Abstract:The virtual fields method (VFM) is a novel highly efficient non-iterative tool for the identification of the constitutive parameters of materials. The VFM can obtain several constitutive parameters based on the full-field deformation of the specimen measured in a single test. However, the available results demonstrate that the accuracy of the identification result is strongly dependent on the quality of the deformation field, which is generally measured using optical methods. Especially, in the case where a small deformation is applied under elastic loading, the image noise and measurement error will exhibit a significant influence on the identification results. By combining the VFM with moiré interferometry (MI), a MI-based VFM is used to identify the parameters of an orthotropic linear elastic material. A numerical experiment is conducted to examine the feasibility of this method. From the analysis results, we determine that two factors exhibit an influence on the identification accuracy. The reinforcement direction of the orthotropic material is one factor, and the other is the noise in the deformation field. This MI-based VFM is then applied to determine the mechanical parameters of a unidirectional carbon fiber composite material. In the measurement, a three-point bending load is applied to the specimens. A high density grating with a frequency of 1200line/mm grating is replicated on the specimen surface and used for measuring the in-plane deformation fields using a moiré interferometer. The obtained deformation fields are taken as the inputs of the VFM identification process, and the elastic properties of the materials are identified. The obtained results verify the advantage of the proposed method with respect to high accuracy and good noise immunity.

Separation of Contact Stress Components by Moire Interferometry

Application of Moire Interferometry to A Contact Problem

Experimental Study on Residual Stress Measurement Methods of Moiré Interferometry Based on Ring-Core and Slitting

Application of Moiré Interferometry to the Characterization of Orthotropic Materials in the Antisymmetric Configuration Using the Virtual Fields Method

A Novel Method for Identifying Constitutive Parameters Based on Moiré Interferometry Fringe Pattern

Analysis of Displacement and Strain Field Around a Bimaterial Interfacial Region by Stress Couple Theory and Experiment

Identification of Contact Stress on Non-conforming Contact Interface Based on Local Displacement Measurement

Virtual fields method coupled with moiré interferometry: Special considerations and application

Polarized shearing Moiré interferometry

The Reverse Multiplicate Method of Moire Interferometry and Application to Measure Deformation of Microelectronics Package

Application of Moiré Interferometry to Study Residual Deformation in Lap-Welded Steel Plates

Modeling and Experimental Identification of Contact Pressure and Friction for the Analysis of Non-Conforming Elastic Contact

Measurement of Non-Uniform Residual Stresses by Combined Moiré Interferometry and Hole-Drilling Method: Theory, Experimental Method and Applications

Measurement of strain concentration factor of composites plate using moire interferometry

Design and experimental verification of phase-reversal Fresnel lens for contact stress characterization

Polarized Shearing-Moire Interferometry for Separated 3-D Strain Fringe Patterns

Local contact stress measurements at a rough interface

Frictional Adhesive Contact of Multiferroic Coatings Based on the Hybrid Element Method

Evaluation of interfacial misfit strain field of heterostructures using STEM nano secondary moiré method

Investigation of strain in individual multi-walled carbon nanotube by a novel moiré method

Experimental studies on the interfacial separation and stiffness of rough elastic-plastic solids