Abstract:Understanding the mechanical properties of polymer nanocomposite materials is essential for industrial use. Particularly, the determination of the polymer modulus at the nanofiller-polymer interphase is important for optimizing the interfacial mechanical properties. Nanoindentation via Atomic Force Microscopy (AFM) is well established for measuring the modulus of the interphase region with nanoscale spatial resolution. However, indentation into heterogeneous materials presents a confounding issue often referred to as the "substrate effect", i.e., the structural stress field caused by the rigid body is convoluted with the actual modulus of the interphase region. While finite element analysis (FEA)-based methods can be used to deconvolute the interphase modulus from measured apparent modulus-distance profiles, the experimental validation of this method is still needed. Here, we provide this validation using AFM nanoindentation on a layered model composite which consists of three layers with different moduli to recapitulate the properties of the matrix, the filler, and the interphase of real polymer nanocomposites. By systematically varying the thickness of the “artificial” interphase layer and the AFM probe radius, we obtain modulus - distance profiles over a wide range of indentation conditions. We validate a method to deconvolute the substrate effect using an empirically derived master curve obtained from FEA analysis. Furthermore, we showed that the effect of the artificial interphase on modulus - distance profiles can be distinguished only if the interphase layer is thick enough compared to the contact radius of the probe. Finally, we established an innovative and quantitative framework to predict the interphase thickness from mechanical nanoindentation measurements, and we discussed the lower, practical limit for interphase thickness determination. In summary, we provide a broadly applicable method to extract interphase mechanical properties of multiphase soft materials, and practical guidelines for choosing optimal characterization conditions.

Pushing AFM to the boundaries — interphase mechanical property measurements near a rigid body

Investigation of Near-Surface Mechanical Properties of Materials Using Atomic Force Microscopy

Direct Measurement of Plowing Friction and Wear of a Polymer Thin Film Using the Atomic Force Microscope

AFM Nanoindentation of Stiff Inhomogeneous Layer on Polymeric Substrate

Determination of the interfacial properties of carbon fiber reinforced polymers using nanoindentation

In Situ Nanoindentation Mechanical Property of Films by Atomic Force Microscope

Study of Elastic Modulus and Yield Strength of Polymer Thin Films Using Atomic Force Microscopy

Characterization of the Interphase in Carbon Fiber/Polymer Composites Using A Nanoscale Dynamic Mechanical Imaging Technique

Optimizing the accuracy of viscoelastic characterization with AFM force-distance experiments in the time and frequency domains

Measuring the Interfacial Thickness of Immiscible Polymer Blends by Nano-probing of Atomic Force Microscopy

Probabilistic Estimation of Mechanical Properties of Biomaterials Using Atomic Force Microscopy

Using the Adhesive Interaction Between Atomic Force Microscopy Tips and Polymer Surfaces to Measure the Elastic Modulus of Compliant Samples

Features of the study of binder state near the filler particles in elastomeric composites using an atomic-force microscope

Nanostructure and Mechanical Measurement of Highly Oriented Lamellae of Melt-Drawn HDPE by Scanning Probe Microscopy

Measuring biomaterials mechanics with atomic force microscopy. 1. Influence of the loading rate and applied force (pyramidal tips)

Investigation of the nanostructure and nanomechanical properties of the interphase in carbon fiber reinforced polyamide-6 composite

Determining the thickness and modulus of the nano-metric interphase region using macroscopic modulus data in exfoliated polymer-clay nanocomposites

Exploring the Challenges of Characterising Surface Topography of Polymer-Nanoparticle Composites

Identification and design of novel polymer-based mechanical transducers: A nano-structural model for thin film indentation

A comprehensive study of AFM stiffness measurements on inclined surfaces: theoretical, numerical, and experimental evaluation using a Hertz approach

AFM Indentation on Highly Heterogeneous Materials Using Different Indenter Geometries