Abstract:To comprehensively reveal the influence regularity of different glass melting temperatures on the ultraviolet (UV) laser-induced damage resistance of fluoride-containing phosphate glasses, the initial bulk damage, damaged growth, and dynamic behaviors of both fundamental-frequency (1ω) absorptive and third-harmonic-frequency (3ω) transparent fluoride-containing phosphate glasses are explored utilizing the time-resolved pump–probe shadowgraph technique. A low-temperature (1000 °C) glass melting process resulted in an increase in the absorption coefficient at 355 nm and decrease in the optical bandgap for the 1ω absorptive glass. The produced 1ω absorptive glass was subjected to higher shock pressure and shock temperature on the rear surface after a single-pulse laser irradiation, and had a more serious filamentation damage accompanied by a funnel-shape morphology. With the subsequent multiples irradiation, the initial bulk damage area increased exponentially with a growth coefficient of 0.72. The corresponding exponential growth coefficient for the counterpart 1ω absorptive glass melted at a high temperature (1200 °C) was only 0.32 due to its slight initial bulk damage. In contrast, for the 3ω transparent glass, the high-temperature (1200 °C) melting process led to a larger initial bulk damage area and largest exponential growth coefficient of 0.91, 1.1 times that of the 3ω transparent glass melted at a low temperature (1000 °C). They exhibited wave-packed damaged morphologies extending from the rear surface into the glass body. The melting temperatures exhibited the opposite influence regularity for these two investigated fluoride-containing phosphate glasses. The high-temperature (1200 °C) melting process favored the improvement in UV laser-induced damage resistance of the 1ω absorptive glass, as evidenced by the higher UV laser-induced damage threshold and lower damage growth coefficient, while the low-temperature (1000 °C) melting process exerted similar effects on the 3ω transparent glass.

Experimental Investigation of Enhancing the Subsurface Damage Threshold of Nd-Doped Phosphate Glass

Experimental Investigation on Laser-Induced Surface Damage Threshold of Nd-Doped Phosphate Glass

Improvement For The Surface Damage Resistance Of Nd-Doped Phosphate Glass

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Study on surface modification and optical properties of Nd-doped phosphate glass

Optical and Thermal Properties of A New Nd-Doped Phosphate Laser Glass

Water Corrosion of Commercial Neodymium-Doped Phosphate High-Peak-power Laser Glass

Investigation of laser induced damage on K9 glass surface using multi-pulse laser

Damage Behavior of Nd:glass of High-Power Disk Amplifier Medium in ICF Facility

Bulk damage growth characteristics and ultrafast diagnosis of fluoride-containing phosphate glasses induced by 355-nm laser

Experimental investigation on thermal healing of subsurface damage in borosilicate glass

Laser-induced damage properties of antireflective porous glasses

Laser-induced fluorescence and its effect on the damage resistance of fluoride-containing phosphate-based glasses

Reduced threshold ultraviolet laser ablation of glass substrates with surface particle coverage: A mechanism for systematic surface laser damage

(INVITED) Impurities in Large Scale Produced Nd-doped Phosphate Laser Glasses. I. Cu Ions

Characteristics of Laser-Induced Surface and Bulk Damage of Large-Aperture Deuterated Potassium Dihydrogen Phosphate at 351 Nm

Characterization of artificial indentation defects in fused silica surface and its damage performance under 355 nm nanosecond laser

Non-destructive testing of subsurface damage for early indication of laser-induced damage threshold in fused silica

An ion beam processing technology for complex component glass

Advanced Mitigation Process (AMP) for Improving Laser Damage Threshold of Fused Silica Optics

Optimized monolithic edge-cladding glass for N31-type Nd-doped high power laser glass