Abstract:FT Raman Spectroscopy was used to study the interphasial structure in carbon fiber/polyetheretherketone (CF/PEEK) composites. Spectra of APC 2 laminates with different thermo mechnical histories show a broad band around 1300 cm-1 distinctive either to the A1g scattering of carbon fiber or to PEEK overtones, suggesting different PEEK structure in composites compared to neat resin. To simulate formation of the interphasial structure in the composites, AS4 fiber was coated with PEEK through its chlorophenon solution. The FT Raman study of the coated fibers reveals that the 1300 cm-1 band originates from overlapping of the dispersive branches of graphite A1g and PEEK ring C—O scattering. Comparison of the spectra of coated fibers with those of the melted ones reveals profound effects of melting on interphasial structure. Raman spectra of the unmelted coatings were dominated by E2g and non dispersive A1g branches of graphite and localized modes of PEEK. When melted, the spectra became highly dependent on coaling thichness. When thickness of PEEK layer is about a dozen of nanometer, the broad band around 1600 cm-1 can be found stronger compared to that of unmelted coatings. The band center shifted to lower wavenumber when coating thickness decreased. When the PEEK coating approached the order of nanometer, spectra typical to amorphous and mesophase carbon were found. The results suggest that the structure of the polymer near carbon fiber must be different from that in the bulk if PEEK is allowed to melt. The structure difference is discernible at least on two scales, one identical to the dimension of chain coil and another to thickness of the segments. While structure on the latter scale needs further work to be understood more explicitly, the limited results hinted matching of graphite crystallites with the polymer segments. Within a dozen of nanometers to the fiber surface orientation of the ether ether ketone segments are no doubt stronger than those in neat PEEK. It was thus deducted that interphase forms in composite during processing through interaction of the EEK segments with graphite in short range neighbor to carbon fiber surface and chain orientation within a larger range of tens of nanometers.

Nano-analysis on the Structure and Chemical Composition of the Interphase Region in Carbon Fiber Composite Part A Applied Science and Manufacturing

Nano-analysis on the structure and chemical composition of the interphase region in carbon fiber composite

Imaging the Interphase of Carbon Fiber Composites Using Transmission Electron Microscopy: Preparations by Focused Ion Beam, Ion Beam Etching, and Ultramicrotomy

Characterization of the Interphase in Carbon Fiber/Polymer Composites Using A Nanoscale Dynamic Mechanical Imaging Technique

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

Surface Characteristics of Different Cross-Section Carbon Fibers and Its Effect on Interfacial Adhesion Properties of Composite

Characterization on topography and dimension of the interphase structure in carbon fiber composites

Investigation the interphase formation process of carbon fiber/epoxy composites using a multiscale simulation method

Investigation of the nanostructure and nanomechanical properties of the interphase in carbon fiber reinforced polyamide-6 composite

A STUDY OF INTERFACIAL STRUCTURE IN CARBON FIBER/POLYETHERETHERKETONE COMPOSITES WITH FT-RAMAN SPECTROSCOPY

Competition of Diffusion and Crosslink on the Interphase Region in Carbon Fiber/Epoxy Analyzed by Multiscale Simulations

Investigation of the Nanoscale Mechanical Properties of Carbon Fiber/epoxy Resin Interphase. I. Analysis of Fiber‐stiffening Effect During the Nanoindentation Process Based on Numerical Simulation

ATOM FORCE MICROSCOPE STUDY ON INTERPHASE CHARACTER OF CARBON FIBER/POLYARYLACETYLENE COMPOSITES

Determining the interphase thickness and properties in carbon fiber reinforced fast and conventional curing epoxy matrix composites using peak force atomic force microscopy

Characterization of the interphase width in carbon fibre reinforced epoxy resin composites

Interfacial Interaction of Carbon Fiber/Peek and Its Effect on the Mechanical Performance

Research on Structure and Performance of Different Micro-zone in Carbon/Carbon Composites

Micro- and nano-structural investigations of C/C composites

Interphase formation and fiber matrix adhesion in carbon fiber reinforced epoxy resin: influence of carbon fiber surface chemistry

Effect of Surface Decoration of CNTs on the Interfacial Interaction and Microstructure of Epoxy/mwnt Nanocomposites.

Transmission Electron Microscopy Study of the Microstructure of Carbon/carbon Composites Reinforced with in Situ Grown Carbon Nanofibers