Abstract:Since fiber-matrix interface strength is critical to properties of carbon fiber-reinforced composites, measurement and analysis of interface strength are crucial steps in tailored design of composites. In the present work, the single fiber push-out test and the short-beam shear test were applied to measure the fiber-matrix interface strength in uni-directionally and two-directionally carbon fiber-reinforced phenolic resin matrix composites. The technical difficulties in processing the specimen and in realizing the fiber push-out were also discussed and clarified. For obtaining the successful test, typically, the thickness of the specimen should be smaller than 100 mm. During the fiber push-out, the de-bonding and fiber sliding at the interface were analyzed from the load-displacement curve features. The results indicated that both methods could be applied to determine the interface strength. The single fiber push-out and the short-beam shear tests resulted in a similar phenomenon in regard to the interface strength of uni-directionally and two-directionally carbon fiber-reinforced phenolic resin matrix composites, but expressed different values. The low interface strength measured from the short-beam shear test could be associated with multiple interlaminar shear failures. Furthermore, it was found that the interface strength of uni-directionally carbon fiber-reinforced phenolic resin matrix composites is somewhat higher than that of two-directionally carbon fiber-reinforced phenolic resin matrix composites. The difference in the interface strength could be attributed to the thermally induced residual stresses caused by the coefficient of thermal expansion mismatch of fiber and matrix. The approaches applied in the current work can be used for the evaluation of the interface strength of carbon fiber-reinforced phenolic resin matrix composites with different fiber-matrix bonding properties.

Characterization of elastic modulus at glass/fiber interphase using single fiber composite tensile tests and utilizing DIC and FEM

Pre-use Interfacial Shear Strength Prediction for Fiber-Reinforced Thermosetting Composites Based on Stress-Impedance Effect of Ferromagnetic Microwires

A novel approach based on stress-impedance effect to assess the interfacial properties in fiber-reinforced composites

Characterization of the Interphase in Carbon Fiber/Polymer Composites Using A Nanoscale Dynamic Mechanical Imaging Technique

The Dynamic Constants of Unidirectional Fibrous Composites at the Glass Transition Region as Obtained from the Interphase Concept

Elastic Property Evaluation of Fiberglass and Epoxy Resin Composite Material Using Digital Image Correlation

A Mechanical Study of a Glass Fabric-Thermoplastic Resin Composite: 3D-DIC and X-ray tomographic observations explained by numerical simulations based on a spectral solver

Estimation of Aramid Fiber/epoxy Interfacial Properties by Fiber Bundle Tests and Multiscale Modeling Considering the Fiber Skin/core Structure

Micromechanical Analysis of Glass Fiber/Epoxy Lamina

Full-field investigation of dissipative mechanisms and thermoelastic inversion effects within glass-fiber reinforced polyamides subjected to low-cycle fatigue

Digital Image Correlation Analysis of Strain Fields in Fibre-Reinforced Polymer–Matrix Composite under ±45° Off-Axis Tensile Testing

Anisotropic Mechanical Response and Strain Localization of a Metallic Glassy-Fiber-Reinforced Polyethylene Terephthalate Fabric

Modeling of Interphases in Fiber-Reinforced Composites under Transverse Loading Using the Boundary Element Method

Assessment Of Interfacial Adhesion Between Carbon Fiber And Epoxy By Transverse Fiber Bundle And Single Fiber Fragmentation Tests

Material Characterization of Hybrid Composite: Experimental Using Strain Gauge/DIC with Finite Element Modelling Macro/Micro Scale

Thermal expansion coefficients of fiber composites defined by the concept of the interphase

Measurement and analysis of fiber-matrix interface strength of carbon fiber-reinforced phenolic resin matrix composites

Inverse determine the interfacial strength and surface geometry effects concerning carbon fiber reinforced epoxy composites by experiment aided FFT‐based spectral analysis

Elastic Constants of Polymeric Fiber Composite Estimation Using Finite Element Method

Investigation on Cf/PyC Interfacial Properties of C/C Composites by the Molecular Dynamics Simulation Method

Multiscale analysis method and experiments for the transverse mechanical property of unidirectional fiber-reinforced composites