Abstract:Based on an improved shear-lag model, the effect of an inhomogeneous interphase on the mechanism of stress transfer in fiber-reinforced composites is investigated. The inhomogeneity of the interphase is represented by the graded feature of the Young’s modulus varying according to a power law or a linear one in the radius direction, while the Poisson’s ratio and thermal expansion coefficient are assumed to be constants. Considering the effects of the inhomogeneous interphase as well as the Poisson’s contraction and thermal residual stress, closed-form solutions to the axial fiber stress and interfacial shear stress are obtained analytically. Comparing the case with a power law to that with a linear one, we find that the fiber stress increases significantly in the former case, while it decreases slightly in the latter one with an increasing interphase thickness. With the same external tensile load and interphase thickness, it is found that the fiber in the power law case is subjected to a larger tensile stress than that in the linear variation one. However, the interfacial shear stress is not sensitive to the interphase thickness in both cases, except that near the two ends of fiber. Under the same external load, the maximum shear stress in the interphase is much smaller in the latter than that in the former. All the phenomena can be characterized by one parameter, i.e., the average Young’s modulus of interphase, and denote that an interphase with a power variation law is more effective for stress transfer while the linearly graded one is more advantageous to avoid shear failure. The results should be helpful for engineers to properly design the interphase in novel composites, e.g. a carbon-fiber reinforced epoxy one.

The Interphase in Unidirectional Fiber-Reinforced Epoxies: Effect on Local Stress Fields

The Effect of a Graded Interphase on the Mechanism of Stress Transfer in a Fiber-Reinforced Composite

On the Static and Dynamic Properties of Fiber-Reinforced Polymer Composites: A Three-Phase Constitutive Model

A novel approach based on stress-impedance effect to assess the interfacial properties in fiber-reinforced composites

Effect Of Physical Interphase On Magneto-Electro-Elastic (Meej Composites Under Far-Field Loading

Modeling of Interphases in Fiber-Reinforced Composites under Transverse Loading Using the Boundary Element Method

Thermal expansion coefficients of fiber composites defined by the concept of the interphase

Debonding mechanisms in the presence of an interphase in composites

Rethinking Interphase Representations for Modeling Viscoelastic Properties for Polymer Nanocomposites

Characterization of the Interphase in Carbon Fiber/Polymer Composites Using A Nanoscale Dynamic Mechanical Imaging Technique

EFFECT OF GRADUAL INTERPHASE ON ELASTIC PROPERTIES OF COMPOSITES

Effect of Interphase Layer on Matrix Cracking in Fiber Reinforced Ceramic Matrix Composites

Finite Element-Based Phase-Field Simulation of Interfacial Damage in Unidirectional Composite under Transverse Tension

Investigation of the Nanoscale Mechanical Properties of Carbon Fiber/epoxy Resin Interphase. I. Analysis of Fiber‐stiffening Effect During the Nanoindentation Process Based on Numerical Simulation

Effect of Heterogeneous Interphase on the Mechanical Properties of Unidirectional Fiber Composites Studied by FFT-based Method

Finite Element Analysis of Thermal Residual Stress in Unidirectional Fiber Reinforced Composite

STUDY ON INTERFACIAL THERMAL RESIDUAL STRESS OF SINGLE-FIBER RESIN MATRIX COMPOSITE MATERIALS

A Microscale Analysis of Thermal Residual Stresses in Composites with Different Ply Orientations

The Effects of Thermal Residual Stresses and Interfacial Properties on the Transverse Behaviors of Fiber Composites with Different Microstructures

Effects of thermal stress and imperfect interfacial bonding on the mechanical behavior of composites subjected to off-axis loading

The Fiber-Matrix Interfacial Stress on and Beneath the Surface of Long-Fiber-Reinforced Composites