Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

A Micromechanical Model for Interpenetrating Multiphase Composites

Effective Elastic and Plastic Properties of Interpenetrating Multiphase Composites

Micromechanics methods for evaluating the effective moduli of soft neo-Hookean composites

Modeling of Multi-Inclusion Composites with Interfacial Imperfections: Micromechanical and Numerical Simulations

A Stochastic Micromechanical Model for Multiphase Composites Containing Spherical Inhomogeneities

Micromechanical modeling of mechanical properties of composite materials

Effective moduli for micropolar composite with interface effect

Micromechanical Analysis Of Nonlinear Response On Fibrous Composite

Micromechanical model and overall properties of CNT/SMP composites with aggregated inclusions

Influence of Microstructure on Effective Mechanical Properties of Composite Material

Micromechanical approach to the elastoplastic behavior of a fiber reinforced composite

A Micromechanical Model for Phase-Change Composites

Effective Elastic Properties of Transversely Isotropic Matrix Based Composites

On micromechanics approach to stiffness and strength of unidirectional composites

Effective in Plane Moduli of Composites with a Micropolar Matrix and Coated Fibers

A Micromechanical Method for Particulate Composites with Finite Particle Concentration

Iterative Method to Predict Effective Elastic Moduli of Multiphase Particulate Composites

Closed-Form Interacting Solutions for Overall Elastic Moduli of Composite Materials with Multi-Phase Inclusions, Holes and Microcracks

Simulation of the mechanical properties of fibrous composites by the bridging micromechanics model

Micromechanical modeling of unidirectional composites with random fiber and interphase thickness distributions

A simplified micromechanical model for predicting effective mechanical behaviors of continuous bidirectional-fiber-reinforced composites