Abstract:Split Hopkinson pressure bar (SHPB) is a widely used experimental technique for testing materials at a high strain-rate. SHPB testing of fiber-reinforced polymer (FRP) composite samples have become common in recent decades. Specimen geometry is one of the essential parameters that can ease sample fabrication and help in-situ analysis when altered as per convenience. Further, developing a computationally accurate model would reduce the need for multiple experimental iterations, thus saving cost and time. As part of the current study, high strain-rate tests using a compressive SHPB setup were conducted on glass/epoxy (GE) laminated composite samples of both square prismatic and cylindrical shape along the through-thickness direction experimentally. Negligible differences were observed due to the change in specimen geometry. Further, we know that the woven fabric consists of yarns, which are a bundle of fibers. The strain-rate dependency of the epoxy's material property is well known, but very limited information is available about the strain-rate dependency of yarn's properties. The effect of strain-rate dependency of the yarn was analysed numerically on Abaqus software using a square prismatic shaped yarn-level finite element composite model. The homogenised properties of the yarn were taken to be reflective of a high fiber volume fraction composite. The bulk epoxy's and yarn's material property were defined using the Johnson-Cook (JC) constitutive model, and the failure mechanism was defined using the JC damage model. One of the primary reasons for using this model is its availability and ease of implementation in almost every finite element analysis (FEA) simulation software. Three cases were analysed numerically, first keeping both yarn and bulk matrix property strain-rate dependent, second keeping the strain-rate dependency only in the bulk matrix, and in third case both yarn and matrix were kept strain-rate independent. It was observed that completely strain-rate dependent model showed comparable peak stress and strain values with the experimental result than other models.

A Study on Residual Stresses in Polymer Composites Using Moiré Interferometry

Residual Interlaminar Deformation Analysis in the Carbon/epoxy Composites Using Micro-Moiré Interferometry

Investigation of Residual Stress in 2D Plane Weave Aramid Fibre Composite Plates Using Moiré Interferometry and Hole‐Drilling Technique

Measurement of strain concentration factor of composites plate using moire interferometry

Measurement Of Residual Strain And Stress In Fiber-Reinforced Composite By Electron Moire Method

Theoretical and Experimental Studies on Residual Stresses of Advanced Polymer Composites

Analysis of residual transverse stresses in a thick UD glass/polyester pultruded profile using hole drilling with strain gage and digital image correlation

Measurement of Non-Uniform Residual Stresses by Combined Moiré Interferometry and Hole-Drilling Method: Theory, Experimental Method and Applications

Experimental Study on Residual Stress Measurement Methods of Moiré Interferometry Based on Ring-Core and Slitting

Thermo-Chemo-Mechanical Modeling of Residual Stress in Unidirectional Carbon Fiber-Reinforced Polymers during Manufacture

A Microscale Analysis of Thermal Residual Stresses in Composites with Different Ply Orientations

Application of Moiré Interferometry to the Characterization of Orthotropic Materials in the Antisymmetric Configuration Using the Virtual Fields Method

Experimental and numerical study of the effects of fiber orientation on stress concentration of CFRE

Application of Moiré Interferometry to Study Residual Deformation in Lap-Welded Steel Plates

Microscale viscoplastic analysis of unidirectional CFRP composites under the influence of curing process

Digital Image Correlation Analysis of Strain Fields in Fibre-Reinforced Polymer–Matrix Composite under ±45° Off-Axis Tensile Testing

Study of the location of testing area in residual stress measurement by Moiré interferometry combined with hole-drilling method

Investigation of anisotropy effects in glass fibre reinforced polymer composites on tensile and shear properties using full field strain measurement and finite element multi-scale techniques

Experimental Study of the Residual Stress of Integrated Composite Structure

Investigation on the Mechanical Properties of Epoxy Resin with Void Defects Using Digital Image Correlation and Image-Based Finite Element Method

Finite element modelling and experimentation of plain weave glass/epoxy composites under high strain-rate compression loading for estimation of Johnson-Cook model parameters