Abstract:Residual stress in multilayer coatings is a complex phenomenon influenced by layer number and thickness, layer and substrate materials, deposition technique, process parameters, and working pressure. It is crucial to realize these stresses because they have a significant impact on the performance and reliability of multilayer structures in their applications. The measurement of the residual stress on multilayer thin films locally and globally is crucial. This study employed ring-core milling residual stress measurement on the High-Power Impulse Magnetron Sputtering (HiPIMS) fabricated Tungsten/Copper (W/Cu) Chromium/Copper (Cr/Cu) multilayer thin films. The displacement transformation strain was analyzed using Focused Ion Beam (FIB) ring-core milling combined with Digital Image Correlation (DIC), and the strain stress transformation calibration coefficients were analyzed through Finite Element Method (FEM) to investigate the residual stress of the thin films layer by layer. The study results indicated that the hard thin films (W, Cr) were the main source of residual stress in the multilayer thin film structure, while the soft thin film (Cu) had a lower residual stress. Having Cu as the intermediate layer was found to be effective for controlling the residual stress of thin films. The hard thin films encapsulated by the soft thin films had smaller stress values than those with hard films on the surface. In addition, the study observes the stress gradient and distribution at different depths and locations on the sample to reveal process parameters to balance between the soft and hard thin films and could help to predict the location of the damage on the multilayer thin films caused by higher stress.

Experimental Study on Residual Stress Measurement Methods of Moiré Interferometry Based on Ring-Core and Slitting

Study on Measurement Method of Interior Stress Distributions in Engineering Rolled-Plates

A Micro-Scale Strain Rosette for Residual Stress Measurement by SEM Moiré Method

Study of the location of testing area in residual stress measurement by Moiré interferometry combined with hole-drilling method

Residual Stresses Measurement by Using Ring-Core Method and 3d Digital Image Correlation Technique

Measurement of Non-Uniform Residual Stresses by Combined Moiré Interferometry and Hole-Drilling Method: Theory, Experimental Method and Applications

A Study on Residual Stresses in Polymer Composites Using Moiré Interferometry

Study of Local Stress Using Stress-Absorbing Si Diaphragm

AN OPTICAL STRAIN ROSETTE/RING-CORE METHOD APPLIED ON LASER WELD

Measurement Of Residual Strain And Stress In Fiber-Reinforced Composite By Electron Moire Method

Separation of Contact Stress Components by Moire Interferometry

Measurement of strain concentration factor of composites plate using moire interferometry

Application of Moiré Interferometry to Study Residual Deformation in Lap-Welded Steel Plates

Characterization of Residual Stress in SOI Wafers by Using MEMS Cantilever Beams

FIB-DIC ring-core measurement of the residual stress on HiPIMS W/Cu and Cr/Cu multilayer thin films

Residual Stress Assessment of Interconnects by Slot Milling with Fib and Geometric Phase Analysis

Residual Stress Measurement in Thin Films Using a Slitting Method with Geometric Phase Analysis under a Dual Beam (FIB/SEM) System

Determination of Residual Stress Distribution Combining Slot Milling Method and Finite Element Approach

Focused Ion Beam Nano-Machined Structures for Strain Analysis by A Moiré Technique

Discrete Loading Ring-Core Method for Nonuniform In-Plane Residual Stress Analysis in Micro Area

A curved surface micro-moiré method and its application in evaluating curved surface residual stress