Abstract:The use of carbon fiber reinforced plastic (CFRP) is rapidly increasing in aerospace and automobile applications. This is in large part due to the increase strength and modulus of carbon fiber composites compared to other materials such as glass fiber composites. The fiber-matrix interface has been found to be important for high strength in composites. Methods that have been studied and developed to improve interfacial property of composites include: the addition of coupling agents, surface modifications, chemical reaction control and use of nano-fillers for reinforcement. During mechanical loading the shape of carbon fibers, in a composite, is altered with a concomitant change in electrical resistance. Carbon fibers are used as sensing elements in CFRP due to their electrical conductivity. In some more advanced studies, in CRFP, the carbon fibers were used for both strain sensing and damage sensing. The basic theory, in such studies, was that the movement of carbon fiber could be detected by electrical resistance measurement. During loading, the extent of contact between carbon fibers in a CF tow is altered, and the electrical resistance changes from its initial value. In this work, interfacial properties of carbon fiber/polymer composites were evaluated by such electrical resistance measurements. During the wetting process of CF tows by the polymer resins, the change in electrical resistance was recorded and analyzed. The test results for different carbon fibers and polymer resins exhibited different trends. The electrical resistance change was associated with the different wetting conditions, and the interfacial properties were predicted by these electrical resistance measurements. CF tow/epoxy exhibited the poorest carbon tow wettability, the smallest change in resistance and the poorest IFSS and ILSS. For the four systems studied, the relative change in each of these quantities for the materials of a given composite was roughly proportional to the other measured quantities. This may have some very significant practical importance. It may point the way to use quick easy tests to screen and predict other behaviors for composites of different materials and/or processes. Perhaps a simple resistance change test might be used to predict and select good candidate materials, surface processing techniques for high strength composite applications. The proportional relationship between interfacial adhesion and electrical resistance change was obtained by trend fitting line analyses. Ultimately, it was demonstrated that mechanical properties related to interfacial properties might potentially be predicted by electrical resistance measurement and studies of wetting behavior, using empirical formulas and correlations.

Residual Interlaminar Deformation Analysis in the Carbon/epoxy Composites Using Micro-Moiré Interferometry

New Method for Interfacial Evaluation of Carbon Fiber/Thermosetting Composites by Wetting and Electrical Resistance Measurements

A Study on Residual Stresses in Polymer Composites Using Moiré Interferometry

Interfacial Evaluation Of Carbon Frinforced Nano-Composites Using Electrical Resistance Measurement With Wetting Tests

Understanding the Impact of Fibre Wrinkle Architectures on Composite Laminates Through Tailored Gaps and Overlaps

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Measurement Of Residual Strain And Stress In Fiber-Reinforced Composite By Electron Moire Method

Measurement of strain concentration factor of composites plate using moire interferometry

Characterization of the Interphase in Carbon Fiber/Polymer Composites Using A Nanoscale Dynamic Mechanical Imaging Technique

Application of Moiré Interferometry to the Characterization of Orthotropic Materials in the Antisymmetric Configuration Using the Virtual Fields Method

Micro-moiré methods with high resolution microscopes and their applications

Influence of co-deposition modification on mode I and II interlaminar toughness of epoxy laminates interleaved with waste textiles using experimental measurement and finite element technique

A Microscale Analysis of Thermal Residual Stresses in Composites with Different Ply Orientations

Direct visualization of interfacial debonding in FRP structure using an AIE molecule

Elastic Property Evaluation of Fiberglass and Epoxy Resin Composite Material Using Digital Image Correlation

Multi-Directional Strain Measurement in Fiber-Reinforced Plastic Based on Birefringence of Embedded Fiber Bragg Grating

In situ interfacial evaluation of aramid/epoxy composites by interfacial stress transfer characteristics

Thermo-Chemo-Mechanical Modeling of Residual Stress in Unidirectional Carbon Fiber-Reinforced Polymers during Manufacture

Application of Moiré Interferometry to Study Residual Deformation in Lap-Welded Steel Plates

In-plane deformation measurement using the atomic force microscope moiré method

Image-Based Inertial Impact Test for Composite Interlaminar Tensile Properties