Abstract:Understanding the mechanical properties of polymer nanocomposite materials is essential for industrial use. Particularly, the determination of the polymer modulus at the nanofiller-polymer interphase is important for optimizing the interfacial mechanical properties. Nanoindentation via Atomic Force Microscopy (AFM) is well established for measuring the modulus of the interphase region with nanoscale spatial resolution. However, indentation into heterogeneous materials presents a confounding issue often referred to as the "substrate effect", i.e., the structural stress field caused by the rigid body is convoluted with the actual modulus of the interphase region. While finite element analysis (FEA)-based methods can be used to deconvolute the interphase modulus from measured apparent modulus-distance profiles, the experimental validation of this method is still needed. Here, we provide this validation using AFM nanoindentation on a layered model composite which consists of three layers with different moduli to recapitulate the properties of the matrix, the filler, and the interphase of real polymer nanocomposites. By systematically varying the thickness of the “artificial” interphase layer and the AFM probe radius, we obtain modulus - distance profiles over a wide range of indentation conditions. We validate a method to deconvolute the substrate effect using an empirically derived master curve obtained from FEA analysis. Furthermore, we showed that the effect of the artificial interphase on modulus - distance profiles can be distinguished only if the interphase layer is thick enough compared to the contact radius of the probe. Finally, we established an innovative and quantitative framework to predict the interphase thickness from mechanical nanoindentation measurements, and we discussed the lower, practical limit for interphase thickness determination. In summary, we provide a broadly applicable method to extract interphase mechanical properties of multiphase soft materials, and practical guidelines for choosing optimal characterization conditions.

Investigation of the Nanoscale Mechanical Properties of Carbon Fiber/epoxy Resin Interphase. I. Analysis of Fiber‐stiffening Effect During the Nanoindentation Process Based on Numerical Simulation

Determination of the interfacial properties of carbon fiber reinforced polymers using nanoindentation

Characterization of the Interphase in Carbon Fiber/Polymer Composites Using A Nanoscale Dynamic Mechanical Imaging Technique

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

Pushing AFM to the boundaries — interphase mechanical property measurements near a rigid body

Nanoscale Evaluation of Multi-Layer Interfacial Mechanical Properties of Sisal Fiber Reinforced Composites by Nanoindentation Technique

Studying the Interfacial Properties of Carbon/Glass Hybrid Composites via the Nanoindentation Method

Nanoindentation measurement of core–skin interphase viscoelastic properties in a sandwich glass composite

Determination of Interphase Thickness and Mechanical Properties of Effective Nanofillers in Polymer Nanocomposites by Molecular Dynamic Simulation

In situ characterization of carbon fiber/epoxy composites by nanoindentation

Characterization on topography and dimension of the interphase structure in carbon fiber composites

Finite Element Modeling of Nanoindentation Response of Elastic Fiber-Matrix Composites

A novel approach based on stress-impedance effect to assess the interfacial properties in fiber-reinforced composites

Measuring Mechanical Properties of Micro- and Nano-Fibers Embedded in an Elastic Substrate: Theoretical Framework and Experiment

Modeling the Nanomechanical Responses of Biopolymer Composites During the Nanoindentation

Local Mechanical Behavior Mapping of A Biopolymer Blend Using Nanoindentation, Finite Element Computation, and Simplex Optimization Strategy

Determining the interphase thickness and properties in carbon fiber reinforced fast and conventional curing epoxy matrix composites using peak force atomic force microscopy

Investigation the interphase formation process of carbon fiber/epoxy composites using a multiscale simulation method

Mechanical Properties of 3D Carbon/carbon Composites by Nanoindentation Technique

Nano-analysis on the structure and chemical composition of the interphase region in carbon fiber composite

Vibration-based Identification of Interphase Properties in Long Fiber Reinforced Composites