Abstract:The use of carbon fiber reinforced plastic (CFRP) is rapidly increasing in aerospace and automobile applications. This is in large part due to the increase strength and modulus of carbon fiber composites compared to other materials such as glass fiber composites. The fiber-matrix interface has been found to be important for high strength in composites. Methods that have been studied and developed to improve interfacial property of composites include: the addition of coupling agents, surface modifications, chemical reaction control and use of nano-fillers for reinforcement. During mechanical loading the shape of carbon fibers, in a composite, is altered with a concomitant change in electrical resistance. Carbon fibers are used as sensing elements in CFRP due to their electrical conductivity. In some more advanced studies, in CRFP, the carbon fibers were used for both strain sensing and damage sensing. The basic theory, in such studies, was that the movement of carbon fiber could be detected by electrical resistance measurement. During loading, the extent of contact between carbon fibers in a CF tow is altered, and the electrical resistance changes from its initial value. In this work, interfacial properties of carbon fiber/polymer composites were evaluated by such electrical resistance measurements. During the wetting process of CF tows by the polymer resins, the change in electrical resistance was recorded and analyzed. The test results for different carbon fibers and polymer resins exhibited different trends. The electrical resistance change was associated with the different wetting conditions, and the interfacial properties were predicted by these electrical resistance measurements. CF tow/epoxy exhibited the poorest carbon tow wettability, the smallest change in resistance and the poorest IFSS and ILSS. For the four systems studied, the relative change in each of these quantities for the materials of a given composite was roughly proportional to the other measured quantities. This may have some very significant practical importance. It may point the way to use quick easy tests to screen and predict other behaviors for composites of different materials and/or processes. Perhaps a simple resistance change test might be used to predict and select good candidate materials, surface processing techniques for high strength composite applications. The proportional relationship between interfacial adhesion and electrical resistance change was obtained by trend fitting line analyses. Ultimately, it was demonstrated that mechanical properties related to interfacial properties might potentially be predicted by electrical resistance measurement and studies of wetting behavior, using empirical formulas and correlations.

Characterization of the interphase width in carbon fibre reinforced epoxy resin composites

Characterization of the Interphase in Carbon Fiber/Polymer Composites Using A Nanoscale Dynamic Mechanical Imaging Technique

Characterization on topography and dimension of the interphase structure in carbon fiber composites

New Method for Interfacial Evaluation of Carbon Fiber/Thermosetting Composites by Wetting and Electrical Resistance Measurements

Interfacial Evaluation Of Carbon Frinforced Nano-Composites Using Electrical Resistance Measurement With Wetting Tests

Determining the interphase thickness and properties in carbon fiber reinforced fast and conventional curing epoxy matrix composites using peak force atomic force microscopy

Nano-analysis on the structure and chemical composition of the interphase region in carbon fiber composite

Nano-analysis on the Structure and Chemical Composition of the Interphase Region in Carbon Fiber Composite Part A Applied Science and Manufacturing

Investigation the interphase formation process of carbon fiber/epoxy composites using a multiscale simulation method

Investigation of the Nanoscale Mechanical Properties of Carbon Fiber/epoxy Resin Interphase. I. Analysis of Fiber‐stiffening Effect During the Nanoindentation Process Based on Numerical Simulation

Competition of Diffusion and Crosslink on the Interphase Region in Carbon Fiber/Epoxy Analyzed by Multiscale Simulations

Imaging the Interphase of Carbon Fiber Composites Using Transmission Electron Microscopy: Preparations by Focused Ion Beam, Ion Beam Etching, and Ultramicrotomy

Interface Probing by Dielectric Frequency Dispersion in Carbon Nanocomposites

The Interphase in Unidirectional Fiber-Reinforced Epoxies: Effect on Local Stress Fields

Residual Interlaminar Deformation Analysis in the Carbon/epoxy Composites Using Micro-Moiré Interferometry

Modeling and Mechanism of the Mechanical Interlocking for the Carbon Fiber/epoxy Interphase

Characterization of elastic modulus at glass/fiber interphase using single fiber composite tensile tests and utilizing DIC and FEM

Interphase formation and fiber matrix adhesion in carbon fiber reinforced epoxy resin: influence of carbon fiber surface chemistry

Characterization of Strain Field Distribution in Carbon Fiber Reinforced Resin Matrix Composites Using Electron Beam Moiré and Geometric Phase Analysis

In situ interfacial evaluation of aramid/epoxy composites by interfacial stress transfer characteristics

Interfacial Interaction of Carbon Fiber/Peek and Its Effect on the Mechanical Performance