created from symmetry-based electrochemical impedance spectroscopy (sbEIS). At pH 1, the semiconductor transition to p-type occurs at more anodic potentials and higher flat band potentials were found. H2O2 decreased the flat band potential and slope in the Mott-Schottky plot. Higher H2O2 in pH 7.4 solution significantly modified the oxide film, leading to increased donor density (p = 0.0004) and a 150-fold reduction in Rp in the cathodic potential range at -1 V (p = 0.0005). The most unfavorable condition (0.1 M H2O2 pH 1) resulted in a 250-fold lower resistance compared to phosphate buffered saline (PBS) pH 7.4 at -1 V (p = 0.0013). This study highlights the corrosion susceptibility of CoCrMo under adverse chemical and potential conditions, identifying increased defects in the oxide film due to ROS, hydrogen ions and electrode potential. STATEMENT OF SIGNIFICANCE: : Corrosion of cobalt chrome molybdenum alloy caused by direct chemical attack in the crevice region of hip replacements, such as modular taper junctions, remains a clinical concern. The junction environment contains adverse chemical compositions, including high acidity and reactive oxygen species (ROS) due to inflammatory responses against the corrosion products. We simulate inflammatory environments with different pH levels and hydrogen peroxide, representative of ROS. We employ electrochemical impedance spectroscopy and apply stepwise voltage over the range induced by tribocorrosion processes. We relate the effect of adverse chemical components on corrosion and semiconducting behavior of the oxide film using Mott-Schottky analysis. This study shows how pH and ROS concentration compromises the oxide film potentially leading to non-mechanically induced corrosion.

Silicon Corrosion in Neutral Media: The Influence of Confined Geometries and Crevice Corrosion in Simulated Physiological Solutions

Corrosion Mechanism and Surface Passivation Strategies of Polycrystalline Silicon Electrodes

Thin, Transferred Layers of Silicon Dioxide and Silicon Nitride As Water and Ion Barriers for Implantable Flexible Electronic Systems

Degradation Study of Thin-Film Silicon Structures in a Cell Culture Medium.

Kinetics and Chemistry of Hydrolysis of Ultrathin, Thermally Grown Layers of Silicon Oxide As Biofluid Barriers in Flexible Electronic Systems

Effect of electrode geometry and surface passivation on corrosion of polycrystalline silicon under high relative humidity and bias

Artificial Solid Electrolyte Interphase to Address the Electrochemical Degradation of Silicon Electrodes

Reactive Oxygen Species, Electrode Potential and pH Affect CoCrMo Alloy Corrosion and Semiconducting Behavior in Simulated Inflammatory Environments

Corrosion Resistance and Cytocompatibility of Biodegradable Surgical Magnesium Alloy Coated with Hydrogenated Amorphous Silicon.

The influence of silicon on the formation and transformation of corrosion products

Longevity of Implantable Silicon-ICs for Emerging Neural Applications: Evaluation of Bare Die and PDMS-Coated ICs After Accelerated Aging and Implantation Studies

In Vitro Crevice Corrosion of Biodegradable Magnesium in Different Solutions

Porous silicon formation and electropolishing

Electrochemical Investigation of the Corrosion Properties of Three-Dimensional Nickel Electrodes on Silicon Microchannel Plates

Electrochemical Reactivity and Passivation of Silicon Thin-Film Electrodes in Organic Carbonate Electrolytes

Corrosion behavior of biomedical AZ91 magnesium alloy in simulated body fluids

Long-Lived, Transferred Crystalline Silicon Carbide Nanomembranes for Implantable Flexible Electronics

Investigating the Corrosion Resistance of Different SiC Crystal Types: From Energy Sectors to Advanced Applications

Failure Progression in the Solid Electrolyte Interphase (SEI) on Silicon Electrodes

A Physically Transient Form of Silicon Electronics

Etching and passivation of silicon in alkaline solution: A coupled chemical/electrochemical system