Abstract:Non-uniform temperature field in optical transparent glasses induced by high power Gaussian laser irradiation would introduce temperature gradient which will cause thermal lens effects inside materials. Such thermal lens influences on long pulse laser processing are usually omitted in previous studies. However, thermally-induced refractive index change in situ could have a relatively large impact on subsequent incident laser especially under the action of high power laser. In order to obtain a quantitatively transient results of thermal lens effects caused by long pulse laser, we carried out numerical simulations of temperature rise, refractive index change and their influences on light trail in K9 glass heated by a millisecond pulse laser. Different laser energy and glass thickness were applied to reveal the dependence of thermal lens and laser and glass parameters. Results show that the thermal lens effects would increase refractive index in K9 glass and reconverge subsequent laser beam consequently whose amplitude is proportional to incident laser power and glass thickness. The simulation results are compared with the previous experimental results and are consistent in magnitude of refractive index change. But there is a certain gap in refractive index field distribution in the direction of laser radius due to the neglect of influence of refractive index raise to susequent lasers in temperature simulations. This work would provide a reference in the field of millisecond pulse laser processing optical transparent materials.

Investigation of laser induced damage on K9 glass surface using multi-pulse laser

Study On The Morphology Of Laser Induced Damage In K9 Glass By Focused Nanosecond Pulse

Researches on Laser Damage Resistance of Optical Films

Laser Induced Damage Morphology of K9 Glass with Nanosecond Pulse

Bulk Damage of High Intensity Laser and K9 Optical Glass

Optical Characteristics of the Undamaged and Laser Damaged K9 Glass in Terahertz Band

Shock induced damage and damage threshold of optical K9 glass investigated by laser-driven shock wave

Influence of laser focusing position on damage of K9 glass

Analysis of damage threshold of K9 glass irradiated by 248-nm KrF excimer laser

Simulation study on laser damage threshold of optical window materials

Recent Advances in Laser-Induced Surface Damage of KH2PO4 Crystal

Influence of the high-repetition-pulsed laser beam size on the damage characteristics of absorbing glass

Transient Dynamic Behavior During Nanosecond Laser-Induced Damage Initiated by Surface Defects on KDP Crystals with Simulation and Experimental Method

Research on damage mechanism of K9 glass irradiated by pulsed CO_2 laser based on simulate calculation

Picosecond laser induced periodic surface structures on K9 glass

Experimental Investigation on Laser-Induced Surface Damage Threshold of Nd-Doped Phosphate Glass

Analytic Calculation and Evaluation of Thermal and Mechanical Damage in Optical Materials Induced by Laser

Laser-Induced Damage Initiation and Growth of Optical Materials

Numerical Simulations of Thermal Lens Effect in K9 Glass Induced by Millisecond Laser Irradiation

Experimental Investigation of Enhancing the Subsurface Damage Threshold of Nd-Doped Phosphate Glass

An investigation on 800 nm femtosecond laser ablation of K9 glass in air and vacuum