Abstract:Electron beam lithography is a critical technology for achieving high-precision nanoscale patterning. The presence of resist residues in the structures can significantly affect subsequent processes such as etching and lift-off. However, the evaluation and optimization of resist residues currently relies on qualitative observations like scanning electron microscopy (SEM), necessitating multiple experiments to iteratively optimize exposure parameters, which is not only labor-intensive but also costly. Here, we propose a quantitative method to evaluate resist residues. By processing the obtained SEM images using a threshold segmentation algorithm, we segmented the resist structure region and the residual resist region in the images. The grayscale values of these two regions are identified, and the residues are quantified based on the ratio of these values. Furthermore, a relationship curve between the residue amount and the exposure dose is plotted to predict the optimal exposure dose. To validate this method, we fabricated hydrogen silsesquioxane annular grating structures with 30 nm linewidth and analyzed the residue levels over an exposure dose range of 2000-2500μC cm-2, predicting the optimal dose to be 1800μC cm-2and confirming this through experiments. Additionally, we applied the method to polymethyl methacrylate and ZEP-520A structures, achieving similarly accurate results, further confirming the method's general applicability. This method has the potential to reduce experimental costs and improve yield and production efficiency in nano fabrication.

Process Research of Novel Electron Beam Lithography Resist Calixarene Used in Nanofabrication

Photolithography Using Lateral Surface of Nanofibers

Electron Beam Lithography Application on the Nanofabrication and Nanodevice

A process study of electron beam nano-lithography and deep etching with an ICP system

Quantitative evaluation of residual resist in electron beam lithography based on scanning electron microscopy imaging and thresholding segmentation algorithm

Microfabrication of Nano-Scale Feature Lines

The exposure process study of 100KV JBX-6300LS electron-beam nanolithograph system

Chemically Amplified Fullerene Resists for E-Beam Lithography

Scanning probe lithography on calixarene towards single-digit nanometer fabrication

Performance of a high resolution chemically amplified electron beam resist at various beam energies

A New Chemically Amplified Resist for High Resolution Patterning by E-Beam Lithography

Solvent-Free Nanofabrication Based on Ice-Assisted Electron-Beam Lithography.

Formation of Anti-Etching Nanopatterns in Field-Emission Scanning Probe Lithography on Calixarene Films

Electron Beam Lithography: CO2‐Based Dual‐Tone Resists for Electron Beam Lithography (adv. Funct. Mater. 13/2021)

Fabrication and electrical characteristics of carbon nanotube-based microcathodes for use in a parallel electron-beam lithography system

A Chemically Amplified Fullerene-Derivative Molecular Electron-Beam Resist

Chemically Amplified Phenolic Fullerene Electron Beam Resist

Carbon films for use as the electron source in a parallel e-beam lithography system

Fullerene Resist Materials for the 32 Nm Node and Beyond

CO2‐Based Dual‐Tone Resists for Electron Beam Lithography

Process Study of ZEP520 Positive Electron Beam Resist