Abstract:Journal of Reinforced Plastics and Composites, Ahead of Print. Carbon fiber reinforced composites are broadly employed, as structural members, in many industrial applications especially in the avionic industry due to their high strength-to-weight ratio. Circular holes are commonly used in these members for fastening, bearing, reducing weight, and others. Therefore, several experimental and analytical studies were introduced to figure out the stress concentration behavior around the vicinity of the holes under different loading conditions. However, no reports are delivered to study the effect of fiber orientation on the stress concentration factor of unidirectional carbon fiber reinforced epoxy (CFRE) composites with a hole under tension. Thus, the current work is targeted to understand the relationship between stress concentration factor (SCF) and fiber orientation in CFRE orthotropic plates. The unnotched and notched composite samples, with four different fiber orientations, were experimentally investigated in a tension test. The SCF of samples was calculated using analytical and computational FE methods. The failure criterion of open-hole tensile (OHT) test samples was also analyzed. The experimental results demonstrated that there is no significant effect of fiber orientation on the normalized strength. Yet based on the stiffness matrix of isotropic materials, a pronounced effect of the fiber orientation on the SCF is detected when using analytical calculations. The present research arises the need for further investigations to find a correlation between experimental and analytical results of SCF in unidirectional CFRE with a central hole at different fiber orientations.

Investigation of Residual Stress in 2D Plane Weave Aramid Fibre Composite Plates Using Moiré Interferometry and Hole‐Drilling Technique

Understanding the Impact of Fibre Wrinkle Architectures on Composite Laminates Through Tailored Gaps and Overlaps

A Study on Residual Stresses in Polymer Composites Using Moiré Interferometry

Hole-drilling Method Using Grating Rosette and Moiré Interferometry

Experimental determination of residual stresses in composite laminates [02/θ2]s

Experimental determination of residual stresses in composite laminates [0(2)/theta(2)](s)

Measurement of Residual Stresses in Fiber Reinforced Composite Material

FE Analysis of Stress Concentrations in Composite Plates with Multiple Holes for Zigzag Multi-Fastened Joints

Relationship Between the Depth of Drilling and Residual Strain Relief in Fiber Reinforced Composite Materials

Measurement of strain concentration factor of composites plate using moire interferometry

On the Sensing and Calibration of Residual Stresses Measurements in the Incremental Hole-Drilling Method

Measurement of Non-Uniform Residual Stresses by Combined Moiré Interferometry and Hole-Drilling Method: Theory, Experimental Method and Applications

Comprehensive investigation of cutting mechanisms and hole quality in dry drilling woven aramid fibre–reinforced plastic with typical tools

Investigation of the mechanical and forming behaviour of 3D warp interlock carbon woven fabrics for complex shape of composite material

Experimental Study of the Residual Stress of Integrated Composite Structure

Numerical and Experimental Investigation on Mechanical Responses of Plain Woven CFRP Composite under Various Loading Cases

Experimental and numerical study of the effects of fiber orientation on stress concentration of CFRE

Residual stress in fiber reinforced thermosetting composites: A review of measurement techniques

Quasi-static mechanical behavior of 2.5D woven variable thickness composites

Study of the location of testing area in residual stress measurement by Moiré interferometry combined with hole-drilling method

Experimental Investigations on the In-Plane Dynamic Compressive Behavior and Upper Limit of Constant Strain Rate for 2D Twill Weave Carbon Fiber Reinforced Composite