Abstract:Resistive random access memory (RRAM) technologies based on non-volatile resistive filament redox switching oxides have the potential of drastically improving the performance of future mass-storage solutions. However, the physico-chemical properties of the TiN bottom metal electrode (BME) can significantly alter the resistive switching (RS) behavior of the oxygen-vacancy RRAM devices, yet the correlation between RS and the physico-chemical properties of TiN and HfOx/TiN interface remains unclear. Here, we establish this particular correlation via detailed material and electrical characterization for the purpose of achieving further performance enhancement of the stack integration. Two types of RRAM stacks were fabricated where the TiN BME was fabricated by physical vapor deposition (PVD) and atomic layer deposition (ALD), respectively. The HfOx layer in HfOx/PVD-TiN is more oxygen deficient than that of the HfOx/ALD-TiN because of more defective PVD-TiN and probably because pristine ALD-TiN has a thicker TiO2 overlayer. Higher concentration of oxygen vacancies induces a larger magnitude of band bending at the HfOx/PVD-TiN interface and leads to the formation of a higher Schottky barrier. Pulsed endurance measurements of up to 106 switches, with 10 μA ± 1.0 V pulses, demonstrate the potential of the studied ultra-thin-HfOx/TiN device stack for dense, large scale, and low-power memory integration.

Title Fabrication and Electrical Characterization of MONOS Memorywith Novel High-Κ Gate Stack

Multibit Non-Volatile Memory Based on WS2 Transistor with Engineered Gate Stack

Multistacked Al2O3∕HfO2∕SiO2 Tunnel Layer for High-Density Nonvolatile Memory Application

Reliability and Memory Characteristics of Sequential Laterally Solidified Low Temperature Polycrystalline Silicon Thin Film Transistors with an Oxide–Nitride–Oxide Stack Gate Dielectric

Electronic Structure and Charge-Trapping Characteristics of the Al2O3-TiAlO-SiO2 Gate Stack for Nonvolatile Memory Applications

Improved Memory Characteristics of A Novel TaN/Al2O3/TiO2/HfO2/SiO2/Si Structured Charge Trapping Memory

Fabrication and Characterization of A Novel Fully Self-Aligned Split-Gate Sonos Memory Device

Modeling of High-k Gate Stack of Tunnel Barrier in Nonvolatile Memory MOS Structures

High-performance Amorphous In-Ga-Zn-O Thin-Film Transistor Nonvolatile Memory with a Novel P-Sno/n-sno2 Heterojunction Charge Trapping Stack

A Flexible Memory with Low-Voltage and High-Operation Speed Using an Al2O3/poly(α-methylstyrene) Gate Stack on a Muscovite Substrate

Modeling and Simulation for the Enhancement of Electron Storage in A Stacked Multilayer Nanocrystallite Silicon Floating Gate Memory

Effect of Oxide Layers on MONOS Device Performance Based on TCAD Simulation

Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering

A novel structure designed for high density nonvolatile memory devices

Outstanding Memory Characteristics with Atomic Layer Deposited Ta2O5/Al2O3/TiO2/Al2O3/Ta2O5 Nanocomposite Structures As the Charge Trapping Layer

A Semi-Floating Gate Memory Based on SOI Substrate by TCAD Simulation

Memory Switching and Threshold Switching in a 3D Nanoscaled NbO X System

The Roles of the Dielectric Constant and the Relative Level of Conduction Band of High-K Composite with Si in Improving the Memory Performance of Charge-Trapping Memory Devices

Performance Enhancement of Metal Floating Gate Memory by Using A Bandgap Engineered High-K Tunneling Barrier

Design and Fabrication of Ta$_{2}$O $_{5}$ Stacks for Discrete Multibit Memory Application